Playlist: https://www.youtube.com/playlist?list=PLtQdQmNK_0DR-zoimPQ_BgGdUrvqr-9im This is the first of four videos in the Getting Started with the Home Automation Kit Series, which consists of an Microchip AVR®-IoT WG Board, a Stepper 2 Click from MikroElektronika and a Stepper Motor. The video series walks you through connecting the kit to the cloud, writing custom code, using a stepper 2 click driver and controlling the motor from a cloud interface. There exists accompanying written user guides that go into more detail, see links further down. Two example applications are also available, the Weather Clock and Automatic Blinds, see links below. ---------------------------- Topics Covered in this Video ---------------------------- * Explanation of Project * Connecting the AVR-IoT WG Board to the Cloud * Sending and Receiving Basic Sensor Data ----- LINKS ----- Hardware: * IoT Home Automation Kit: https://www.digikey.com/product-detail/en/digi-key-kit-va/IOT-HOME-KIT/IOT-HOME-KIT-ND/10669056 * AVR-IoT WG Dev Board: https://mchp.us/2VWML7W Software: * Atmel Studio: https://mchp.us/2Iv3Rlt * Documentation: https://mchp.us/2xpjQPI * MPLAB® Data Visualizer: https://mchp.us/2wGWvIY User Guides: * Getting Started with the AVR® Home Automation Kit: https://mchp.us/2vS1WEO * Home Automation - Weather Clock: https://mchp.us/2VYpfat * Home Automation - Automatic Blinds: https://mchp.us/2TTmncm Source Code: * AVR-IoT WG Board Default Firmware: https://start.atmel.com/#example/Atmel%3AAVR_IoT_WG_Sensor_Node%3A1.1.1%3A%3AApplication%3AAVR_IoT_WG_Sensor_Node%3A * AVR-IoT WG Board with Stepper 2 Click Firmware: https://start.atmel.com/#example/Atmel%3AAVR_IoT_WG_Sensor_Node_With_Stepper_2_Click%3A1.1.1%3A%3AApplication%3AAVR_IoT_WG_Sensor_Node_With_Stepper_2_Click%3A Videos Series: * Getting Started with the Home Automation Kit * Home Automation - Weather Clock