Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

RN-T7-TAG

Status: End of Life

Features:

  • •Based on the ultra-low power RN171 module (4 µA sleep) •Can wake and send RSSI UDP packets in 100 ms •Configurable transmit power 0 to +12 dBm •Full 802.11b/g Wi-Fi transmit and receive functions •Built-in three-axis motion sensor and contact closure Reed relay switch •Built in thermistor for temperature sensing •Three general-purpose pushbuttons •On-board sensor eliminates the need for an external microprocessor •Two bi-color LEDs to indicate status •Powered with a CR-123 replaceable battery •Contains a built-in battery boost circuit •Waterproof/dustproof ABS polycarbonate housing (IP67 casing) with slots for straps allowing the tag to be connected to personnel and equipment •Works with the Cisco CCX engine; can perform a Cisco CCX blink in 15 ms
View More
Overview
Documents
Development Environment
RoHS Information
Add To Cart

Device Overview

Summary

IMPORTANT NOTICE: This product is available as a reference design. All documentation and specifications are available so you can build your own tag.

The RN-T7-TAG is a small, battery-powered wireless device that uses a standard 802.11 b/g Wi-Fi network to track assets using customer-developed or third-party location engines. Based on the ultra-low power RN171 Wi-Fi module (built with silicon specifically designed for asset tracking type applications), the tag consumes very little power - waking up from 4µA deep sleep, drawing only 35 mA (on average) while awake and connected over Wi-Fi, sending data and going back to sleep in only 100ms – giving it multi-year battery life. Custom WebScan firmware running on the module adds RTLS capability and is designed specifically to address the key requirements in asset tracking implementations, cost and simplicity. The tag’s low-power hardware and specialized WebScan firmware coupled with a range of sensors such as motion sensor, on-board temperature sensor, pushbuttons, and a Reed switch make the RN-T7-TAG ideal for building RTLS systems or as a reference design.

Additional Features
  • Based on the ultra-low power RN171 module (4 µA sleep)
  • Can wake and send RSSI UDP packets in 100 ms
  • Configurable transmit power 0 to +12 dBm
  • Full 802.11b/g Wi-Fi transmit and receive functions
  • Built-in three-axis motion sensor and contact closure Reed relay switch
  • Built in thermistor for temperature sensing
  • Three general-purpose pushbuttons
  • On-board sensor eliminates the need for an external microprocessor
  • Two bi-color LEDs to indicate status
  • Powered with a CR-123 replaceable battery
  • Contains a built-in battery boost circuit
  • Waterproof/dustproof ABS polycarbonate housing (IP67 casing) with slots for straps allowing the tag to be connected to personnel and equipment
  • Works with the Cisco CCX engine; can perform a Cisco CCX blink in 15 ms
Parametrics
Name
Value
Type
EOL - Delete
Output Power (dBm)
12.00
Operating Temperature Range
-40 to 85
Frequency Range
2.405-2.48
Input Sensitivity (mVpp)
-83.00
RSSI
Yes
TX Current Consumption
180.00
RX Current Consumption
35.00
Sleep Mode Current Consumption
Yes
MAC
Yes

Documents

Jump to:

Supporting Collateral

Certifications

User Guides


Development tools data is currently unavailable.


Rohs data is currently unavailable.

Buy from Microchip

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy