This video introduces ARM Cortex M4 based SAM E54 Xplained Pro Evaluation Kit using MPLAB Code Configurator (MCC). The application reads room temperature from the I/O1 Xplained Pro Extension Kit every 500 milliseconds, displaying it on a serial console and toggling an LED. The sampling interval varies based on each press of the switch SW0. Additionally, the project showcases temperature data using I/O-1 Xplained pro evaluation kit. Links: · SAM E54 Xplained Pro Evaluation Kit page https://www.microchip.com/en-us/development-tool/atsame54-xpro · Microchip's Microcontrollers and Microprocessors product page https://www.microchip.com/en-us/products/microcontrollers-and-microprocessors · MPLAB Reference Apps GitHub https://github.com/Microchip-MPLAB-Harmony/reference_apps · MPLAB Reference Apps Gitee https://gitee.com/Microchip-MPLAB-Harmony/reference_apps ·"Reference Applications for SAM MCU Family: https://github.com/Microchip-MPLAB-Harmony/reference_apps_sam_mcu · Demo Link: https://github.com/Microchip-MPLAB-Harmony/reference_apps_sam_mcu/tree/master/apps/sam_e54_xpro/same54_getting_started · Demo User Guide: https://onlinedocs.microchip.com/oxy/GUID-CE82555C-559F-4226-A6DD-961D6B9737DE-en-US-1/GUID-571D07A4-23B1-46B2-974F-F1653CA601BD.html" · MPLAB® X IDE Essentials - 01: Installation and Ecosystem https://www.youtube.com/watch?v=WSePR0jIeKI · How to Set up the Tools Required to Get Started with MPLAB® Harmony v3 and MCC https://youtu.be/0rNFSlsVwVw Timestamps: 0:00 – Introduction 0:13 – Prerequisite - Software 0:28 – Prerequisite - Hardware 0:50 – Project Scope and Steps 1:25 – Step 1: Setup the Hardware 1:29 – Step 2: Download the project from the kit page 1:43 – Step 3: Open the project and launch MCC 1:58 – Step 4: Check the peripheral configurations in MCC 2:57 – Step 5: Review Application Code 3:24 – Step 6: Compile the project and see the Output 4:12 – More application demos on SAM E54 Xplained Pro Evaluation Kit 4:25 – More information on MPLAB Harmony