In this second video we are changing the control mode from Voltage Mode Control (VMC) to Peak-Current Mode Control (PCMC) by reconfiguring the internal feedback loop of the device using the graphical user interface of the MPLAB® Code Configurator (MCC) SMPS Library. http://www.microchip.com/CIP SMPS Basics: http://ww1.microchip.com/downloads/en/appnotes/01114a.pdf http://ww1.microchip.com/downloads/en/appnotes/01207b.pdf https://www.microsemi.com/document-portal/doc_view/14646-an-7-a-simple-current-sense-technique-eliminating-a-sense-resistor CIP Hybrid Power Controllers: https://www.microchip.com/design-centers/8-bit/development-tools/pic-hardware/cip-hybrid-power-development-board https://www.microchip.com/DevelopmentTools/ProductDetails/DM164147 MPLAB® Code Configurator (MCC) Design Tools: https://www.microchip.com/mplab/mplab-code-configurator Video: https://www.youtube.com/watch?v=JxSSVtTj_fA Many Thanks to https://www.studentcompanion.co.za/ Application Examples: http://ww1.microchip.com/downloads/en/AppNotes/00001978B.pdf http://ww1.microchip.com/downloads/en/appnotes/00002122b.pdf http://ww1.microchip.com/downloads/en/Appnotes/00002321A.pdf Generic Information: https://www.microchip.com/design-centers/intelligent-power