Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

Standalone Programmable USB-C Power Delivery Controller

UPD301C

USB Type-C Power Delivery Controller

Status: In Production

View More
Overview
Documents
Development Environment
Similar Devices
RoHS Information
Add to Cart

Device Overview

Summary

The UPD301B/C is a stand-alone, small form factor USB Type-C™ Power Delivery (PD) Port Controller compliant with the USB Type-C™ Power Delivery 3.0 Specification. The UPD301B/C provides stand-alone operation for a wide range of PD applications, enabling cable plug orientation and detection for a USB Type-C receptacle, and implementing baseband communication with the connecting USB Type-C device via the integrated USB Power Delivery 3.0 MAC.


The UPD301B/C is an integrated PD solution with the functionality of a SAMD20 (32-bit ARM Cortex-M0+) microcontroller and a UPD350 PD MAC/PHY. Optionally, a second, third, or fourth PD port is supported via SPI connection to additional external Microchip UPD350 devices. The embedded 32-bit ARM Cortex-M0+ executes the Microchip USB Power Delivery Software Framework (PSF) Power Delivery stack.  Microchip PSF is available at the MicrochipGitHub location. A Quick Start Guide and User Manual are also available on the GitHub page. The UPD301B/C devices are shipped blank and require programming with compiled application specific code before operation. Programming is supported by Microchip's industry standard MPLAB X IDE programming environment.  


The PSF firmware stack allows for a wide range of USB Power Delivery applications, including but not limited to: Single or Multi-Port Source Only applications, Bus-Powered Sink applications, Battery-Powered Sink applications, and Dual Role Data / Dual Role Power applications such as PD-based docking stations or PD-based dongles. Charge only applications are support in the UPD301B, while all others are supported in the UPD301C. The PSF firmware stack is a continuously deployed open source stack. Not all features that are able to be supported by the UPD301B/C device are necessarily supported by PSF. The supported features may be expanded over time. Additional feature development or status of basic feature development may be requested through Microchip support channels.


By integrating the PD firmware and many of the analog discrete components required for USB Type-C PD applications, the UPD301B/C provides a flexible, stand-alone, PD solution for designers who wish to integrate the PD operation with a system controller, implement a custom power supply circuit, support unique PDOs or charging algorithms, or simply control their own PD code.

Additional Features
  • •USB Type-C™ (1) Power Delivery (PD) Solution for Stand-alone Source-only,
  • Sink-only Applications, Dual Role Power,and Dual Role Data applications.
  • • Companion device for USB PD Software Framework (PSF) open source firmware stack
  • • Fully Customizable software
  • • Standard Power Delivery power profiles (15/27/45/60/100W) supported with no software modification
  • • USB Power Delivery 3.0 compliant MAC
  • • USB Type-C™ connector support with connection detection and control
  • • Integrated Analog Discrete Components Reduce Bill of Materials and Design Footprint
  • • Easily Supports up to 3 additional Power Delivery ports Port via UPD350 Add-on
  • • Commercial, Industrial, and Automotive Temperature Support
  • 32-bit ARM Cortex-M0+ CPU w/ 64KB Flash memory
  • • Optional Two, Three, or Four Port Solution via External UPD350. One Power Delivery Firmware Stack Controls All Ports
  • • Integrated Analog Discrete Components including VCONN FETs with Rp/Rd Switching.
  • • Optional Dead Battery Rd termination
  • • Programmable Current Sense for Overcurrent Conditions
  • • Voltage Sense for Overvoltage Conditions
  • • USB Power Delivery MAC compliant with USB Power Delivery Specification Revision 3.0
  • • USB Type-C Cable Detect Logic
  • • 10 Configurable General Purpose I/O Pins
  • • 40-VQFN 6mm x 6mmPackage
Parametrics
Name
Value
Mode
UFP, DFP
Modulation
USB Type-C
Temp. Range Min.
-40
Temp. Range Max.
85
Package
40-VQFN 6x6mm

Documents

Jump to:

Development Environment

  • Demo & Evaluation Boards
Demo & Evaluation Boards
EVB-UPD301 Evaluation Kit
EVB-UPD301 Evaluation Kit ( DT100121 )

The UPD301A is a stand-alone, small form factor USB Type-C™ Power Delivery (PD) Port Controller designed to adhere to the USB Type-C™ Cable and Connector Specification and USB Power Delivery 3.0 Specification. The UPD301A provides stand-alone operation for source PD applications, enabling cable plug orientation and detection for a USB Type-C receptacle, and implementing baseband

...

Learn More
Add To Cart

Similar Devices

Product
Price 5K
 
$1.66
$1.66
$1.66
$1.66
$1.66
$1.66
$0.86
$0.86
$0.86
$0.86
$0.86
$1.29
$1.29
$1.29
$1.29
$0.67

RoHS Information

Part Number
Device Weight (g)
Shipping Weight (Kg)
Lead Count
Package Type
Package Dimension
Solder Composition
JEDEC Indicator
RoHS
China EFUP
UPD301C/KYX
0.105700
0.626531
40
VQFN
6x6x0.9mm
Matte Tin
e3
UPD301C-I/KYX
0.105700
0.626531
40
VQFN
6x6x0.9mm
Matte Tin
e3
UPD301CT/KYX
0.105700
0.300000
40
VQFN
6x6x0.9mm
Matte Tin
e3
UPD301CT-I/KYX
0.105700
0.300000
40
VQFN
6x6x0.9mm
Matte Tin
e3
To see a complete listing of RoHS data for this device, please Click here
Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.

Buy from Microchip

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy