Microchip logo
Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

ATTINY1617

Status: In Production

Features:

  • Hardware multiplier
  • Three sleep modes:
  • Idle
  • Standby
  • Power Down
  • Event System 
  • Watchdog Timer (WDT)
  • Power-On Reset (POR)
  • Brown-Out Detection (BOD)
  • Single pin programming and debugging interface (UPDI)
  • 12 Channel 10-bit ADC with Voltage Reference
  • 8-bit Digital to Analog Converter (DAC)
  • Comparators
  • Configurable Custom Logic (CCL)
  • 1x 12-bit Timers (TCD)
  • 2x 16-bit Timer (TCA / TCB)
  • Cyclical Redundancy Check (CRC/SCAN)
  • Peripheral Touch Controller (PTC)
  • 14 channels self-capacitance
  • 49 mutual-capacitance buttons supported
  • SPI / I2C / USART
View More
Overview
Documents
Development Environment
Similar Devices
RoHS Information
Buy Now

Device Overview

Summary

The ATtiny1617 is a microcontroller featuring the 8-bit AVR®  processor with hardware multiplier - running at up to 20MHz and with 16 KB Flash, 2 KB SRAM and 128 bytes of EEPROM in a 24-pin package. The series uses the latest Core Independent Peripherals with low power features.  Including Event System, intelligent analog and advanced peripherals. Capacitive touch interfaces with proximity sensing and driven shield are supported by the integrated QTouch®  peripheral touch controller.

Additional Features

    8-bit high-performance AVR RISC CPU

    • Hardware multiplier
    • Three sleep modes:
      • Idle
      • Standby
      • Power Down
    • Event System 
    • Watchdog Timer (WDT)
    • Power-On Reset (POR)
    • Brown-Out Detection (BOD)
    • Single pin programming and debugging interface (UPDI)

    Analog Features

    • 12 Channel 10-bit ADC with Voltage Reference
    • 8-bit Digital to Analog Converter (DAC)
    • Comparators

    Timing/Waveform/Measurement Control 

    • Configurable Custom Logic (CCL)
    • 1x 12-bit Timers (TCD)
    • 2x 16-bit Timer (TCA / TCB)
    • Cyclical Redundancy Check (CRC/SCAN)

    Communication

    • Peripheral Touch Controller (PTC)
    • 14 channels self-capacitance
    • 49 mutual-capacitance buttons supported
    • SPI / I2C / USART
Parametrics
Name
Value
Program Memory Type
Flash
Program Memory Size (KB)
16
CPU Speed (MIPS/DMIPS)
20
SRAM Bytes
2,048
Data EEPROM/HEF (bytes)
256
Digital Communication Peripherals
1-UART, 1-SPI, 1-I2C
Capture/Compare/PWM Peripherals
2 Input Capture, 6PWM
Timers
1 x 8-bit, 3 x 16-bit
ADC Input
20 ch, 10-bit
Number of Comparators
3
Temperature Range (C)
-40 to 125
Operating Voltage Range (V)
1.8 to 5.5
Pin Count
24

Documents

Jump to:

Data Sheet

Application Notes

Download All

Product Document

12/10/2016
2468KB

User Guides

12/10/2016
8594KB
08/02/2017
312KB

White Papers

Development Environment

  • Demo & Evaluation Boards
  • Emulators & Debuggers
  • Programmers
  • Application Examples
Demo & Evaluation Boards
Secure AVR BLE IoT
Secure AVR BLE IoT ( ATAVRBLE-IOT )

The Secure AVR® BLE IoT Node incorporates an ATtiny1617 microcontroller, a fully-certified RN4871 Bluetooth® 4.2 Low Energy module, an ATECC508A CryptoAuthentication device and a 3-axis accelerometer with temperature sensor to demonstrate a complete solution for a typical IoT end node. The board is powered by USB or CR2032 coin cell via a jumper.

It is...

Learn More
Add To Cart
ATTINY817-QTMOISTD
ATTINY817-QTMOISTD ( ATTINY817-QTMOISTD )

The ATtiny817 QTouch Moisture Demo Kit demonstrates the high performance capacitive touch support of the Peripheral Touch Controller (PTC) while achieving best-in-class conducted immunity and moisture tolerance. It has driven shield for better noise immunity and water tolerance. It implements a robust solution that allows customers to easily incorporate the QTouch technology into designs that...

Learn More
Add To Cart
ATSTK600 Kit
ATSTK600 Kit ( ATSTK600 )

A complete starter kit and development system for the 8-bit and 32-bit AVR microcontrollers that gives designers a quick start to develop code on the AVR, with advanced features for prototyping and testing new designs.

The AVR device connects to the STK600 using an innovative routing and socketcard sandwich system, which routes the signals from the device to the appropriate...

Learn More
Add To Cart
Power Debugger kit
Power Debugger kit ( ATPOWERDEBUGGER )

Power Debugger is a powerful development tool for debugging and programming AVR microcontrollers using UPDI, JTAG, PDI, debugWIRE, aWire, TPI or SPI target interfaces and ARM® Cortex®-M based SAM microcontrollers using JTAG or SWD target interfaces.

In addition the Power Debugger has two independent current sensing channels for measuring and optimizing the power consumption of

...

Learn More
Add To Cart
Water Tolerant Touch Surface Development Kit
Water Tolerant Touch Surface Development Kit ( DM080101 )

The DM080101 Water Tolerant Touch Surface development kit enables easy evaluation of the 2D Touch Surface library. The kit demonstrates water tolerance and noise immunity on a touch pad and has two touch buttons, all controlled by the same MCU.

...

Learn More
Add To Cart
ATtiny3217 Xplained Pro Evaluation Kit
ATtiny3217 Xplained Pro Evaluation Kit ( ATTINY3217-XPRO )

The ATtiny3217 Xplained Pro evaluation kit is a hardware platform for evaluating the latest tinyAVR® microcontrollers. The evaluation kit comes with a fully integrated debugger that provides seamless integration with Atmel Studio.

The ATtiny3217 Xplained Pro is recommended for evaluation of the following products: ATtiny3217, ATtiny3216, ATtiny1617, ATtiny1616, ATtiny1614,

...

Learn More
Add To Cart
Emulators & Debuggers
MPLAB PICkit 4 In-Circuit Debugger
MPLAB PICkit 4 In-Circuit Debugger ( PG164140 )

Fast programming, increased functionality, at the same price as its predecessor.


The MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast and easy debugging and programming of PIC® ,  dsPIC®, and CEC flash microcontrollers, using the powerful graphical user interface of MPLAB X Integrated Development Environment

...

Learn More
Add To Cart
Programmers
MPLAB PICkit 4 In-Circuit Debugger
MPLAB PICkit 4 In-Circuit Debugger ( PG164140 )

Fast programming, increased functionality, at the same price as its predecessor.


The MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast and easy debugging and programming of PIC® ,  dsPIC®, and CEC flash microcontrollers, using the powerful graphical user interface of MPLAB X Integrated Development Environment

...

Learn More
Add To Cart

Similar Devices

Product
Pins
Flash (KB)
RAM (B)
Price 5K
Notes
14
16
2,048
$0.52
Event System and Peripheral Touch Controller
20
16
2,048
$0.55
Event System and Peripheral Touch Controller
24
16
2,048
$0.66
Event System and Peripheral Touch Controller
8
2
128
$0.31
Event System
14
2
128
$0.37
Event System
20
32
2,048
$0.73
Event System and Peripheral Touch Controller
24
32
2,048
$0.71
Event System and Peripheral Touch Controller
8
4
256
$0.33
Event System
14
4
256
$0.39
Event System
20
4
256
$0.45
Event System
24
4
256
$0.57
Event System
14
8
256
$0.46
Event System and Peripheral Touch Controller
20
8
512
$0.50
Event System and Peripheral Touch Controller
24
8
512
$0.64
Event System and Peripheral Touch Controller

RoHS Information

Part Number
Device Weight (g)
Shipping Weight (Kg)
Lead Count
Package Type
Package Width
Solder Composition
JEDEC Indicator
RoHS
China EFUP
ATTINY1617-MNR
0.041400
0.272167
24
VQFN
4x4x0.9mm
Matte Tin
e3
ATTINY1617-MFR
0.041400
0.272167
24
VQFN
4x4x0.9mm
Matte Tin
e3
ATTINY1617-MF
0.041400
0.389796
24
VQFN
4x4x0.9mm
Matte Tin
e3
ATTINY1617-MN
0.041400
0.389796
24
VQFN
4x4x0.9mm
Matte Tin
e3
To see a complete listing of RoHS data for this device, please Click here
Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.

Buy from the Microchip Store

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy