Microchip Technology Inc

PIC18F45K50

In Production

 

    Features

      • High performance PIC18 core with 8x8 Hardware Multiply
      • Flash Program Memory with self read/write capability
      • 256 Bytes of integrated EEPROM
      • Internal 48MHz Oscillator with USB Accuracy -Via Active Clock Tuning from USB Host
      • Universal Serial Bus 2.0 Module
      • Enhanced Capture Compare PWM (ECCP) Module with up to 4 outputs
      • Integrated Temperature Indicator Module
      • Up to 25 Channel 10-bit ADC with Voltage Reference
      • 2 Analog Comparators
      • 5-bit Digital to Analog Converter (DAC)
      • MI2C / SPI Module (MSSP)
      • Enhanced Addressable USART Module
      • Charge Time Measurement Unit (CTMU) for measurement applications
      • 25mA Source/Sink current I/O
      • 2x 8-bit Timers
      • 2x 16-bit Timers
      • Extended Watchdog Timer (WDT)
      • Enhanced Power-On/Off-Reset
      • Low-Power Brown-Out Reset (LPBOR)
      • Programmable Brown-Out Reset (BOR)
      • In Circuit Serial Programming and Debug (ICSP/ICD)
      • PIC18LF2xK50 (1.8V – 3.6V) with nanoWatt XLP
      • PIC18F2xK50 (1.8V – 5.5V)
    Parameter Name
    Value
    Program Memory Type
    Flash
    Program Memory (KB)
    32
    CPU Speed (MIPS)
    12
    RAM Bytes
    2,048
    Data EEPROM (bytes)
    256
    Digital Communication Peripherals
    1-UART, 1-SPI, 1-I2C1-MSSP(SPI/I2C)
    Capture/Compare/PWM Peripherals
    1 ECCP,
    Timers
    2 x 8-bit, 2 x 16-bit
    ADC
    25 ch, 10-bit
    Comparators
    2
    USB (ch, speed, compliance)
    1, FS Device
    Temperature Range (C)
    -40 to 125
    Operating Voltage Range (V)
    1.8 to 5.5
    Pin Count
    40
    Low Power
    Yes
    Cap Touch Channels
    25
    Documentation
    Data Sheets
    07/07/2014
    5103KB
      Errata
     
     
     
     
    Errata
    01/15/2014
    256KB
      Programming Specifications
     
     
     
     
    Programming Specification
    09/05/2012
    553KB
      Application Notes
     
     
     
    AppNote
    07/30/2012
    1414KB
    AppNote
    09/14/2017
    984KB
    AppNote
    01/21/2016
    2087KB
    AppNote
    04/10/2017
    1557KB
      ApplicationNote Literature
     
     
     
    AppNoteLiterature
    05/30/2017
    3028KB
    AppNoteLiterature
    01/21/2016
    684KB
    AppNoteLiterature
    01/21/2016
    417KB
      Product Brief
     
     
     
     
    Product Brief
    08/01/2012
    100KB
    Pricing & Samples
    All pricing shown in USD only.
    Part Number
    Leads
    Package Type
    Temp Range
    Packing
    1+
    26+
    100+
    1000+
    5000+
    Buy
    Sample
    PIC18F45K50-E/MV
    40
    UQFN
    -40C to +125C
    TUBE
    3.01
    2.76
    2.50
    2.30
    2.19
     
    PIC18F45K50-E/P
    40
    PDIP
    -40C to +125C
    TUBE
    3.20
    2.94
    2.66
    2.45
    2.33
     
    PIC18F45K50-E/PT
    44
    TQFP
    -40C to +125C
    TRAY
    3.01
    2.76
    2.50
    2.30
    2.19
     
    PIC18F45K50-I/MV
    40
    UQFN
    -40C to +85C
    TUBE
    2.74
    2.51
    2.27
    2.09
    1.99
    PIC18F45K50-I/P
    40
    PDIP
    -40C to +85C
    TUBE
    2.93
    2.69
    2.43
    2.24
    2.13
    PIC18F45K50-I/PT
    44
    TQFP
    -40C to +85C
    TRAY
    2.74
    2.51
    2.27
    2.09
    1.99
    PIC18F45K50T-I/MV
    40
    UQFN
    -40C to +85C
    T/R
    2.76
    2.53
    2.29
    2.10
    2.00
     
    PIC18F45K50T-I/PT
    44
    TQFP
    -40C to +85C
    T/R
    2.76
    2.53
    2.29
    2.10
    2.00
     
    PIC18LF45K50-E/MV
    40
    UQFN
    -40C to +125C
    TUBE
    3.01
    2.76
    2.50
    2.30
    2.19
     
    PIC18LF45K50-E/P
    40
    PDIP
    -40C to +125C
    TUBE
    3.20
    2.94
    2.66
    2.45
    2.33
     
    PIC18LF45K50-E/PT
    44
    TQFP
    -40C to +125C
    TRAY
    3.01
    2.76
    2.50
    2.30
    2.19
     
    PIC18LF45K50-I/MV
    40
    UQFN
    -40C to +85C
    TUBE
    2.74
    2.51
    2.27
    2.09
    1.99
    PIC18LF45K50-I/P
    40
    PDIP
    -40C to +85C
    TUBE
    2.93
    2.69
    2.43
    2.24
    2.13
    PIC18LF45K50-I/PT
    44
    TQFP
    -40C to +85C
    TRAY
    2.74
    2.51
    2.27
    2.09
    1.99
    PIC18LF45K50T-I/MV
    40
    UQFN
    -40C to +85C
    T/R
    2.76
    2.53
    2.29
    2.10
    2.00
     
    PIC18LF45K50T-I/PT
    44
    TQFP
    -40C to +85C
    T/R
    2.76
    2.53
    2.29
    2.10
    2.00
     

    ** Device not available to purchase online. Please contact a sales office for pricing information.
    Open a microchipDIRECT account today!

    Development Tools
    • Demo & Eval Boards
    • Emulation & Debuggers
    • Programmers
    • PICDEM FS USB Demo Board (PIC18F45K50) ( DM163025-1 )

      PICDEM

    • PICkit 44-Pin Demo Board (PIC18F45K20) ( DM164130-4 )

      (Not Recommended for new design)
      PICkit

      This is a small demo board with a PIC18F45K20 device on board and a small, surface-mount prototype area. Use it with a PICkit 3 In-Circuit Debugger to program your code via a 6-pin ICSP header on the board. This product also includes two bare PCB boards for those interested in customizing their development. This 44-Pin Demo Board also comes bundled with the PICkit 3 Debug Express if you order the...

    • Explorer 8 Development Kit ( DM160228 )

      Explorer

      Summary
      The Explorer 8 Development Kit is a full-featured development board and platform for 8-bit PIC® microcontrollers. This kit is a versatile development solution, featuring several options for external sensors, off-board communication and human interface. Additionally, it offers ample room for expansion, making it an excellent solution for developers and engineers looking for a...

    • PICDEM Lab II Development Platform ( DM163046 )

      PICDEM

      Summary
      The PICDEM™ Lab II Development Board is a development and teaching platform for use with 8-bit PIC® microcontrollers (MCUs). At its center, a large prototyping breadboard enables users to easily "experiment" with different values and configurations of analog components for system optimization. Several external connectors allow for user-customizable expansion, while our...

    • MPLAB ICD 4 In-Circuit Debugger ( DV164045 )

      MPLAB

      The MPLAB® ICD 4 In-Circuit Debugger/Programmer is Microchip’s fastest, cost-effective debugging and programming tool for PIC® Microcontrollers (MCUs) and dsPIC® Digital Signal Controllers (DSCs). This speed is provided by a 300 MHz, 32-bit MCU with 2MB of RAM and a high-speed FPGA to yield faster communications, downloads and debugging. It...

    • PICkit 3 In-Circuit Debugger ( PG164130 )

      PICkit

      Microchip’s PICkit™ 3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. In-circuit debugging offers these benefits:

      • Low cost
      • Minimum of additional hardware needed for debug
      • Expensive sockets or adapters are not required...

      Debug Features:
      Stop watch:True
      Break on stack overflow:True
      Pgm-memory HW breakpoints:3
      Data-memory breakpoints:3
      WDT overflow:True
      Pass counter:True

    • MPLAB ICD 3 In-Circuit Debugger ( DV164035 )

      MPLAB

      MPLAB® ICD 3 In-Circuit Debugger System is Microchip's most cost effective high-speed hardware debugger/programmer for Microchip Flash Digital Signal Controller (DSC) and microcontroller (MCU) devices. It debugs and programs PIC® Flash microcontrollers and dsPIC® DSCs with the powerful, yet easy-to-use graphical user interface of MPLAB Integrated Development Environment (IDE).

      Debug Features:
      WDT overflow:True
      Data-memory breakpoints:3
      Pgm-memory SW breakpoints:Unlimited
      Pass counter:True
      Break on stack overflow:True
      Stop watch:True
      Pgm-memory HW breakpoints:3

    • MPLAB REAL ICE PROBE KIT ( DV244005 )

      MPLAB

      MPLAB REAL ICE In-Circuit Emulator System is Microchip’s next generation high speed emulator for Microchip Flash DSC® and MCU devices. It debugs and programs PIC® and dsPIC® Flash microcontrollers with the easy-to-use but powerful graphical user interface of the MPLAB Integrated Development Environment (IDE), included with each kit.
      The MPLAB REAL ICE probe is connected...

      Debug Features:
      Pgm-memory HW breakpoints:3
      Native Trace:True
      Break on stack overflow:True
      I/O Port Trace:True (Requires Compiler Support)
      Runtime watch:Supported
      WDT overflow:True
      Stop watch:True
      SPI Trace:True (Requires Compiler Support)
      Data-memory breakpoints:3
      Data capture:Enabled
      Pgm-memory SW breakpoints:Unlimited
      Pass counter:True

    • MPLAB ICD 4 In-Circuit Debugger ( DV164045 )

      MPLAB

      The MPLAB® ICD 4 In-Circuit Debugger/Programmer is Microchip’s fastest, cost-effective debugging and programming tool for PIC® Microcontrollers (MCUs) and dsPIC® Digital Signal Controllers (DSCs). This speed is provided by a 300 MHz, 32-bit MCU with 2MB of RAM and a high-speed FPGA to yield faster communications, downloads and debugging. It...

    • PICkit 3 In-Circuit Debugger ( PG164130 )

      PICkit

      Microchip’s PICkit™ 3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. In-circuit debugging offers these benefits:

      • Low cost
      • Minimum of additional hardware needed for debug
      • Expensive sockets or adapters are not required...

    • MPLAB PM3 Universal Device Programmer ( DV007004 )

      MPLAB

      The MPLAB® PM3 Universal Device Programmer is easy to use and operates with a PC or as a stand-alone unit, and programs Microchip's entire line of PIC® devices as well as the latest dsPIC® DSC devices. When used standalone, data can be loaded and saved with the SD/MMC card (not included).

      • Socket: AC164348   PartNo: PIC18F45K50 (40MV)
      • Socket: AC164305   PartNo: PIC18F45K50 (44PT)
    • MPLAB ICD 3 In-Circuit Debugger ( DV164035 )

      MPLAB

      MPLAB® ICD 3 In-Circuit Debugger System is Microchip's most cost effective high-speed hardware debugger/programmer for Microchip Flash Digital Signal Controller (DSC) and microcontroller (MCU) devices. It debugs and programs PIC® Flash microcontrollers and dsPIC® DSCs with the powerful, yet easy-to-use graphical user interface of MPLAB Integrated Development Environment (IDE).

    • MPLAB REAL ICE PROBE KIT ( DV244005 )

      MPLAB

      MPLAB REAL ICE In-Circuit Emulator System is Microchip’s next generation high speed emulator for Microchip Flash DSC® and MCU devices. It debugs and programs PIC® and dsPIC® Flash microcontrollers with the easy-to-use but powerful graphical user interface of the MPLAB Integrated Development Environment (IDE), included with each kit.
      The MPLAB REAL ICE probe is connected...

    Similar Devices
    Product
    Pins
    Flash
    RAM
    Price5K
    Notes
    28
    16
    2,048
    $1.65
     
    28
    32
    2,048
    $1.76
     
    40
    32
    2,048
    $1.99
     
    RoHS Information
    Part
    Number
    Device
    Weight
    Shipping
    Weight
    Lead
    Count
    Package
    Type
    Package
    Width
    Solder
    Composition
    JEDEC
    Indicator
    RoHS
     
    China
    EFUP
    PIC18F45K50-E/P
    6.500000
    10.600000
    40
    PDIP
    .600in
    Matte Tin
    e3
    PIC18F45K50-I/P
    6.500000
    10.600000
    40
    PDIP
    .600in
    Matte Tin
    e3
    PIC18F45K50-E/PT
    0.273300
    1.187500
    44
    TQFP
    10x10x1mm
    Matte Tin
    e3
    PIC18F45K50T-I/PT
    0.273300
    0.599000
    44
    TQFP
    10x10x1mm
    Matte Tin
    e3
    PIC18F45K50-I/PT
    0.273300
    1.187500
    44
    TQFP
    10x10x1mm
    Matte Tin
    e3
    PIC18F45K50-E/MV
    0.042500
    0.109589
    40
    UQFN
    5x5x0.5mm
    Matte Tin
    e3
    PIC18F45K50T-I/MV
    0.042500
    0.166970
    40
    UQFN
    5x5x0.5mm
    Matte Tin
    e3
    PIC18F45K50-I/MV
    0.042500
    0.109589
    40
    UQFN
    5x5x0.5mm
    Matte Tin
    e3
    To see a complete listing of RoHS data for this device, please Click here
    Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.