Microchip logo
Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

MCP73871

USB/AC Battery Charger with Power Path Management

Status: In Production

Features:

  • Integrated System Load Sharing and Battery Charge Management
  • Simultaneously Power the System and Charge the Li-Ion Battery
  • Integrated Pass Transistors
  • Integrated Current Sense
  • Integrated Reverse Discharge Protection
  • Selectable Input Power Sources: USB Port or AC-DC Wall Adapter
  • Preset High Accuracy Charge Voltage Options:4.10V, 4.20V, 4.35V or 4.40V
  • ±0.5% Regulation Tolerance
  • Maximum 1.8A Total Input Current Control
  • Resistor Programmable Fast Charge Current Control: 50 mA to 1A
  • Resistor Programmable Termination Set Point
  • Selectable USB Input Current Control: Absolute Maximum: 100 mA (L) / 500 mA (H)
  • Automatic Recharge
  • Automatic End-of-Charge Control
  • Safety Timer With Timer Enable/Disable Control
  • 0.1C Preconditioning for Deeply Depleted Cells
  • Battery Cell Temperature Monitor
  • Undervoltage Lockout (UVLO)
  • Low Battery Status Indicator (LBO)
  • Power-Good Status Indicator (PG)
  • Charge Status and Fault Condition Indicators
View More
Overview
Documents
Development Environment
RoHS Information
Buy Now

Device Overview

Summary

The MCP73871 device is a 1A fully integrated linear solution for system load sharing and Li-Ion / Li-Polymer battery charge management with AC-DC wall adapter and USB port power sources selection. It’s also capable of autonomous power source selection between input or battery. The MCP73871 device employs a constant current/constant voltage (CC/CV) charge algorithm with selectable charge termination point. The constant voltage regulation is fixed with four available options: 4.10V, 4.20V, 4.35V, or 4.40V.

Additional Features
    • Integrated System Load Sharing and Battery Charge Management
    • Simultaneously Power the System and Charge the Li-Ion Battery
    • Integrated Pass Transistors
    • Integrated Current Sense
    • Integrated Reverse Discharge Protection
    • Selectable Input Power Sources: USB Port or AC-DC Wall Adapter
    • Preset High Accuracy Charge Voltage Options:4.10V, 4.20V, 4.35V or 4.40V
    • ±0.5% Regulation Tolerance
    • Maximum 1.8A Total Input Current Control
    • Resistor Programmable Fast Charge Current Control: 50 mA to 1A
    • Resistor Programmable Termination Set Point
    • Selectable USB Input Current Control: Absolute Maximum: 100 mA (L) / 500 mA (H)
    • Automatic Recharge
    • Automatic End-of-Charge Control
    • Safety Timer With Timer Enable/Disable Control
    • 0.1C Preconditioning for Deeply Depleted Cells
    • Battery Cell Temperature Monitor
    • Undervoltage Lockout (UVLO)
    • Low Battery Status Indicator (LBO)
    • Power-Good Status Indicator (PG)
    • Charge Status and Fault Condition Indicators
Parametrics
Name
Value
Linear Mode
Yes
# of Cells
1
Int/Ext FET
Int
Vcc Range (V)
4.4 to 6
Voltage Regulation Accuracy (%)
0.5
Temperature Monitor
Yes
Charge Safety Timers
Yes
Max Thermal Regulation
Yes

Documents

Jump to:

Data Sheet

Product Line Card

Brochures

05/16/2011
120KB

Development Environment

  • Demo & Evaluation Boards
  • Application Examples
Demo & Evaluation Boards
MCP73871 Demo Board with Voltage Proportional Current Control (VPCC)
MCP73871 Demo Board with Voltage Proportional Current Control (VPCC) ( MCP73871DM-VPCC )

The MCP73871 Demo Board with Voltage Proportional Current Control is designed to demonstrate Microchip's stand-alone linear Li-Ion battery charger with system power path and load sharing management control solution. The MCP73871 integrates the required elements to meet design challenges when developing new Li-Ion / Li-Polymer batteries powered products.

The MCP73871 Demo Board with...

Learn More
Add To Cart
MCP73871 Li-Ion Charger Evaluation Board
MCP73871 Li-Ion Charger Evaluation Board ( MCP73871EV )

The MCP73871 Evaluation Board is designed to demonstrate Microchip's stand-alone linear Li-Ion battery charger with system power path and load sharing management control solution. The system load is also supported by the Li-Ion battery when input power is disconnected. A number of device options allow the MCP73871 device to be utilized in a variety of applications. Refer to the MCP73871 data sheet...

Learn More
Add To Cart
AVR-IOT WG Evaluation Board
AVR-IOT WG Evaluation Board ( AC164160 )

The AVR-IoT WG development board combines a powerful 8-bit ATmega4808 MCU, an ATECC608A CryptoAuthentication™ secure element IC and the fully certified ATWINC1510 Wi-Fi® network controller - which provides the most simple and effective way to connect your embedded application to Google’s Cloud IoT core platform. The board also includes an on-board debugger, and requires...

Learn More
Add To Cart

RoHS Information

Part Number
Device Weight (g)
Shipping Weight (Kg)
Lead Count
Package Type
Package Width
Solder Composition
JEDEC Indicator
RoHS
China EFUP
MCP73871-1AAI/ML
0.043100
0.076923
20
QFN
4x4x0.9mm
Matte Tin
e3
MCP73871-1CAI/ML
0.043100
0.076923
20
QFN
4x4x0.9mm
Matte Tin
e3
MCP73871T-1AAI/ML
0.043100
0.212121
20
QFN
4x4x0.9mm
Matte Tin
e3
MCP73871-1CCI/ML
0.043100
0.076923
20
QFN
4x4x0.9mm
Matte Tin
e3
MCP73871T-1CCI/ML
0.043100
0.212121
20
QFN
4x4x0.9mm
Matte Tin
e3
MCP73871-4CCI/ML
0.043100
0.076923
20
QFN
4x4x0.9mm
Matte Tin
e3
MCP73871T-4CAI/ML
0.043100
0.212121
20
QFN
4x4x0.9mm
Matte Tin
e3
MCP73871T-4CCI/ML
0.043100
0.212121
20
QFN
4x4x0.9mm
Matte Tin
e3
MCP73871T-1CAI/ML
0.043100
0.212121
20
QFN
4x4x0.9mm
Matte Tin
e3
MCP73871-2CCI/ML
0.043100
0.076923
20
QFN
4x4x0.9mm
Matte Tin
e3
MCP73871T-2CCI/ML
0.043100
0.212121
20
QFN
4x4x0.9mm
Matte Tin
e3
MCP73871-3CCI/ML
0.043100
0.076923
20
QFN
4x4x0.9mm
Matte Tin
e3
MCP73871-2CAI/ML
0.043100
0.076923
20
QFN
4x4x0.9mm
Matte Tin
e3
MCP73871T-2CAI/ML
0.043100
0.212121
20
QFN
4x4x0.9mm
Matte Tin
e3
MCP73871-2AAI/ML
0.043100
0.076923
20
QFN
4x4x0.9mm
Matte Tin
e3
MCP73871T-2AAI/ML
0.043100
0.212121
20
QFN
4x4x0.9mm
Matte Tin
e3
MCP73871-3CAI/ML
0.043100
0.076923
20
QFN
4x4x0.9mm
Matte Tin
e3
MCP73871-4CAI/ML
0.043100
0.076923
20
QFN
4x4x0.9mm
Matte Tin
e3
To see a complete listing of RoHS data for this device, please Click here
Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.

Buy

Grid
View
Table
View
Filter:
Apply
Clear
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy