Thank you for your request. We will reply back with quotation as soon as possible! If you have any questions in the meantime, feel free to contact us here .
The MCP16361 Evaluation Board has the following features:
Input Voltage Range (VIN): 4V – transient up to 48V
Output Voltage: 3.3V
Output current: typically, 3A @ 3.3V Output, 12V Input
Automatic PFM/PWM Operation for MCP16361
PWM Switching Frequency: 2.2 MHz
Low Device Shutdown Current: 5 µA typical
Low Device Quiescent Current: 20 µA typical (not switching)
Integrated N-channel Buck Switch ON state resistance: 100 mΩ
Internal Soft Start
Internal bootstrap diode
Internal Current limit
Power Good Output
Overtemperature protection (if the die temperature exceeds 155°C, with 25°C hysteresis)
The MCP16361/2/3 can regulate the output voltage over a wide 2V to 20V range, and typically can deliver over 3A of load current at 3.3V output, when supplied from a 12V input. The maximum input voltage range is 4V to 48V. The regulated voltage (VOUT) should be lower than the input voltage (VIN).