Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

MIC5252

150mA High-PSRR uCap LDO

Status: In Production

Features:

  • Input voltage range: 2.7V to 6.0V
  • PSRR equals 50dB at VO + 0.3V
  • Ultra-low output noise: 30µVrms
  • Stability with ceramic output capacitors
  • Ultra-low dropout: 135mV at 150mA
  • 1.0% initial accuracy
  • 2.0% over temperature
  • Low quiescent current: 90µA
  • Tight load and line regulation
  • TTL logic-controlled enable input
  • Zero off-mode current
  • Thermal shutdown and current limit protection
View More
Overview
Documents
Development Environment
RoHS Information
Buy Now

Device Overview

Summary

The MIC5252 is an efficient, precise CMOS voltage regulator optimized for ultra-low-noise applications. It offers 1% initial accuracy, extremely low dropout voltage (135mV at 150mA) and low ground current (typically 90µA). The MIC5252 provides a very low noise output, ideal for RF applications where a clean voltage source is required. The MIC5252 has a high PSRR even at low supply voltages, critical for battery-powered electronics. A noise bypass pin is also available for further reduction of output noise.

Designed specifically for handheld and battery-powered devices, the MIC5252 provides a TTL logic-compatible enable pin. When disabled, power consumption drops nearly to zero.

The MIC5252 also works with low-ESR ceramic capacitors, reducing the amount of board space necessary for power applications, critical in handheld wireless devices.

Key features include current limit, thermal shutdown, faster transient response, and an active clamp to speed up device turnoff. The MIC5252 is available in IttyBitty® SOT-23-5 package in a wide range of output voltages.

Additional Features
    • Input voltage range: 2.7V to 6.0V
    • PSRR equals 50dB at VO + 0.3V
    • Ultra-low output noise: 30µVrms
    • Stability with ceramic output capacitors
    • Ultra-low dropout: 135mV at 150mA
    • High output accuracy:
      • 1.0% initial accuracy
      • 2.0% over temperature
    • Low quiescent current: 90µA
    • Tight load and line regulation
    • TTL logic-controlled enable input
    • Zero off-mode current
    • Thermal shutdown and current limit protection
Parametrics
Name
Value
Product Type
Single LDOs
# of Out
1
IOUT #1
150
IOUT #2
n/a
IOUT #3
n/a
IOUT #4
n/a
IOUT (mA)
150
VIN Min (V)
2.7
VIN Max (V)
6
VOUT (V)
1.8, 2.5, 2.8, 2.85, 3.0, 4.75
Voltage Drop Typ (mV)
135
IGND Typ (µA)
90
Tol Typ %
±1
Noise (µV) rms
30
PSRR 1 kHz (dB)
60
Soft Start Pin
Load Dump
Rev Bat
Reverse Current Protect

Documents

Jump to:

Data Sheet

11/05/2015
642KB

Development tools data is currently unavailable.

RoHS Information

Part Number
Device Weight (g)
Shipping Weight (Kg)
Lead Count
Package Type
Package Width
Solder Composition
JEDEC Indicator
RoHS
China EFUP
MIC5252-4.75YM5-TR
0.017400
0.049000
5
SOT-23
-
NiPdAu
e4
MIC5252-1.5YM5-TR
0.017400
0.049000
5
SOT-23
-
NiPdAu
e4
MIC5252-1.8YM5-TR
0.017400
0.049000
5
SOT-23
-
NiPdAu
e4
MIC5252-2.5YM5-TR
0.017400
0.049000
5
SOT-23
-
NiPdAu
e4
MIC5252-2.85YM5-TR
0.017400
0.049000
5
SOT-23
-
NiPdAu
e4
MIC5252-2.8YM5-TR
0.017400
0.049000
5
SOT-23
-
NiPdAu
e4
MIC5252-3.0YM5-TR
0.017400
0.049000
5
SOT-23
-
NiPdAu
e4
MIC5252-2.85YML-TR
0.010100
0.662100
6
VDFN
2x2x0.9mm
NiPdAu
e4
MIC5252-2.8YML-TR
0.010100
0.662100
6
VDFN
2x2x0.9mm
NiPdAu
e4
MIC5252-1.5YML-TR
0.010100
0.662100
6
VDFN
2x2x0.9mm
NiPdAu
e4
MIC5252-3.0YML-TR
0.010100
0.662100
6
VDFN
2x2x0.9mm
NiPdAu
e4
To see a complete listing of RoHS data for this device, please Click here
Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.

Buy from the Microchip Store

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy