The MIC33M356 is a high-efficiency, low-voltage input, 3A Continuous current synchronous step-down Power Module. The Constant-ON-Time (COT)
control architecture with HyperLight Load™ provides very high efficiency at
light loads, while still having ultra-fast transient response.
The I2C interface allows programming the output voltage between 0.6V and 1.28V, with 5 mV resolution (-HAYMP and -FAYMP) or between 0.6V and 3.84V, with 10 mV and 20 mV resolution (-SAYMP). Two different default voltage options (0.9V and 1.0V) are provided so that the application can be started with a safe voltage level and then moved to high performance modes under I2C control.
An open-drain Power Good output facilitates output voltage monitoring and sequencing. If set in shutdown (EN = GND), the MIC33M356 typically draws 1.5 µA, while the output is discharged through 10 ohm pull-down (if the output discharge feature is enabled).
The MIC33M356 pinout is compatible with the MIC33M350, so that applications can be easily converted.
The 2.4V to 5.5V input voltage range, low shutdown and quiescent currents make the MIC33M356 ideal for single-cell Li-Ion battery-powered applications. The 100% duty cycle capability provides low dropout operation, extending operating range in portable systems.
The MIC33M356 is available in a thermally efficient, 24-Lead 3 mm x 4.5 mm x 1.8 mm QFN package, with an operating junction temperature range from -40°C to +125°C
For product comparison, please consider: MIC33M350
ADM00855 are intended to provide a platform allowing customers to easily evaluate the features of the new MIC33M356 3A Power Modules in a buck converter application with output voltage and other settings either set via an I2C serial bus via a GUI interface. These boards are ideal for powering core supply voltages and also high power single-cell Li-ion battery powered applications. The evaluation...
For pricing and availability, contact Microchip Local Sales.