Microchip Technology Inc

Power Debugger

25% Off - Use Coupon Code :ULPSAML2       Expires : 19-Jan-2018
Part Number: ATPOWERDEBUGGER

Power Debugger is a powerful development tool for debugging and programming AVR microcontrollers using UPDI, JTAG, PDI, debugWIRE, aWire, TPI or SPI target interfaces and ARM® Cortex®-M based SAM microcontrollers using JTAG or SWD target interfaces.

In addition the Power Debugger has two independent current sensing channels for measuring and optimizing the power consumption of a design.

Power Debugger also includes a CDC virtual COM port interface as well as Data Gateway Interface channels for streaming application data to the host computer from a SPI, USART, TWI or GPIO source.

The Power Debugger is a CMSIS-DAP compatible debugger which works with Studio 7.0 or later, or other frontend software capable of connecting to a generic CMSIS-DAP unit. The Power Debugger streams power measurements and application debug data to Data Vizualiser for real-time analysis.

Power Debugger kit contents:

  • Main unit with plastic back-plate
  • 2xUSB cable
  • 10-lead squid cable
  • Flat cable (10-pin 50mil connector and 6-pin 100mil connector)
  • Adapter board (20-pin 100mil connector, 6-pin 50mil connector and 10-pin 100mil connector)
  • 20-pin 100mil jumper cable

    • Supports UPDI, JTAG, SWD, PDI, TPI, aWire, SPI and debugWIRE interfaces
    • Two independent measurement channels measuring both voltage and current simultaneously - One high resolution channel that can measure 100nA to 100mA and one lower resolution channel that can measure 1mA to 1A.
    • Adjustable power supply that can be used to power the target application - Voltage adjustable between 1.6V and 5.5V. Can deliver up to 100mA
    • USB feed-through connection for easy measurement of current consumption of USB powered target board
    • 1.62 to 5.5V target operation
    • USB powered
    • Provides both ARM Cortex Debug Connector (10-pin) pin-out and AVR JTAG connector pin-out
    • CDC virtual COM port interface
    • Atmel Data Gateway Interface channels for streaming application data to the host computer from a SPI, USART, TWI or GPIO source
    • Main unit with plastic back-plate
    • 2xUSB cable
    • 10-lead squid cable
    • Flat cable (10-pin 50mil connector and 6-pin 100mil connector)
    • Adapter board (20-pin 100mil connector, 6-pin 50mil connector and 10-pin 100mil connector)
    • 20-pin 100mil jumper cable

Documentation & Software Back To Top



Documents
Last Updated
Size
 
10/18/2017 1:40:34 AM
224KB
9/13/2017 8:54:12 PM
704KB
3/4/2017 12:02:34 PM
12MB
3/1/2017 2:26:43 PM
262KB