Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

PM8596

Smart Memory Controller (SMC) 1000 8x25G

Status: New Device Entry

Features:

  • OMI Interface
  • DDR4 Memory Interface
  • Persistent Memory Support
  • Security and Data Protection
  • Peripherals Support
  • Small Package and Low-Power
View More
Overview
Documents
Development Environment
RoHS Information
Add To Cart

Device Overview

Summary

The SMC 1000 8x25G serial memory controller enables CPUs and other compute-centric SoCs to utilize four times the memory channels of parallel attached DRAM within the same package footprint compared to DDR4. The SMC 1000 8x25G enables higher memory bandwidth and media independence for High Performance Computing (HPC), big data, artificial intelligence and machine learning compute-intensive applications with ultra-low latency.

The SMC 1000 8x25G interfaces to the CPU via a narrow 8-lane differential Open Memory Interface (OMI)-compliant 25 Gbps interface and bridges to memory via a wide 72-bit DDR4 3200 interface. The product supports three DDR4 data rates, resulting in a significant reduction in the required number of host CPU or SoC pins per DDR4 memory channel, allows for more memory channels and therefore increases the memory bandwidth available. The SMC 1000 8x25G also features an innovative low latency design which results in memory systems using the product to have virtually identical bandwidth and latency performance to comparable LRDIMM products. The SMC 1000 8x25G combines data and address into one unified chip compared to LRDIMM which utilizes an RCD buffer and separate data buffers. This device is a foundational building block for a wide range of OMI memory applications. These include Differential Dual-Inline Memory Module (DDIMM) applications such as standard height 1U DDIMMs with capacities from 16 GB to 128 GB and double height 2U DDIMMs with capacities beyond 256 GB. SMC 1000 8x25G also supports chip down applications to off the shelf Registered DIMMs (RDIMM) and NVDIMM-N devices.

The SMC 1000 8x25G integrates an on-chip processor that performs control path and monitoring functions such as initialization, temperature monitoring, and diagnostics. The device supports manufacturing test operations of attached DRAM memory. Microchip’s Trusted Platform support, including hardware root-of-trust, ensures device and firmware authenticity and supports secure firmware update.

Additional Features
  • OMI Interface
    • 1x8, 1x4 support
    • OIF-28G-MR
    • Up to 25.6 Gbps Link Rate
    • Dynamic low power modes
  • DDR4 Memory Interface
    • x72 bit DDR4-3200, 2933, or 2666 MT/s memory support
    • Supports up to 4 ranks
    • Supports up to 16 GB memory devices
    • 3D stacked memory support
  • Persistent Memory Support
    • Support for NVDIMM-N modules
  • Intelligent Firmware
    • Open Source Firmware
    • On-board processor provides DDR/OMI initialization, and in-band temperature and error monitoring
    • ChipLink GUI
  • Security and Data Protection
    • Hardware root-of-trust, secure boot, and secure update
    • Single symbol correction/double symbol detection ECC
    • Memory scrub with auto correction on errors
  • Peripherals Support
    • Support for SPI, I²C, GPIO, UART and JTAG/EJTAG
  • Small Package and Low-Power
    • Power optimized
    • 17 mm x 17 mm package

Documents

Jump to:

Brochures

  
331KB

Development tools data is currently unavailable.


Rohs data is currently unavailable.

Buy from Microchip

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy