Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

SST25WF010

Status: End of Life

Features:

  • Single Voltage Read and Write Operations– 1.65-1.95V
  • Serial Interface Architecture– SPI Compatible: Mode 0 and Mode 3
  • High Speed Clock Frequency– 40MHz
  • Superior Reliability– Endurance: 100,000 Cycles– Greater than 100 years Data Retention
  • Ultra-Low Power Consumption:– Active Read Current: 2 mA (typical @ 20MHz)– Standby Current: 2 µA (typical)
  • Flexible Erase Capability– Uniform 4 KByte sectors– Uniform 32 KByte overlay blocks
  • Fast Erase and Byte-Program:– Chip-Erase Time: 125 ms (typical)– Sector-/Block-Erase Time: 62ms (typical)– Byte-Program Time: 50 µS (typical)
  • Auto Address Increment (AAI) Programming– Decrease total chip programming time overByte-Program operations
  • End-of-Write Detection– Software polling the BUSY bit in Status Register– Busy Status readout on SO pin
  • Reset Pin (RST#) or Programmable Hold Pin(HOLD#) option– Hardware Reset pin as default– Hold pin option to suspend a serial sequencewithout deselecting the device
  • Write Protection (WP#)– Enables/Disables the Lock-Down function of thestatus register
  • Software Write Protection– Write protection through Block-Protection bits instatus register
  • Temperature Range– Industrial: -40°C to +85°C
  • Packages Available– 8-lead SOIC (150 mils)– 8-contact WSON (5mm x 6mm)
  • All non-Pb (lead-free) devices are RoHS compliant
View More
Overview
Documents
Development Environment
Similar Devices
RoHS Information
Add To Cart

Device Overview

Summary

SST25WF010 SPI serial flash memory is manufactured with SST proprietary, highperformance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.

The SST25WF020 End of Life notification is available on-line EOL NOTIFICATION

Please consider this device SST25WF020A

Additional Features
    • Single Voltage Read and Write Operations– 1.65-1.95V
    • Serial Interface Architecture– SPI Compatible: Mode 0 and Mode 3
    • High Speed Clock Frequency– 40MHz
    • Superior Reliability– Endurance: 100,000 Cycles– Greater than 100 years Data Retention
    • Ultra-Low Power Consumption:– Active Read Current: 2 mA (typical @ 20MHz)– Standby Current: 2 µA (typical)
    • Flexible Erase Capability– Uniform 4 KByte sectors– Uniform 32 KByte overlay blocks
    • Fast Erase and Byte-Program:– Chip-Erase Time: 125 ms (typical)– Sector-/Block-Erase Time: 62ms (typical)– Byte-Program Time: 50 µS (typical)
    • Auto Address Increment (AAI) Programming– Decrease total chip programming time overByte-Program operations
    • End-of-Write Detection– Software polling the BUSY bit in Status Register– Busy Status readout on SO pin
    • Reset Pin (RST#) or Programmable Hold Pin(HOLD#) option– Hardware Reset pin as default– Hold pin option to suspend a serial sequencewithout deselecting the device
    • Write Protection (WP#)– Enables/Disables the Lock-Down function of thestatus register
    • Software Write Protection– Write protection through Block-Protection bits instatus register
    • Temperature Range– Industrial: -40°C to +85°C
    • Packages Available– 8-lead SOIC (150 mils)– 8-contact WSON (5mm x 6mm)
    • All non-Pb (lead-free) devices are RoHS compliant
Parametrics
Name
Value
Density
1 Mbit
Op. Volt Range (V)
1.65 to 1.95
Max. Clock Freq.
40 MHz
Temp Range (°C)
-40°C to +85°C
Endurance
100,000

Documents

Jump to:

MISC

  
31KB

Development Environment

  • Code Examples

Similar Devices

Product
Memory Size
Memory Speed
Package
Price 5K
1024K
33 MHz
CSP-8, SOIC-8, TDFN-S-8
$0.47

Rohs data is currently unavailable.

Buy from Microchip

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy