Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

UCS1002-1

Programmable USB Port Power Controller with Charger Emulation

Status: In Production

Features:

  • 2.9 V to 5.5 V source voltage range
  • Up to 2.5 A current with 55 mΩ On Resistance
  • Over-current trip or constant current limiting
  • Soft turn-on circuitry
  • Programmable current limit
  • Dynamic thermal management
  • Under- and over-voltage lockout
  • Back-drive, back-voltage protection
  • Latch or auto-recovery (low test current) fault handling
  • Selectable active high or low power switch enable
  • BC1.2 VBUS discharge port renegotiation function
  • USB-IF BC1.2 charging downstream port (CDP) and dedicated charging port (DCP) modes, YD/T-1591, and most Apple® and RIM® protocols standard; others as defined via the SMBus 2.0/I2C®
  • USB 2.0 compliant high-speed data switch (in Passthrough and CDP modes)
  • Nine preloaded charger emulation profiles for maximum compatibility coverage of peripheral devices
  • One custom programmable charger profile for portable device support for fully host controlled charger emulation
  • Self-contained current monitoring and charge rationing for power allocation applications
  • Automatic shutdown when Battery Full option
  • Low power Attach Detection and open-drain A_DET# pin
  • Ultra low power Sleep state
  • Optional split supply support for VBUS and VDD for low power in system standby states
  • Wake on Attach USB
  • Supports Block Write and Read
  • Multiple SMBus addresses
  • Wide operating temperature range: -40°C to +85°C
  • IEC61000-4-2 8 / 15 kV ESD immunity
  • UL recognized and EN/IEC 60950-1 (CB) Certified
  • Notebook and Netbook Computers
  • Tablets and E-book Readers
  • Desktops and Monitors
  • Docking Stations and Printers
  • AC-DC wall adapters
View More
Overview
Documents
Development Environment
Similar Devices
RoHS Information
Buy Now

Device Overview

Summary

The UCS1002-1 provides a USB port power switch for precise control of up to 2.5 amperes continuous current with over-current limit (OCL), dynamic thermal management, latch or auto-recovery (low test current) fault handling, selectable active low or high enable, under- and over-voltage lockout, back-drive protection, and back-voltage
protection.

Split supply support for VS and VDD is an option for low power in system standby states. This gives battery operated applications, like automotive charging ports, the ability to detect attachments from a sleep or off state. After the Attach Detect is flagged, the system can decide to wake up and/or provide charging. 

In addition to power switching and current limiting modes, the UCS1002-1 will automatically charge a wide variety of portable devices, including USB-IF BC1.2, YD/T-1591 (2009), most Apple® and RIM®, and many others. Nine preloaded charger emulation profiles maximize compatibility coverage of peripheral devices. As well, a customizable charger emulation profile is available to accommodate unique existing and future portable device handshaking/signature requirements.

The UCS1002-1 also provides current monitoring to allow intelligent management of system power and charge rationing for controlled delivery of current regardless of the host power state. This is especially important for battery operated applications that want to provide power in a standby and/or off state but do not want to drain the battery
excessively.

The UCS1002-1 is available in a 20-pin QFN 4 mm x 4 mm package.

Additional Features

    Highlights

    • Port power switch with two current limit behaviors
      • 2.9 V to 5.5 V source voltage range
      • Up to 2.5 A current with 55 mΩ On Resistance
      • Over-current trip or constant current limiting
      • Soft turn-on circuitry
      • Programmable current limit
      • Dynamic thermal management
      • Under- and over-voltage lockout
      • Back-drive, back-voltage protection
      • Latch or auto-recovery (low test current) fault handling
      • Selectable active high or low power switch enable
      • BC1.2 VBUS discharge port renegotiation function
    • Selectable/automatic cycling of USB data line charger emulation profiles
      • USB-IF BC1.2 charging downstream port (CDP) and dedicated charging port (DCP) modes, YD/T-1591, and most Apple® and RIM® protocols standard; others as defined via the SMBus 2.0/I2
      • USB 2.0 compliant high-speed data switch (in Passthrough and CDP modes)
      • Nine preloaded charger emulation profiles for maximum compatibility coverage of peripheral devices
      • One custom programmable charger profile for portable device support for fully host controlled charger emulation
    • Self-contained current monitoring and charge rationing for power allocation applications
    • Automatic shutdown when Battery Full option
    • Low power Attach Detection and open-drain A_DET# pin
    • Ultra low power Sleep state
    • Optional split supply support for VBUS and VDD for low power in system standby states
    • Wake on Attach USB
    • SMBus 2.0/I2C communications
      • Supports Block Write and Read
      • Multiple SMBus addresses
    • Wide operating temperature range: -40°C to +85°C
    • IEC61000-4-2 8 / 15 kV ESD immunity
    • UL recognized and EN/IEC 60950-1 (CB) Certified

    Target Applications

    • Notebook and Netbook Computers
    • Tablets and E-book Readers
    • Desktops and Monitors
    • Docking Stations and Printers
    • AC-DC wall adapters
Parametrics
Name
Value
Description
Programmable USB Port Power Controller with Charger Emulation
Hi-Speed USB 2.0 Switch
1
USB Port Power Switch
1
Battery Charger Emulation Profiles
10
8 Resistor Set Current Limits
Up to 2.5A
Power Allocation
yes
Attach Detection Output
yes
Interface
I2C /SMBus
Current Measurement
yes

Documents

Jump to:

Data Sheet

08/15/2013
1163KB

Gerber Files

Software

Development Environment

  • Demo & Evaluation Boards
Demo & Evaluation Boards
UCS1002 Programmable USB Port Power Controller
UCS1002 Programmable USB Port Power Controller ( ADM00497 )

The UCS1002 Evaluation Board allows the user to use a graphical user interface to demonstrate the Highest Current Algorithm, apply charger emulation profiles, and set up for full BC1.2 CDP, DCP, and SDP modes. Options in the GUI include custom profile register configuration, dead battery routines, charge ration operation, and configuration of fault handling.

Devices Supported:...

Learn More
Add To Cart

Similar Devices

Product
Battery Charger Emulation Profiles
Charging Indicator Output
Attach Detection Output
Price 5K
9
yes
 
$0.90
9
 
yes
$0.90
9
yes
 
$0.90
9
 
yes
$0.90
10
 
yes
$1.29
10
 
yes
$1.29
10
yes
yes
 
10
yes
yes
$1.29
10
 
yes
$1.40
10
 
yes
$2.02
10
 
yes
$1.72

RoHS Information

Part Number
Device Weight (g)
Shipping Weight (Kg)
Lead Count
Package Type
Package Width
Solder Composition
JEDEC Indicator
RoHS
China EFUP
UCS1002-1-BP
0.043100
0.632653
20
QFN
4x4x0.9mm
Matte Tin
e3
UCS1002-1-BP-TR
0.043100
0.212121
20
QFN
4x4x0.9mm
Matte Tin
e3
To see a complete listing of RoHS data for this device, please Click here
Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.

Buy from the Microchip Store

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy