Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

SY10E116

Status: Not Recommended for new designs

Features:

  • 450psmax Propagation Delay
  • Extended 100E VEE range of -4.2V to -5.5V
  • VBB output for single-ended reception
  • Fully compatible with industry standard 10KH, 100K I/O levels
  • Internal 75KΩ input pulldown resistors
  • Fully compatible with Motorola MC10E/100E116
  • Available in 28-pin PLCC package
View More
Overview
Documents
Development Environment
RoHS Information
Add To Cart

Device Overview

Summary

The SY10/100E116 are quint differential line receivers designed for use in new, high-performance ECL systems.These devices have emitter-follower outputs and an internally generated reference supply (VBB) for singleended reception.Active current sources combined with Micrel's ASSET™ technology provide the receivers with excellent common mode noise rejection.The receiver design features clamp circuitry to cause a defined output state if both the inverting and non-inverting inputs are left open; in this case the Q output goes LOW, while the Q output goes HIGH.If both inverting and non-inverting inputs are at equal potential, the receiver does not go to a defined state, but rather shares current in normal differential amplifier fashion, producing output voltage levels midway between HIGH and LOW.The VBB output is intended for use as a reference voltage for single-ended reception of ECL signals to that device only. When using VBB for this purpose, it is recommended that VBB is decoupled to VCC via a 0.01µF capacitor.For higher bandwidth, please refer to the SY10/100E416 device.

Additional Features
    • 450psmax Propagation Delay
    • Extended 100E VEE range of -4.2V to -5.5V
    • VBB output for single-ended reception
    • Fully compatible with industry standard 10KH, 100K I/O levels
    • Internal 75KΩ input pulldown resistors
    • Fully compatible with Motorola MC10E/100E116
    • Available in 28-pin PLCC package
Parametrics
Name
Value
Product Type
Fanout & Buffer and Drivers
Input
LVPECL/LVDS
Supply Voltage
5V
Max Freq (GHz)
1
Icc (mA)
175
OE
True
RPE
False
FSI
False
Input Mux
True
Input EQ
False
Output Type
LVDS
Output Voltage
3.3V

Documents

Jump to:

Development tools data is currently unavailable.


Rohs data is currently unavailable.

Buy from Microchip

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy