Digilent Inc.

chipKIT™ Max32™ by Digilent (410-202) is an easy-to-use platform for developing advanced applications. The chipKIT platform uses a modified version of the original Arduino^® IDE for compatibility with existing code examples, tutorials and resources. Pin-compatible with many Arduino shields that can operate at 3.3V.

• PIC32MX795F512L processor
• 512K Flash, 128K RAM
• Up to 80 MHz operating speed
• USB 2.0 OTG controller
• 10/100 Ethernet MAC
• Dual CAN controllers
• 83 available I/O lines
• USB or externally powered
• USB cable required for programming (not included)

The chipKIT Basic I/O Shield (Digilent 410-216) adds a variety of useful I/O devices to the chipKIT Uno32 or the chipKIT Max32. It provides simple I/O such as buttons, switches and LEDs, as well as more complex devices such as an I2C EEPROM, an I2C temperature sensor, and a 128x32 pixel organic LED graphic display.

• 128x32 OLED Graphic Display
• Digital temperature sensor
• 256kbit EEPROM
• 4 switches
• 4 push buttons
• 8 LEDS
• 4 Open drain transistor outputs
• Analog potentiometer

Note: Requires chipKIT Uno32 (TDGL002), chipKIT Max32 (TDGL003), chipKIT uC32 (TDGL017), or chipKIT WF32 (TDGL021).

Digilent is a trusted third-party tool provider.

The chipKIT Network Shield (Digilent 410-211) expands the capabilities of the chipKIT Max32 to take advantage of all the advanced features of the PIC32MX795 MCU. It adds 10/100 Ethernet, USB and CAN communications plus additional features.

• 10/100 Ethernet
• USB Host, Device, OTG
• Dual CAN transceivers
• Dual I2C connectors
• 245kbit EEPROM
• 32.768 KHz oscillator for RTCC

The chipKIT™ Pro MX7™ (Digilent 410-296) development board is based on the PIC32MX795F512L MCU. It is compatible with Digilent's line of Pmod™ peripheral modules and is suitable for use with the Microchip MPLAB^® IDE. This board is also compatible with the chipKIT™ platform's MPIDE development environment. The chipKIT platform and MPIDE are part of a PIC32-based system compatible with many existing Arduino^® code examples, reference materials, and other resources.

Includes a built in programmer/debugger compatible with MPLAB. The kit contains everything needed to start developing embedded applications using either the MPLAB IDE or the MPIDE.

• PIC32MX795F512L MCU
• 512K Flash, 128K RAM
• USB 2.0 Full Speed On-The-Go [OTG]
• 10/100 Ethernet
• Two CAN controllers
• 52 I/O pins
• 16 analog inputs
• chipKIT bootloader installed

This low-priced item is not eligible for academic discount.

Digilent is a trusted Third-Party Tool provider.

The Digilent PmodRTCC Peripheral Module (Digilent 410-218) is a Real-Time Clock/Calendar powered by Microchip's MCP79410. It is compatible with Digilent's PIC32-based Cerebot development boards (TDGL008, TDGL009, TDGL010), and can be easily connected to any system using standard IDC connectors and cables. An I²C™ interface is used to communicate with the module. The PmodRTCC provides two available alarms, 128 bytes EEPROM and 64 bytes SRAM. The multi-function pin can be accessed via a two pin header. The product includes a coin-cell battery holder.

This low-priced item is not eligible for academic discount.


Digilent is a trusted third-party tool provider.

The Digilent PmodOLED Peripheral Module (Digilent 410-222) is perfect for embedded applications requiring small, complex visual output. It is compatible with Digilent's PIC32-based Cerebot development boards (TDGL008, TDGL009, TDGL010), and can be easily connected to any system using standard IDC connectors and cables. An SPI interface is used to communicate with module. The 128 x 32 pixel organic LED (OLED) graphic display panel uses the Solomon Systech SSD1306 controller. A library of character and graphic functions is available by download (with source code in C), along with sample MPLAB^® IDE projects.

This low-priced item is not eligible for academic discount.


Digilent is a trusted third-party tool provider.

The chipKIT™ PGM by Digilent (410-242) is a simple, low-cost module that supports in-system programming and debugging of applications written for PIC^® MCU-based microcontroller boards such as the chipKIT™ and Cerebot boards.

The chipKIT PGM is designed to work with the MPLAB^® v8 and MPLAB^® X IDE. This allows the chipKIT boards, for example, to be used as a more traditional microcontroller development platform.

• Supports Microchip`s 3.3V devices only
• Intended for use with the chipKIT Max32™, Uno32™, uC32™, and the Cerebot MX3cK
• Includes USB A-Mini B cable and a right-angle 6 pin header

chipKIT™ uC32 by Digilent (410-254)  is an easy-to-use platform for developing microcontroller-based applications. ChipKIT uses a modified version of the original Arduino™ IDE for compatibility with existing code examples, tutorials and resources. Pin-compatible with many Arduino shields that can operate at 3.3V.

• PIC32M340F512H processor
• 512K Flash, 32K RAM
• Up to 80 MHz operating speed
• 42 available I/O lines
• USB or externally powered
• USB cable required for programming (not included)

The JTAG-USB (Digilent 250-003) cable allows you to use your PC to connect to a JTAG scan chain or to access an SPI interface on a board equipped with the appropriate 6-pin header. In this way, you can program devices on Digilent programmable logic boards using the Digilent Adept Suite and MCHP Serial Flash Programming Utility (SFPU) for CPG products.

Note: This is a special-order cable for use with the Synopsys Metaware IDE debugger and MCHP Serial Flash Programming Utility for CPG products.


Digilent is a trusted third-party tool provider.

The chipKIT™ Motor Shield (Digilent 410-262) is an expansion board for use with the chipKIT Uno32™ (TDGL002) and chipKIT uC32™ (TDGL017). It provides additional circuitry and connectors for the Uno32 and uC32 to drive various motors types.

The chipKIT Motor Shield is designed to drive DC motors, servo motors, and stepper motors. It also provides additional I/O via an I²C™ I/O extender. Features include:

• Two DC motor driver channels, accessible with either a JST 6-pin connector or a terminal block
• Two DC motor encoder input signals for each DC motor channel
• Four servo motor channels
• I²C General purpose I/O expander with four LEDs, two push buttons and two user-settable jumpers
• 1 4-wire unipolar stepper motor channel
• Standard chipKIT Shield connectors

The chipKIT™ WF32™ by Digilent (410-273)is an easy-to-use platform for developing Wi-Fi^® applications. As with other chipKIT boards, it uses a modified version of the original Arduino^® IDE for compatibility with existing code examples, tutorials and resources. Also compatible with MPLAB^® X IDE.

The WF32 includes several peripherals on board, including Wi-Fi radio module, USB OTG (host or device) interface, microSD™ card slot, buttons, LEDs, potentiometer and lots of extra I/O. A full-featured HTML server application is available by download. Can be powered by USB, or an external power supply.

• PIC32MX695F512L processor with 512K Flash, 32K RAM
• Up to 80 MHz operating speed
• MRF24WG0MA Wi-Fi module
• microSD card connector
• USB 2.0 OTG interface
• Four user LEDs, two buttons
• 42 available I/O lines

The chipKIT™ Wi-Fire board enables rapid prototyping with Microchip’s latest PIC32MZ architecture and Imagination Technologies' Flow Cloud Internet connectivity development software. Features include:

• Microchip PIC32MZ Processor: PIC32MZ2048EFG100
• Much faster than its WF32™ counterpart with 200 MHz operation speed, 2 MB of Flash, and 50 MHz SPI
• Microchip MRF24WG0MA Wi-Fi^® module
• USB 2.0 Full-Speed / Hi-Speed OTG controller with A and micro-AB connectors
• Micro SD card connector
• High efficiency 3.3V switching power supply for low-power operation
• Supported by Imagination Technologies' Flow Cloud Software for your IoT projects
• Fully supported by MPIDE

 Digilent is a trusted third-party tool provider.

The chipKIT™ Cmod (Digilent 410-269) is a development board in the chipKIT Platform line of tools from Digilent. It combines a Microchip® PIC32MX150F128D microcontroller with a convenient 600-mil, 40-pin DIP package and two Digilent Pmod connectors. This Cmod board is ideally suited for breadboards or other prototype circuit designs where the use of small surface mount packages is impractical. This little board takes advantage of the powerful PIC32MX150F128D microcontroller. which features a 32-bit MIPS processor core running at 40 MHz, 128K of flash memory, and 32K of SRAM data memory.

The board provides everything you need to start developing embedded applications using any of the chipKIT-compatible IDEs, but in addition, the chipKIT Cmod is also fully compatible with Microchip's MPLAB® X IDE. Note, however, that to develop embedded applications using MPLAB X, a separate device programmer/debugger, such as the Digilent chipKIT PGM (TDGL015) or the Microchip PICkit™3 Programmer (PG164130) is required.

Features:

• PIC32MX1xx
• 128KB Flash
• 32KB RAM
• 50 MHz operating speed
• PPS, two SPI, two I2C, and two UART connectors
• 13 channel 10-bit ADC
• 33 available I/O pins
• 3.3V operating voltage
• 13 analog inputs
• Two 12-pin Pmod connectors
• Convenient 600-mil 2x20-pin DIP package
• Two user LEDs
• Programmable with MPIDE
• Also programmable with MPLAB IDE (with the addition of the PICkit 3 in-system programmer/debugger)

The chipKIT™ Pmod Shield (Digilent Inc. 410-229) is an input/output expansion board for use with the chipKIT uC32 (TDGL017) or chipKIT Uno32 (now discontinued), as it has the same form factor. With five 2x6 Digilent Pmod connectors, access to available I/O connectors on the base boards, and connectivity to the supported I2C bus, this Pmod Shield provides all the additional circuitry and connections to allow Digilent Pmods to be used with these two chipKIT base boards.

Features:

• Compatible with the chipKIT uC32 (TDGL017) and chipKIT Uno32 (now discontinued)
• Provides access to Digilent's full line of peripheral modules (Pmods)
• Five 2x6-pin Digilent Pmod connectors
• One 6-pin SPI connector
• One I2C daisy-chain connector