Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

PIC32MX470F512L

Status: In Production

Features:

  • 120 MHz/150 DMIPS, MIPS32® M4K® core
  • USB 2.0-compliant Full-speed OTG controller
  • Two I2S/SPI modules for Codec and serial communications
  • Peripheral Pin Select (PPS) functionality
  • Parallel Master Port (PMP) for graphics interfaces
  • Charge Time Measurement Unit (CTMU)
  • Temperature Range - 40°C to 105°C
  • Operating voltage range of 2.3V to 3.6V
  • 512KB Flash memory (plus an additional 12 KB of Boot Flash)
  • 128KB SRAM memory
  • MIPS16e® mode for up to 40% smaller code size
  • Pin-compatible with most Microchip 16-bit devices
  • Low-power management modes (Idle and Sleep)
  • Peripheral Pin Select (PPS) functionality
  • Up to 4 channels of hardware DMA with automatic data size detection
  • Five UARTs and two I2C™ modules
  • Hardware Real-Time Clock and Calendar (RTCC)
  • Five 16-bit Timers/Counters (two 16-bit pairs combine to create two 32-bit timers)
  • Five Capture inputs and Five Compare/PWM outputs
  • External graphics interface with up to 34 PMP pins
  • Audio data communication: I2S, LJ, RJ, USB
  • Audio data control interface: SPI and I2C™
  • Generation of fractional clock frequencies
  • Can be synchronized with USB clock
  • Can be tuned in run-time
  • Supports mTouch™ capacitive touch sensing
  • Provides high-resolution time measurement (1 ns)
  • On-chip temperature measurement capability
  • 10-bit 1Msps rate with one Sample and Hold (S&H)
  • Up to 28 analog inputs
  • Can operate during sleep mode
  • Two dual-input Comparator modules
  • Programmable references with 32 voltage points
  • In-circuit and in-application programming
  • 4-wire MIPS® Enhanced JTAG interface
  • Unlimited program and six complex data breakpoints
  • IEEE 1149.2-compatible (JTAG) boundary scan
View More
Overview
Documents
Development Environment
Similar Devices
RoHS Information
Add To Cart

Device Overview

Summary

                                                                                                                                                                                                                     

Additional Features

      Key Features

      • 120 MHz/150 DMIPS, MIPS32® M4K® core
      • USB 2.0-compliant Full-speed OTG controller
      • Two I2S/SPI modules for Codec and serial communications
      • Peripheral Pin Select (PPS) functionality
      • Parallel Master Port (PMP) for graphics interfaces
      • Charge Time Measurement Unit (CTMU)
      • Temperature Range - 40°C to 105°C

        Microcontroller Features

        • Operating voltage range of 2.3V to 3.6V
        • 512KB Flash memory (plus an additional 12 KB of Boot Flash)
        • 128KB SRAM memory
        • MIPS16e® mode for up to 40% smaller code size
        • Pin-compatible with most Microchip 16-bit devices
        • Low-power management modes (Idle and Sleep)

          Peripheral Features

          • Peripheral Pin Select (PPS) functionality
          • Up to 4 channels of hardware DMA with automatic data size detection
          • Five UARTs and two I2C™ modules
          • Hardware Real-Time Clock and Calendar (RTCC)
          • Five 16-bit Timers/Counters (two 16-bit pairs combine to create two 32-bit timers)
          • Five Capture inputs and Five Compare/PWM outputs

            Audio/Graphics/Touch HMI Features

            • External graphics interface with up to 34 PMP pins
            • Audio data communication: I2S, LJ, RJ, USB
            • Audio data control interface: SPI and I2C™
            • Audio data master clock:
              • Generation of fractional clock frequencies
              • Can be synchronized with USB clock
              • Can be tuned in run-time
            • Charge Time Measurement Unit (CTMU):
              • Supports mTouch™ capacitive touch sensing
              • Provides high-resolution time measurement (1 ns)
              • On-chip temperature measurement capability

              Advanced Analog Features

              • ADC Module:
                • 10-bit 1Msps rate with one Sample and Hold (S&H)
                • Up to 28 analog inputs
                • Can operate during sleep mode
              • Comparators:
                • Two dual-input Comparator modules
                • Programmable references with 32 voltage points

              Debugger Development Support

              • In-circuit and in-application programming
              • 4-wire MIPS® Enhanced JTAG interface
              • Unlimited program and six complex data breakpoints
              • IEEE 1149.2-compatible (JTAG) boundary scan
            Parametrics
            Name
            Value
            Part Family
            PIC32MX4xx
            Max CPU Speed MHz
            120
            Program Memory Size (KB)
            512
            SRAM (KB)
            128
            Auxiliary Flash (KB)
            12
            Temperature Range (C)
            -40 to 105
            Operating Voltage Range (V)
            2.3 to 3.6
            Direct Memory Access Channels
            4
            SPI
            2
            I2C
            2
            CODEC Interface (I2S,AC97)
            Yes
            Peripheral Pin Select / Pin Muxing
            Yes
            CTMU test
            Yes
            Number of USB Modules
            1
            USB Interface
            FS Device/Host/OTG
            ADC Input
            28
            Max ADC Resolution (Bits)
            10
            Max ADC Sampling Rate (ksps)
            1000
            Input Capture
            5
            Standalone Output Compare/Standard PWM
            5
            Max 16-bit Digital Timers
            5
            Parallel Port
            PMP
            Number of Comparators
            2
            Internal Oscillator
            8 MHz, 32 kHz
            Hardware RTCC/RTC
            Yes
            Max I/O Pins
            85
            Pincount
            100

            Documents

            Jump to:

            Programming Specifications

            Application Notes

            Download All

            Reference Manuals

            Download All

            Development Environment

            • Emulators & Debuggers
            • Programmers
            • Demo & Evaluation Boards
            • Software Libraries
            • Code Examples
            Emulators & Debuggers
            MPLAB PICkit 4 In-Circuit Debugger
            MPLAB PICkit 4 In-Circuit Debugger ( PG164140 )

            Fast programming, increased functionality, at the same price as its predecessor, the PICkit™ 3.

            The MPLAB PICkit 4 now has Programmer-to-Go functionality for 8-bit and 32-bit PIC MCUs. The firmware update comes with MPLAB X IDE v5.25. More to come!


            The MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast and easy debugging and

            ...

            Learn More
            Add To Cart
            MPLAB ICD 4 In-Circuit Debugger
            MPLAB ICD 4 In-Circuit Debugger ( DV164045 )

            The MPLAB® ICD 4 In-Circuit Debugger/Programmer is Microchip’s fastest, cost-effective debugging and programming tool for PIC® and SAM Microcontrollers (MCUs), dsPIC® Digital Signal Controllers (DSCs), and CEC flash microcontrollers. This speed is provided by a SAME70 MCU with 300 MHz, 32-bit MCU with 2MB of RAM and a high-speed FPGA to yield

            ...

            Learn More
            Add To Cart
            PICkit 3 In-Circuit Debugger
            PICkit 3 In-Circuit Debugger ( PG164130 )
            (Not Recommended for new design)

            The PICkit 3 is not recommended for new designs and no new device support will be added to it as of June 1, 2019. For new designs, please see the MPLAB PICKit 4.

            Microchip’s PICkit™ 3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to

            ...

            Learn More
            MPLAB ICD 3 In-Circuit Debugger
            MPLAB ICD 3 In-Circuit Debugger ( DV164035 )
            (Not Recommended for new design)

             The MPLAB ICD 3 is a mature product and no new device support will be added to it as of June 1, 2019. For new designs, consider using the MPLAB ICD 4 (DV164045)

            MPLAB® ICD 3 In-Circuit Debugger System is Microchip's most cost effective high-speed hardware debugger/programmer for

            ...

            Learn More
            MPLAB REAL ICE PROBE KIT
            MPLAB REAL ICE PROBE KIT ( DV244005 )
            (Not Recommended for new design)

             

            Not recommended for new designs and no new device support will be added to it as of June 1, 2019. For new designs, please consider the MPLAB ICD 4 (DV164045).

            MPLAB REAL ICE In-Circuit Emulator System is Microchip’s next generation high speed emulator for

            ...

            Debug Features:
            Instruction trace:Supported


            Learn More
            MPLAB(R) Snap In-Circuit Debugger
            MPLAB(R) Snap In-Circuit Debugger ( PG164100 )

            Our most affordable debugger has power to impress.

            The MPLAB® Snap In-Circuit Debugger/Programmer allows affordable, fast and easy debugging and programming of most PIC®, dsPIC®, AVR and SAM flash MCUs, using the powerful graphical user interface of MPLAB X Integrated Development Environment (IDE) version 5.05 or later. The MPLAB Snap can be connected to a computer

            ...

            Learn More
            Add To Cart
            J-32 Debug Probe
            J-32 Debug Probe ( DV164232 )

            The J-32 Debug Probe Debugger/Programmer provides affordable, fast and easy debugging and programming for Microchip’s PIC32 and SAM MCU and MPU products. It is fully integrated into Microchip’s powerful MPLAB® X Integrated Development Environment and easy-to-use Integrated Programming Environment. Connecting existing hardware is simple as it keeps the Segger

            ...

            Learn More
            Add To Cart
            Programmers
            MPLAB PICkit 4 In-Circuit Debugger
            MPLAB PICkit 4 In-Circuit Debugger ( PG164140 )

            Fast programming, increased functionality, at the same price as its predecessor, the PICkit™ 3.

            The MPLAB PICkit 4 now has Programmer-to-Go functionality for 8-bit and 32-bit PIC MCUs. The firmware update comes with MPLAB X IDE v5.25. More to come!


            The MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast and easy debugging and

            ...

            Learn More
            Add To Cart
            MPLAB ICD 4 In-Circuit Debugger
            MPLAB ICD 4 In-Circuit Debugger ( DV164045 )

            The MPLAB® ICD 4 In-Circuit Debugger/Programmer is Microchip’s fastest, cost-effective debugging and programming tool for PIC® and SAM Microcontrollers (MCUs), dsPIC® Digital Signal Controllers (DSCs), and CEC flash microcontrollers. This speed is provided by a SAME70 MCU with 300 MHz, 32-bit MCU with 2MB of RAM and a high-speed FPGA to yield

            ...

            Learn More
            Add To Cart
            PICkit 3 In-Circuit Debugger
            PICkit 3 In-Circuit Debugger ( PG164130 )
            (Not Recommended for new design)

            The PICkit 3 is not recommended for new designs and no new device support will be added to it as of June 1, 2019. For new designs, please see the MPLAB PICKit 4.

            Microchip’s PICkit™ 3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to

            ...

            Learn More
            MPLAB PM3 Universal Device Programmer
            MPLAB PM3 Universal Device Programmer ( DV007004 )

            The MPLAB® PM3 Universal Device Programmer is easy to use and operates with a PC or as a stand-alone unit, and programs Microchip's entire line of PIC® devices as well as the latest dsPIC® DSC devices. When used standalone, data can be loaded and saved with the SD/MMC card (not included).

            • Socket: AC164323   PartNo: PIC32MX470F512L (100PF)
            • Socket: AC164333   PartNo: PIC32MX470F512L (100PT)
            • Socket: AC164418   PartNo: PIC32MX470F512L (124TL)
            Learn More
            Add To Cart
            MPLAB ICD 3 In-Circuit Debugger
            MPLAB ICD 3 In-Circuit Debugger ( DV164035 )
            (Not Recommended for new design)

             The MPLAB ICD 3 is a mature product and no new device support will be added to it as of June 1, 2019. For new designs, consider using the MPLAB ICD 4 (DV164045)

            MPLAB® ICD 3 In-Circuit Debugger System is Microchip's most cost effective high-speed hardware debugger/programmer for

            ...

            Learn More
            MPLAB REAL ICE PROBE KIT
            MPLAB REAL ICE PROBE KIT ( DV244005 )
            (Not Recommended for new design)

             

            Not recommended for new designs and no new device support will be added to it as of June 1, 2019. For new designs, please consider the MPLAB ICD 4 (DV164045).

            MPLAB REAL ICE In-Circuit Emulator System is Microchip’s next generation high speed emulator for

            ...

            Learn More
            MPLAB(R) Snap In-Circuit Debugger
            MPLAB(R) Snap In-Circuit Debugger ( PG164100 )

            Our most affordable debugger has power to impress.

            The MPLAB® Snap In-Circuit Debugger/Programmer allows affordable, fast and easy debugging and programming of most PIC®, dsPIC®, AVR and SAM flash MCUs, using the powerful graphical user interface of MPLAB X Integrated Development Environment (IDE) version 5.05 or later. The MPLAB Snap can be connected to a computer

            ...

            Learn More
            Add To Cart
            J-32 Debug Probe
            J-32 Debug Probe ( DV164232 )

            The J-32 Debug Probe Debugger/Programmer provides affordable, fast and easy debugging and programming for Microchip’s PIC32 and SAM MCU and MPU products. It is fully integrated into Microchip’s powerful MPLAB® X Integrated Development Environment and easy-to-use Integrated Programming Environment. Connecting existing hardware is simple as it keeps the Segger

            ...

            Learn More
            Add To Cart
            Demo & Evaluation Boards
            PIC32 I/O Expansion Board
            PIC32 I/O Expansion Board ( DM320002 )

            The Starter Kit I/O Expansion Board provides Starter Kit and Starter Board users with full access to MCU signals, additional debug headers, and connection of PICtail Plus daughter cards. MCU signals are available for attaching prototype circuits or monitoring signals with logic probes. Headers are provided for connecting JTAG tools or Microchip tools using the 2-wire (ICSP) interface....

            Learn More
            Add To Cart
            PIC32 USB Starter Kit III
            PIC32 USB Starter Kit III ( DM320003-3 )

            The PIC32 USB starter kit – III provides the user with an easy and cost effective option to experience the USB, mTouch and SPI/I2S functionality of the new PIC32MX3/MX4 microcontrollers. The board comes equipped with everything that is needed including Microchip’s free USB software to develop USB embedded host/device/OTG applications.

            The PIC32 USB starter kit - III

            ...

            Learn More
            Add To Cart
            PIC32 Bluetooth Audio Development Kit
            PIC32 Bluetooth Audio Development Kit ( DV320032 )
            (Not Recommended for new design)

            The PIC32 Bluetooth® Audio Development Kit provides a comprehensive solution to develop Bluetooth A2DP audio streaming solutions and applications. The board is coupled with two daughter cards: the Bluetooth HCI Radio Daughter Card that demonstrates a low cost Bluetooth implementation and the Audio DAC Daughter Card that demonstrates a high quality 16/24-bit, 32-192 KHz audio...

            Learn More
            Add To Cart
            PIC32MX450/470 100-pin to 100-pin USB PIM
            PIC32MX450/470 100-pin to 100-pin USB PIM ( MA320002-2 )

            Processor Plug-In Modules are small circuit boards to be used with the various Microchip Development Boards to evaluate various MCU families. These plug into the main processor socket of the Development Boards so that different microcontrollers can be used for prototyping, demonstration or development --quickly and easily.

            The capabilities of PIC32MX3/MX4 family of devices can be

            ...

            Learn More
            Add To Cart
            Software Libraries
            ADPCM and Speex (Audio) Library for PIC32 MCUs

            AAC Decoder Libraries for PIC32MX for MLA based

            Advanced Audio Coding (AAC) is a standardized lossy compression technique used for encoding digital audio...

            Learn More
            Microchip Certified Class B Safety Software Library for 16 bit & PIC32 MCUs

            Learn More
            PIC32 Peripheral Library

            Summary

            The PIC32 Peripheral Library provides a set of functions for setting up and controlling the operation of all the peripheral modules available in the PIC32 devices. The...

            Learn More
            Smart Card ISO-7816 Library for PIC18F, PIC24/dsPIC and PIC32 Microcontrollers


            Microchip’s smart card library supports PIC18, PIC24, dsPIC and PIC32 microcontrollers; it provides the

            ...

            Learn More

            Similar Devices

            Product
            Pins
            Flash (KB)
            RAM (B)
            Price 5K
            Notes
            64
            32
            8,192
            $3.36
             
            64
            64
            16,384
            $2.59
             
            100
            64
            16,384
            $2.98
             
            64
            128
            32,768
            $4.02
             
            100
            128
            32,768
            $4.47
             
            64
            256
            65,536
            $4.12
             
            64
            512
            131,072
            $4.28
             
            64
            128
            32,768
            $2.91
             
            100
            128
            32,768
            $3.36
             
            64
            256
            65,536
            $3.65
             
            100
            256
            65,536
            $4.07
             
            100
            256
            65,536
            $4.55
             
            100
            512
            131,072
            $4.69
             
            64
            512
            131,072
            $4.47
             
            100
            512
            131,072
            $4.89
             

            RoHS Information

            Part Number
            Device Weight (g)
            Shipping Weight (grams)
            Lead Count
            Package Type
            Package Width
            Solder Composition
            JEDEC Indicator
            RoHS
            China EFUP
            PIC32MX470F512L-120/TL
            0.177500
            0.325000
            124
            VTLA
            9x9x0.9mm
            NiPdAu
            e4
            PIC32MX470F512L-I/TL
            0.177500
            0.325000
            124
            VTLA
            9x9x0.9mm
            NiPdAu
            e4
            PIC32MX470F512LT-120/TL
            0.177500
            0.331515
            124
            VTLA
            9x9x0.9mm
            NiPdAu
            e4
            PIC32MX470F512LT-I/TL
            0.177500
            0.331515
            124
            VTLA
            9x9x0.9mm
            NiPdAu
            e4
            PIC32MX470F512LT-V/TL
            0.177500
            0.331515
            124
            VTLA
            9x9x0.9mm
            NiPdAu
            e4
            PIC32MX470F512L-V/TL
            0.177500
            0.325000
            124
            VTLA
            9x9x0.9mm
            NiPdAu
            e4
            PIC32MX470F512L-120/PF
            0.497000
            2.333333
            100
            TQFP
            14x14x1mm
            Matte Tin
            e3
            PIC32MX470F512L-120/PT
            0.391000
            1.596639
            100
            TQFP
            12x12x1mm
            Matte Tin
            e3
            PIC32MX470F512L-I/PF
            0.497000
            2.333333
            100
            TQFP
            14x14x1mm
            Matte Tin
            e3
            PIC32MX470F512L-I/PT
            0.391000
            1.596639
            100
            TQFP
            12x12x1mm
            Matte Tin
            e3
            PIC32MX470F512LT-120/PF
            0.497000
            1.199000
            100
            TQFP
            14x14x1mm
            Matte Tin
            e3
            PIC32MX470F512LT-120/PT
            0.391000
            1.333333
            100
            TQFP
            12x12x1mm
            Matte Tin
            e3
            PIC32MX470F512LT-I/PF
            0.497000
            1.199000
            100
            TQFP
            14x14x1mm
            Matte Tin
            e3
            PIC32MX470F512LT-I/PT
            0.391000
            1.333333
            100
            TQFP
            12x12x1mm
            Matte Tin
            e3
            PIC32MX470F512LT-V/PF
            0.497000
            1.199000
            100
            TQFP
            14x14x1mm
            Matte Tin
            e3
            PIC32MX470F512LT-V/PT
            0.391000
            1.333333
            100
            TQFP
            12x12x1mm
            Matte Tin
            e3
            PIC32MX470F512L-V/PF
            0.497000
            2.333333
            100
            TQFP
            14x14x1mm
            Matte Tin
            e3
            PIC32MX470F512L-V/PT
            0.391000
            1.596639
            100
            TQFP
            12x12x1mm
            Matte Tin
            e3
            To see a complete listing of RoHS data for this device, please Click here
            Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.

            Buy from the Microchip Store

            Grid
            View
            Table
            View
            Filter:
            Apply
            Clear
            Only show products with samples
            Product
            Leads
            Package Type
            Temp Range
            Packing Media
            5K Pricing
            Buy