Microchip Technology Inc

dsPIC33EV256GM106

In Production

Microchip’s dsPIC33EV family of digital signal controllers (DSCs) features a 5V 70 MIPS dsPIC® DSC core with enhanced on-chip features and is ideal for operating in harsh environments such as appliances and automotive applications.The 5V dsPIC33EV family comes with rich peripheral integration which includes CAN, SENT, High Speed PWMs, OP Amps and Error Correcting Code Flash for increased reliability and safety. The dsPIC33EV family of devices enable the design of high-performance, precision motor control systems that are more energy efficient. They can be used to control BLDC, permanent magnet synchronous, AC induction and stepper motors. These devices are ideal for automotive applications and high-performance general  purpose applications. 

 

    Features

          Operating Conditions

          • 4.5V to 5.5V, -40ºC to +85ºC, DC to 70 MIPS
          • 4.5V to 5.5V, -40ºC to +125ºC, DC to 60 MIPS
          • 4.5V to 5.5V, -40ºC to +150ºC, DC to 40 MIPS

          dsPIC33E Core

          • Code-Efficient (C and Assembly) Architecture
          • Two 40-Bit Wide Accumulators
          • Single-Cycle (MAC/MPY) with Dual Data Fetch
          • Single-Cycle, Mixed-Sign MUL plus Hardware Divide
          • 32-Bit Multiply Support
          • Intermediate Security for Memory:
            • Provides a boot Flash segment in addition to the existing general Flash segment
          • Error Code Correction (ECC) for Flash
          • Added Two Alternate Register Sets for Fast Context Switching

          High-Speed PWM

          • Up to Six Pulse-Width Modulation (PWM) Outputs (three generators)
          • Primary Master Time Base Inputs allow Time Base Synchronization from Internal/External Sources
          • Dead Time for Rising and Falling Edges
          • 8.3 ns PWM Resolution at 60 MIPS,
          • 16.6 ns Center-Aligned mode at 60 MIPS
          • PWM Support for:
            • DC/DC, AC/DC, inverters, Power Factor Correction (PFC) and lighting
            • Brushless Direct Current (BLDC), Permanent Magnet Synchronous Motor (PMSM), AC Induction Motor (ACIM), Switched Reluctance Motor (SRM)
          • Programmable Fault inputs
          • Flexible trigger configurations for Analog-to-Digital conversion
          • Independent Time Base
          • Supports PWM lock, PWM output chopping and dynamic phase shifting

          Advanced Analog Features

          • ADC module:
            • Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H
            • Up to 36 analog inputs
            • Flexible and Independent ADC Trigger Sources
          • Up to Four Op Amp/Comparators with Direct Connection to the ADC module:
          • Additional dedicated comparator and 7-bit Digital-to-Analog Converter (DAC)
          • Programmable references with 128 voltage points
          • Programmable blanking and filtering
          • Charge Time Measurement Unit (CTMU):
            • Supports mTouch™ capacitive touch sensing
            • Provides high-resolution time measurement (1 ns)
            • On-chip temperature measurement
            • Temperature sensor diode
            • Multiple sources of edge input triggers

          Timers/Output Compare/Input Capture

          • Nine General Purpose Timers:
            • Five 16-bit and up to two 32-bit timers/counters, Timer3 can provide ADC trigger
            • Four Output Capture modules configurable as timers/counters
          • Four Input Capture modules

          Communication Interfaces

          • Two Enhanced Addressable UART modules (6.25 Mbps):
            • Support for LIN/J2602 bus support and IrDA®
            • High and low speed (SCI)
          • Two SPI modules (15 Mbps):
            • 25 Mbps data rate without PPS used
          • One I2C™ module (up to 1 Mbaud) with SMBus Support
          • Two SENT J2716 (Single Edge Nibble Transmission-Transmit/Receive) module for Automotive Applications
          • One CAN module:
            • 32 buffers, 16 filters and three masks

          Direct Memory Access (DMA)

          • 4-Channel DMA with User-Selectable Priority Arbitration
          • Universal Asynchronous Receiver/Transmitter (UART), Serial Peripheral Interface (SPI), ADC, Input Capture, Output Compare and Controller Area Network (CAN)

          Qualification and Class B Support

          • AEC-Q100 Rev G (Grade 1: -40ºC to +125ºC)
          • AEC-Q100 Rev G (Grade 0: -40ºC to +150ºC)
          • Class B Safety Library, IEC 60730

          Class B Fault Handling Support

          • Backup FRC
          • Windowed WDT uses LPRC
          • Windowed Deadman Timer uses System Clock (System Windowed Watchdog Timer)
          • H/W Clock Monitor Circuit
          • Oscillator Frequency Monitoring through CTMU
          • Dedicated PWM Fault Pin
          • Lockable Clock Configuration
    Parameter Name
    Value
    Architecture
    16-bit
    CPU Speed (MIPS)
    70
    Memory Type
    Flash
    Program Memory (KB)
    256
    ECC Program Flash (Error Correction Code)
    Yes
    RAM (KB)
    16
    Temperature Range C
    -40 to 150
    Operating Voltage Range (V)
    4.5 to 5.5
    I/O Pins
    53
    Pin Count
    64
    System Management Features
    BOR
    POR
    Yes
    WDT
    Yes
    Internal Oscillator
    7.37 MHz, 32 kHz
    Digital Communication Peripherals
    2-UART
    2-SPI
    1-I2C
    Analog Peripherals
    1-A/D 36x12-bit @ 1100(ksps) 1-D/A 1x7-bit
    Op Amp
    4
    Comparators
    5
    CAN (#, type)
    1 CAN
    Capture/Compare/PWM Peripherals
    4/4
    PWM Resolution bits
    16
    Motor Control PWM Channels
    6
    Timers
    5 x 16-bit 2 x 32-bit
    DMA
    4
    Supported in MPLAB Code Configurator
    Yes
    Documentation
    Data Sheets
    09/26/2016
    4333KB
      Errata
     
     
     
     
    Errata
    09/06/2017
    352KB
      Migration Documents
     
     
     
     
    Migration Documents
    10/03/2013
    574KB
      Programming Specifications
     
     
     
    Programming Specification
    02/25/2013
    10777KB
    Programming Specification
    01/21/2016
    443KB
      Application Notes
     
     
     
    AppNote
    04/04/2010
    474KB
    AppNote
    06/30/2011
    440KB
      Brochures
     
     
     
    Brochures
    05/25/2017
    4130KB
    Brochures
    06/27/2017
    6780KB
      Sell Sheets
     
     
     
     
    Sell Sheets
    07/11/2011
    182KB
      Reference Manual
     
     
     
    Reference Manual
    11/17/2014
    155KB
    Reference Manual
    05/04/2016
    304KB
    Reference Manual
    11/17/2014
    140KB
    Reference Manual
    11/13/2013
    106KB
    Reference Manual
    03/18/2014
    668KB
    Reference Manual
    07/10/2015
    351KB
    Reference Manual
    03/13/2014
    363KB
    Reference Manual
    05/28/2014
    281KB
    Reference Manual
    11/17/2014
    250KB
    Reference Manual
    03/14/2014
    467KB
    Reference Manual
    11/13/2013
    1082KB
    Reference Manual
    11/13/2013
    497KB
    Reference Manual
    11/13/2013
    570KB
    Reference Manual
    11/13/2013
    1100KB
    Reference Manual
    11/13/2013
    1102KB
    Reference Manual
    11/13/2013
    478KB
    Reference Manual
    11/13/2013
    1519KB
    Reference Manual
    11/13/2013
    309KB
    Reference Manual
    11/13/2013
    306KB
    Reference Manual
    11/13/2013
    120KB
    Reference Manual
    11/13/2013
    278KB
    Reference Manual
    11/13/2013
    301KB
    Reference Manual
    11/18/2014
    272KB
    Reference Manual
    11/13/2013
    213KB
    Reference Manual
    11/13/2013
    204KB
    Reference Manual
    11/13/2013
    508KB
    Reference Manual
    11/13/2013
    451KB
      Software
     
     
     
     
    Software
    12/08/2014
    3KB
      Code Examples
     
     
     
     
    Code Examples
    05/11/2015
    73KB
    Code Examples
    05/11/2015
    57KB
    Code Examples
    05/11/2015
    59KB
      Software Library
     
     
     
     
    Software Library
    07/15/2014
    17KB
      ApplicationNote Literature
     
     
     
     
    AppNoteLiterature
    02/09/2015
    5221KB
      User Guides
     
     
     
     
    User Guides
    11/17/2014
    1278KB
    Pricing & Samples
    All pricing shown in USD only.
    Part Number
    Leads
    Package Type
    Temp Range
    Packing
    1+
    26+
    100+
    1000+
    5000+
    Buy
    Sample
    DSPIC33EV256GM106-E/MR
    64
    QFN
    -40C to +125C
    TUBE
    4.67
    4.28
    3.88
    3.57
    3.40
     
    DSPIC33EV256GM106-E/PT
    64
    TQFP
    -40C to +125C
    TRAY
    4.56
    4.18
    3.78
    3.48
    3.31
     
    DSPIC33EV256GM106-H/MR
    64
    QFN
    -40C to +150C
    TUBE
    5.58
    5.12
    4.64
    4.27
    4.06
     
    DSPIC33EV256GM106-H/PT
    64
    TQFP
    -40C to +150C
    TRAY
    5.47
    5.01
    4.54
    4.18
    3.97
     
    DSPIC33EV256GM106-I/MR
    64
    QFN
    -40C to +85C
    TUBE
    4.26
    3.91
    3.54
    3.25
    3.09
    DSPIC33EV256GM106-I/PT
    64
    TQFP
    -40C to +85C
    TRAY
    4.14
    3.80
    3.44
    3.16
    3.01
    DSPIC33EV256GM106T-I/MR
    64
    QFN
    -40C to +85C
    T/R
    4.28
    3.92
    3.55
    3.27
    3.11
     
    DSPIC33EV256GM106T-I/PT
    64
    TQFP
    -40C to +85C
    T/R
    4.16
    3.82
    3.46
    3.18
    3.02
     

    ** Device not available to purchase online. Please contact a sales office for pricing information.
    Open a microchipDIRECT account today!

    Development Tools
    • Demo & Eval Boards
    • Emulation & Debuggers
    • Programmers
    • dsPIC33EV 5V CAN-LIN Starter Kit ( DM330018 )

      dsPIC33EV

      The dsPIC33EV 5V CAN-LIN starter Kit features the dsPIC33EV256GM106 Digital Signal Controller (DSC) for automotive and motor control applications. The Starter Kit contains serial data ports for CAN, LIN and SENT, a self-contained USB programming/debug interface, and an expansion footprint for flexibility in application hardware development. This board allows users to...

    • dsPIC33EV256GM106 5V PIM for Motor Control Signal Board ( MA330036 )

      dsPIC33EV256GM106

      The dsPIC33EV256GM106 5V motor control plug in module (PIM) comes with a 64-pin dsPIC33EV256GM106 TQFP device and enables users to explore the innovative features of the 70MIPS, 5V dsPIC33EV using both internal and external op amps with the Low Voltage Motor Control Development Board, (DV330100), by using its 105-pin interface.

    • Low Voltage Motor Control Development Bundle ( DV330100 )

      Low

      The Low Voltage Motor Control Development Bundle provides a cost-effective method of evaluating and developing dual/single motor control power stage targeted to drive two Brushless DC (BLDC) motors or Permanent Magnet Synchronous Motors (PMSM) concurrently. The bundle comes with a dsPIC DSC Signal board, Motor Control 10-24V Driver Board and dsPIC33EP512GM710 Dual Motor Control PIM.

    • MPLAB ICD 4 In-Circuit Debugger ( DV164045 )

      MPLAB

      The MPLAB® ICD 4 In-Circuit Debugger/Programmer is Microchip’s fastest, cost-effective debugging and programming tool for PIC® Microcontrollers (MCUs) and dsPIC® Digital Signal Controllers (DSCs). This speed is provided by a 300 MHz, 32-bit MCU with 2MB of RAM and a high-speed FPGA to yield faster communications, downloads and debugging. It...

    • PICkit 3 In-Circuit Debugger ( PG164130 )

      PICkit

      Microchip’s PICkit™ 3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. In-circuit debugging offers these benefits:

      • Low cost
      • Minimum of additional hardware needed for debug
      • Expensive sockets or adapters are not required...

      Debug Features:
      Stop watch:True
      Pgm-memory HW breakpoints:3
      Data-memory breakpoints:3
      Simple HW breakpoints:5
      WDT overflow:True
      Pass counter:True

    • MPLAB ICD 3 In-Circuit Debugger ( DV164035 )

      MPLAB

      MPLAB® ICD 3 In-Circuit Debugger System is Microchip's most cost effective high-speed hardware debugger/programmer for Microchip Flash Digital Signal Controller (DSC) and microcontroller (MCU) devices. It debugs and programs PIC® Flash microcontrollers and dsPIC® DSCs with the powerful, yet easy-to-use graphical user interface of MPLAB Integrated Development Environment (IDE).

      Debug Features:
      WDT overflow:True
      Data-memory breakpoints:3
      Pgm-memory SW breakpoints:Unlimited
      Simple HW breakpoints:5
      Pass counter:True
      Advanced breakpoints:True
      Stop watch:True
      Pgm-memory HW breakpoints:3

    • MPLAB REAL ICE PROBE KIT ( DV244005 )

      MPLAB

      MPLAB REAL ICE In-Circuit Emulator System is Microchip’s next generation high speed emulator for Microchip Flash DSC® and MCU devices. It debugs and programs PIC® and dsPIC® Flash microcontrollers with the easy-to-use but powerful graphical user interface of the MPLAB Integrated Development Environment (IDE), included with each kit.
      The MPLAB REAL ICE probe is connected...

      Debug Features:
      Pgm-memory HW breakpoints:3
      Native Trace:True
      Advanced breakpoints:True
      Runtime watch:Supported
      WDT overflow:True
      Stop watch:True
      Simple HW breakpoints:5
      Data-memory breakpoints:3
      Data capture:Enabled
      Pgm-memory SW breakpoints:Unlimited
      Pass counter:True

    • MPLAB ICD 4 In-Circuit Debugger ( DV164045 )

      MPLAB

      The MPLAB® ICD 4 In-Circuit Debugger/Programmer is Microchip’s fastest, cost-effective debugging and programming tool for PIC® Microcontrollers (MCUs) and dsPIC® Digital Signal Controllers (DSCs). This speed is provided by a 300 MHz, 32-bit MCU with 2MB of RAM and a high-speed FPGA to yield faster communications, downloads and debugging. It...

    • PICkit 3 In-Circuit Debugger ( PG164130 )

      PICkit

      Microchip’s PICkit™ 3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. In-circuit debugging offers these benefits:

      • Low cost
      • Minimum of additional hardware needed for debug
      • Expensive sockets or adapters are not required...

    • MPLAB PM3 Universal Device Programmer ( DV007004 )

      MPLAB

      The MPLAB® PM3 Universal Device Programmer is easy to use and operates with a PC or as a stand-alone unit, and programs Microchip's entire line of PIC® devices as well as the latest dsPIC® DSC devices. When used standalone, data can be loaded and saved with the SD/MMC card (not included).

      • Socket: AC164327   PartNo: DSPIC33EV256GM106 (64PT)
      • Socket: AC164343   PartNo: DSPIC33EV256GM106 (64MR)
    • MPLAB ICD 3 In-Circuit Debugger ( DV164035 )

      MPLAB

      MPLAB® ICD 3 In-Circuit Debugger System is Microchip's most cost effective high-speed hardware debugger/programmer for Microchip Flash Digital Signal Controller (DSC) and microcontroller (MCU) devices. It debugs and programs PIC® Flash microcontrollers and dsPIC® DSCs with the powerful, yet easy-to-use graphical user interface of MPLAB Integrated Development Environment (IDE).

    • MPLAB REAL ICE PROBE KIT ( DV244005 )

      MPLAB

      MPLAB REAL ICE In-Circuit Emulator System is Microchip’s next generation high speed emulator for Microchip Flash DSC® and MCU devices. It debugs and programs PIC® and dsPIC® Flash microcontrollers with the easy-to-use but powerful graphical user interface of the MPLAB Integrated Development Environment (IDE), included with each kit.
      The MPLAB REAL ICE probe is connected...

    Similar Devices
    Product
    Pins
    Flash
    RAM
    Price5K
    Notes
    28
    128
    8,192
    $2.07
    SENT, HS-PWM, 5V
    44
    128
    8,192
    $2.31
    SENT, HS-PWM, 5V
    64
    128
    8,192
    $2.52
    SENT, HS-PWM, 5V
    28
    128
    8,192
    $2.28
    CAN, SENT, HS-PWM, 5V
    44
    128
    8,192
    $2.52
    CAN, SENT, HS-PWM, 5V
    64
    128
    8,192
    $2.73
    CAN, SENT, HS-PWM, 5V
    28
    256
    16,384
    $2.35
    SENT, HS-PWM, 5V
    44
    256
    16,384
    $2.59
    SENT, HS-PWM, 5V
    64
    256
    16,384
    $2.80
    SENT, HS-PWM, 5V
    28
    256
    16,384
    $2.56
    CAN, SENT, HS-PWM, 5V
    44
    256
    16,384
    $2.80
    CAN, SENT, HS-PWM, 5V
    64
    256
    16,384
    $3.01
    CAN, SENT, HS-PWM, 5V
    28
    32
    4,096
    $1.79
    SENT, HS-PWM, 5V
    44
    32
    4,096
    $2.03
    SENT, HS-PWM, 5V
    64
    32
    4,096
    $2.24
    SENT, HS-PWM, 5V
    28
    32
    4,096
    $2.00
    CAN, SENT, HS-PWM, 5V
    44
    32
    4,096
    $2.24
    CAN, SENT, HS-PWM, 5V
    64
    32
    4,096
    $2.45
    CAN, SENT, HS-PWM, 5V
    28
    64
    4,096
    $1.93
    SENT, HS-PWM, 5V
    44
    64
    8,192
    $2.17
    SENT, HS-PWM, 5V
    64
    64
    8,192
    $2.38
    SENT, HS-PWM, 5V
    28
    64
    8,192
    $2.14
    CAN, SENT, HS-PWM, 5V
    44
    64
    8,192
    $2.38
    CAN, SENT, HS-PWM, 5V
    64
    64
    8,192
    $2.59
    CAN, SENT, HS-PWM, 5V
    RoHS Information
    Part
    Number
    Device
    Weight
    Shipping
    Weight
    Lead
    Count
    Package
    Type
    Package
    Width
    Solder
    Composition
    JEDEC
    Indicator
    RoHS
     
    China
    EFUP
    DSPIC33EV256GM106T-I/PT
    0.286700
    0.738333
    64
    TQFP
    10x10x1mm
    Matte Tin
    e3
    DSPIC33EV256GM106-H/PT
    0.286700
    2.487500
    64
    TQFP
    10x10x1mm
    Matte Tin
    e3
    DSPIC33EV256GM106T-I/PTVAO
    0.286700
    0.738333
    64
    TQFP
    10x10x1mm
    Matte Tin
    e3
    DSPIC33EV256GM106-I/PT
    0.286700
    2.487500
    64
    TQFP
    10x10x1mm
    Matte Tin
    e3
    DSPIC33EV256GM106-E/PT
    0.286700
    2.487500
    64
    TQFP
    10x10x1mm
    Matte Tin
    e3
    DSPIC33EV256GM106-I/MR
    0.232400
    0.350000
    64
    QFN
    9x9x0.9mm
    Matte Tin
    e3
    DSPIC33EV256GM106T-I/MR
    0.232400
    0.370303
    64
    QFN
    9x9x0.9mm
    Matte Tin
    e3
    DSPIC33EV256GM106-E/MR
    0.232400
    0.350000
    64
    QFN
    9x9x0.9mm
    Matte Tin
    e3
    DSPIC33EV256GM106-H/MR
    0.232400
    0.350000
    64
    QFN
    9x9x0.9mm
    Matte Tin
    e3
    To see a complete listing of RoHS data for this device, please Click here
    Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.