Status: In Production
The TC1107 is a fixed output, high accuracy (typically ±0.5%) CMOS upgrade for older (bipolar) low dropout regulators. Total supply current is typically 50µA at full load (20 to 60 times lower than in bipolar regulators). TC1107 key features include ultra low noise operation (plus optional Bypass input); very low dropout voltage (typically 240 mV at full load), and fast response to step changes in load. Supply current is reduced to 0.05 µA (typical) and VOUT falls to zero when the shutdown input is low. The TC1107 incorporates both over-temperature and over-current protection. The TC1107 is stable with an output capacitor of only 1µF and has a maximum output current of 300 mA.
This is a blank PCB that allows the operation of Microchip Technology’s 8-pin devices to be easily evaluated. Each device pin is connected to a pull-up resistor, a pull-down resistor, an in-line resistor, and a loading capacitor. The PCB pads allow through hole or surface mount connectors to be installed to ease connection to the board. Additional passive component footprints are on the...
For pricing and availability, contact Microchip Local Sales.