Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

TMC2074

Status: In Production

Features:

  • Low Power CMOS, 3.3 Volt Power Supply with 5 Volt Tolerant I/O
  • Both 86xx and 68hxx Platforms
  • Sequential I/O Mapped Access
  • Maximum 31 Nodes per Network
  • Token Retry Mechanism
  • Maximum 256 Bytes per Packet
  • Consecutive Node ID Assignment
  • Shared Memory within Network
  • Network Time Synchronization
  • Automatic Time Stamping
  • Intelligent 1-Bit Error Correction
  • Magnetic Saturation Prevention
  • Peripheral (Host) Mode Operates with MCU
  • Standalone (I/O) Mode Operates without MCU
  • Supports 8 Bit Programmable General Purpose I/O at Peripheral Mode
  • Supports 16 Bit Input and 16 Bit Output at Standalone Mode
  • Free Format Mode
  • Remote Buffer Mode
  • 1 Internal and 2 External
  • Bus, Star, and Tree
  • RS485 Differential Driver
  • Fiber Optics and Twisted Pair Cable Supported
  • 128-Pin, VTQFP RoHS Compliant Package
  • Temperature Range from 0 to 70 Degrees C
View More
Overview
Documents
Development Environment
Similar Devices
RoHS Information
Add To Cart

Device Overview

Summary

The TMC2074 network controller is CircLink technology's flagship product. The TMC2074's flexibility and rich feature set enable a high-reliability and high-performance, real-time and control-oriented network without the cumbersome middle layer protocol stacks and complex packet prioritization schemes typically required.

TMC2074 operates at network data transfer rates up to 5 Mbps. Its embedded 1 kByte RAM can be configured into a maximum of 32 pages to implement a 31-node network where each node in the network has the same local memory.

The TMC2074 has two operational modes: "Peripheral Mode" and "Standalone Mode". It can operate with or without the existence of a system CPU on a network node. In Peripheral Mode, the TMC2074 has two selectable communication modes, "Free Format Mode" and "Remote Buffer Mode". Free Format mode, retained from ARCNET, is "packet oriented" communication. Remote Buffer mode communication is a CircLink-specific feature, and is a token oriented communication, which includes automatic data transmission when the token arrives.

The TMC2074 has a flexible 8-bit or 16-bit databus to interface various CPU types including X86, 68XX, and SHX with multiplexed or non-multiplexed address/data. When operating in Peripheral mode, the TMC2074 has 8-bit programmable I/O available. When operating in Standalone mode, the TMC2074's I/O configuration is16-bit. The TMC2074 also integrates a 3-port hub (two ports for external connection) to accommodate various network topologies (Bus, Star, etc.) and combinations.

Additional Features

    Features

    • Low Power CMOS, 3.3 Volt Power Supply with 5 Volt Tolerant I/O
    • Supports 8/16-Bit Data Bus
      • Both 86xx and 68hxx Platforms
    • 1K On-chip Dual Port Buffer Memory
      • Sequential I/O Mapped Access
    • Enhanced Token Passing Protocol from ARCNET
      • Maximum 31 Nodes per Network
      • Token Retry Mechanism
      • Maximum 256 Bytes per Packet
      • Consecutive Node ID Assignment
    • Memory Mirror
      • Shared Memory within Network
    • Network Standard Time
      • Network Time Synchronization
      • Automatic Time Stamping
    • Coded Mark Inversion
      • Intelligent 1-Bit Error Correction
      • Magnetic Saturation Prevention
    • Dual Operation Modes
      • Peripheral (Host) Mode Operates with MCU
      • Standalone (I/O) Mode Operates without MCU
    • Supports 8 Bit Programmable General Purpose I/O at Peripheral Mode
    • Supports 16 Bit Input and 16 Bit Output at Standalone Mode
    • Dual Communication Modes (with Peripheral Mode)
      • Free Format Mode
      • Remote Buffer Mode
    • 3 Port Hub Integrated
      • 1 Internal and 2 External
    • Flexible Topologies
      • Bus, Star, and Tree
    • Low-Cost Media can be Used
      • RS485 Differential Driver
    • Fiber Optics and Twisted Pair Cable Supported
    • 128-Pin, VTQFP RoHS Compliant Package
    • Temperature Range from 0 to 70 Degrees C
Parametrics
Name
Value
Standalone Arcnet Cntrl
Yes
MAC
Yes
TX/RX RAM Buffer(Bytes)
8K
Deterministic Protocola (Token Passing)
Yes
Operating Voltage (V)
3.3V
Max Speed (MHz)
5 Mbps
Interface
RS485
Temp Range Max (°C)
70
Comments
Peripheral & Standalono mode Circlink Controller

Documents

Jump to:

Development tools data is currently unavailable.

Similar Devices

Product
Price 5K
$6.27
$13.91
$15.80
$25.84
$13.37
$11.91
$12.36
$6.74

RoHS Information

Part Number
Device Weight (g)
Shipping Weight (grams)
Lead Count
Package Type
Package Width
Solder Composition
JEDEC Indicator
RoHS
China EFUP
TMC2074-NU
0.557500
1.800000
128
TQFP
14x14x1mm
Matte Tin
e3
To see a complete listing of RoHS data for this device, please Click here
Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.

Buy from the Microchip Store

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy