The CL88020 LED Driver Integrated Circuit (IC) is an off-line sequential linear LED driver designed to provide 8.5W of LED power from a 120 VAC nominal input voltage. CL88020 is designed to drive a long string of inexpensive, low-current LEDs directly from the AC mains. A basic driver circuit consists of Microchip Technology Inc.’s CL88020 LED driver IC, six resistors and a bridge rectifier. Two to four additional components are optional for various levels of transient protection, also with a low-cost NTC to assure remote over-temperature protection (OTP). No capacitors, EMI filters, or power factor correction circuits are needed unless the optional reduced light output ripple feature is desired.
Optimized for 120 VAC Nominal Input Voltage
120 VAC ± 15% input voltage
Targeted for 8.5W Output Power
Programmable Overtemperature Protection
Provides Gradual Reduction in Light Output with Increasing Temperature
Active Line Regulation
Provides Fairly Constant Output Power over Variations in AC Line Voltage
Typical Line Regulation of –12% to +0%
Four Taps with Two Current Set Resistors
Allows Optimization of THD
Optional Reduced Light Output Ripple
Provides Continuous Power to the LED
Uses an External Ceramic Storage Capacitor
TRIAC Dimmer Compatible
Available in a Thermally Enhanced 8-Lead SOIC Package with Heat Slug
Larger Creepage Distances between HighVoltage and Low Voltage Pins
The CL88020 LED Load Board is designed to work together with CL88020 LED Driver Board (ADM00766) and consist of 10 LEDs series and parallel connected and driven sequentially by 4 TAPS LED Linear Driver, CL88020 , from 120VAC mains.
Easily design your systems and drive long strings of inexpensive, low-current LEDs directly from the AC mains using Microchip’s off-line sequential linear LED driver – CL88020 - designed to provide 8.5W of LED power from a 120 VAC nominal input voltage.
The CL88020 120VAC off-line LED Driver Evaluation Board is a complete solution consisting of an LED Driver Board