Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

Serial Memory Single-Wire Evaluation Kit

Part Number: DM160232

Summary:

The Serial Memory Single-Wire Evaluation Kit (DM160232) is an easy-to-use interactive user tool to demonstrate the best in class features, functionality and low-power operation of the AT21CS Series Serial EEPROM devices. The evaluation kit is for engineers, developers and decision makers to allow for fast system prototyping using the Single-Wire Interface

View More

Thank you for your request. We will reply back with quotation as soon as possible! If you have any questions in the meantime, feel free to contact us here .

Documents and Software
Overview
Features
Additional Resources
Related Tools

Additional resources data currently not available.

Documents and Software

Product Features

     Supports Microchip’s Single-Wire Interface (SWI) protocol (AT21CS Series Serial EEPROMs)
    - Only two pins are needed to access the device (SI/O and GND)
    - Device family is self-powered via pull-up voltage on the SI/O signal


     Variable Socket VPUP Voltage
    - Internal variable voltage from 1.7V to 3.6V

     Includes SWI Graphical User Interface (GUI)
    - Supports Windows®7 or higher operating systems
    - Utilizes USB interface to communicate with user's PC

     Supports USB Base Board firmware update via the FLexible In-system Programming (FLIP) Software Utility
    - For more details on the software utility, refer to FLIP Software Utility

     Contains AT90USB1287, 8-bit AVR® Microcontroller
    - 128KB Flash, 64-pin, USB controller

Summary

The Serial Memory Single-Wire Evaluation Kit (DM160232) is an easy-to-use interactive user tool to demonstrate the best in class features, functionality and low-power operation of the AT21CS Series Serial EEPROM devices. The evaluation kit is for engineers, developers and decision makers to allow for fast system prototyping using the Single-Wire Interface (SWI) protocol. The Serial Memory Single-Wire Evaluation Kit includes a Graphical User Interface (GUI) which allows the user to configure, demonstrate and personalize the single-wire Serial EEPROM device.

 Supported Devices:

            Device Part Number             Protocol             Package Type             Voltage Range              Communication Speed

AT21CS01-STUM##-T

Single-Wire

3-lead SOT23

1.7V - 3.6V

15.4 or 125 kbps

Note: ## indicates one of eight slave address combinations. Please see the corresponding device data sheet for more information about these slave address combinations.

Package Contents

The Serial Memory Single-Wire Evaluation Kit includes the following:

  • SWI Socket Board (02-10681)
  • USB Base Board (02-10682)
  • Five AT21CS01-STUM10-T devices, with one installed in the SWI Socket Board's SOT23 socket
  • Important Information Sheet

System Requirements

    For the Serial Memory Single-Wire Evaluation Kit to function properly, the following hardware and software requirements must be met:

    • PC compatible system
    • An available USB port on PC
    • At least 1.8 MB of free disk space
    • Windows®7 or greater Operating Systems(1)
      • Note 1: Testing has been performed on a 64-bit Widows®7 operating system.