Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

MIC23650

6A Buck Regulator with HyperLight Load® & I2C

Status: In Production

Features:

  • 6A (Pulsed) Output Current
  • Reduced Component Count (No Feedback Resistors)
  • High Efficiency (up to 95%)
  • Constant-ON-Time Control with High Switching Frequency:
  • Three-State pins (nine voltage options)
  • 0.6V, 0.8V, 0.9V, 1.0V, 1.2V, 1.5V, 1.8V, 2.5V or 3.3V output voltage
View More
Overview
Documents
Development Environment
RoHS Information
Add To Cart

Device Overview

Summary

The MIC23650 is a high-efficiency, low-voltage input, 6A peak current synchronous step-down regulator. The Constant-ON-Time (COT) control architecture with HyperLight Load™ provides very high efficiency at light loads, while still having ultra-fast transient response.

The MIC23650 output voltage is set by two VSEL (Voltage Selection) pins, between nine different values. This method eliminates the need for an external feedback resistor divider and improves the output voltage setting accuracy. 

The 2.4V to 5.5V input voltage range, low shutdown and quiescent currents make the MIC23650 ideal for single-cell Li-Ion battery-powered applications. The 100% duty cycle capability provides low dropout operation, extending operating range in portable systems.

The MIC23650 pinout is compatible with the MIC23656 I 2C-based programmable regulator version, such that applications can be easily converted. An open-drain Power Good output is provided to indicate when the output voltage is within 9% of regulation and facilitates the interface with an MCU, or power sequencing. If set in shutdown (EN=GND), the MIC23650 typically draws 1.5 µA, while the output is discharged through 10W pull-down.

The MIC23650 is available in a thermally efficient, 16 Lead 2.5 mm x 2.5 mm x 0.55 mm thin FTQFN package, with an operating junction temperature range from –40°C to +125°C.

Additional Features
  • 2.4V to 5.5V Input Voltage Range
  • 6A (Pulsed) Output Current
  • Reduced Component Count (No Feedback Resistors)
  • High Efficiency (up to 95%)
  • Output Discharge when Disabled
  • Constant-ON-Time Control with High Switching Frequency:
  • 1.2 MHz typical at 1.0V output voltage
  • ±1.5% Output Voltage Accuracy Over Line/Load/Temperature Range
  • 0.8 ms/V Soft Start Speed
  • Supports Safe Start-Up with Pre-Biased Output
  • Typical 1.5 µA Shutdown Supply Current
  • Low Dropout Operation (100% Duty Cycle)
  • Ultra Fast Transient Response
  • Latch-Off Thermal Shutdown Protection
  • Latch-Off Current Limit Protection
  • Power Good (PG) Open-Drain Output
  • Pin Strapping Voltage Selection:
    • Three-State pins (nine voltage options)
    • 0.6V, 0.8V, 0.9V, 1.0V, 1.2V, 1.5V, 1.8V, 2.5V or 3.3V output voltage
Parametrics
Name
Value
Regulator Type
Step Down (Buck)
# of Outputs
1
Input Voltage Range Min (V)
2.4
Input Voltage Range Max (V)
5.5
Output Voltage Range Min (V)
0.6
Output Voltage Range Max (V)
3.84
Output Current (mA) max
6000
Quiescent Current (mA) typ
.060
Switching Frequency (kHz)
1200
Synchronous Rectifier
Yes
Operating Temp Range
-40 to 125
Vfb (V)
0.6
Duty Cycle Max (%)
100
SHUTDOWN Current (µA) (Typ)
1.5
Light Load Efficiency Mode
Yes

Documents

Jump to:

Data Sheets

02/26/2019
709KB

Development Environment

  • Demo & Evaluation Boards
Demo & Evaluation Boards
MIC23650 6A Synch Buck Regulator Eval Bd
MIC23650 6A Synch Buck Regulator Eval Bd ( ADM00885 )

The MIC23650 Evaluation Board is developed to evaluate and demonstrate Microchip Technology’s MIC23650 product. The board features the MIC23650 in a typical Buck application supplied from an external source, between 2.4V – 5.5V. Nine output voltage levels can be set via two Voltage Select pins. Test connectors allow probing, while the board can be loaded up to 6A.

Learn More
Add To Cart

RoHS Information

Part Number
Device Weight (g)
Shipping Weight (grams)
Lead Count
Package Type
Package Width
Solder Composition
JEDEC Indicator
RoHS
China EFUP
MIC23650YFT-TR
0.150000
16
UQFN
2.5x2.5x0.6mm
Matte Tin
e3
To see a complete listing of RoHS data for this device, please Click here
Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.

Buy from the Microchip Store

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy