We detect you are using an unsupported browser. For the best experience, please visit the site using Chrome, Firefox, Safari, or Edge. X
Maximize Your Experience: Reap the Personalized Advantages by Completing Your Profile to Its Fullest. Update Here
Stay in the loop with the latest from Microchip. Update your profile while you are at it. Update Here
Complete your profile to access more resources. Update Here

SVM


SVM is a motor-control IP core that applies space vector modulation to three-phase voltage references before pulse-width modulation generation. It exists to improve DC bus utilization and waveform quality in field-oriented control and inverter-based motor drive designs. The core uses a Min-Max modulation approach that derives a common-mode component from the instantaneous phase references, then adds that component back to each phase. This method increases the available fundamental output voltage while reducing harmonic content and limiting unwanted short pulses in the resulting waveform. By moving this computation into dedicated FPGA logic, the core helps designers offload time-critical modulation tasks from the processor and create a more deterministic control path. Its architecture fits systems that need predictable real-time behavior, efficient inverter operation, and cleaner motor excitation without adding complex software processing. The core is especially useful when the control loop already produces phase voltage commands and needs a hardware block to transform them into space-vector-modulated references for downstream pulse-width modulation stages. It delivers the most value in embedded motor-control systems that demand efficient power conversion, stable control behavior, and FPGA-based acceleration.

Features and Benefits


  • Modulation method
    - Implements the Min-Max method
    - Generates a common-mode offset from phase references
    - Adds third harmonic content to each phase output
  • Signal processing
    - Accepts phase reference inputs va_i, vb_i, and vc_i
    - Produces modulated outputs va3h_o, vb3h_o, and vc3h_o
    - Computes output voltages from instantaneous three-phase values
  • Control signaling
    - Uses sys_clk_i and reset_i control inputs
    - Starts processing through start_i
    - Asserts done_o on computation completion
  • Core integration
    - Operates as a synchronous hardware block
    - Uses a Finite State Machine control architecture
    - Instantiates through SmartDesign in Libero® SoC software

Licensing Options


Encrypted RTL free with any Libero license 

Documentation


Title
Space Vector Modulation v4.2 User Guide Download



Live Chat

Need Help?

Privacy Policy