In this video we describe the basics of operating the Integrated Programming and Calibration Environment (IPCE) software. This IPCE software along with the LXM9518 programmer are tools that allow you to customize, program, and optimize the inductive positions sensor ICs by Microchip. Below are the links to the IPCE software and the Inductive Position Sensor product pages. 1. You can download the IPCE software from our Getting Started with Inductive Sensors design page. https://www.microchip.com/en-us/products/sensors-and-motor-drive/inductive-position-sensors/getting-started-with-inductive-position-sensors 2. LXM9518 Programmer product page for use with the IPCE software. https://www.microchip.com/Developmenttools/ProductDetails/LXM9518 3. LX3302A product Page: Inductive Position Sensor IC with a max 150 degC operating temperature and analog, PWM, SENT and PSI5 outputs https://www.microchip.com/wwwproducts/en/LX3302A 4. LX3301A Product Page: Inductive Position Sensor IC with a Max 125 degC operating temperature and Analog and PWM outputs. https://www.microchip.com/wwwproducts/en/LX3301A 5. Inductive Position Sensor Overview Page. https://www.microchip.com/en-us/products/sensors-and-motor-drive/inductive-position-sensors