
The MIC33M350 is a high-efficiency, low-voltage input, 3A Continuous current synchronous step-down Power Module. The Constant-ON-Time (COT)
control architecture with HyperLight Load™ provides very high efficiency at
light loads, while still having ultra-fast transient response.
The MIC33M350 output voltage is set by two VSEL (Voltage Selection) pins, up to nine different values. This method eliminates the need for an external feedback resistor divider and improves the output voltage setting accuracy.
The 2.4V to 5.5V input voltage
range, low shutdown and quiescent currents make the MIC33M350 ideal for
single-cell Li-Ion battery-powered applications. The 100% duty cycle capability
provides low dropout operation, extending operating range in portable systems.
The MIC33M350 pinout is
compatible with the MIC33M356 I2C-based programmable regulator version, such
that applications can be easily converted. An open-drain Power Good output is
provided to indicate when the output voltage is within 9% of regulation and
facilitates the interface with an MCU, or power sequencing. If set in shutdown
(EN=GND), the MIC33M350 typically draws 1.5 µA, while the output is discharged
through 10 ohm pull-down.
The MIC33M350 is available in a
thermally efficient, 24 Lead 3mm x 4.5mm x 1.8mm thin QFN package, with
an operating junction temperature range from –40°C to +125°C.
For product comparison, please consider: MIC33M356
ADM00854 are intended to provide a platform allowing customers to easily evaluate the features of the new 3A Power Modules in a buck converter application with adjustable output voltage through pin-strapping using on board jumpers. These boards are ideal for powering core supply voltages and also high power single-cell Li-ion battery powered applications. The evaluation boards also provide a...
For pricing and availability, contact Microchip Local Sales.