Log in to myMicrochip to access tools and benefits. Sign up in just one minute.
Maximize Your Experience: Reap the Personalized Advantages by Completing Your Profile to Its Fullest. Update Here
Stay in the loop with the latest from Microchip. Update your profile while you are at it. Update Here
Complete your profile to access more resources. Update Here
true
New Products Q2 2026
New Products at a Glance
- New Releases: 15 Products and 2 Reference designs
- Product Categories: 8-bit MCUs, Digital Signal Controllers (DSCs), Operational Amplifiers (Op Amps), Clock and Timing, Discrete Solutions, FPGAs, Networking, Memory, Power Management, Security, Sensors and Motor Drive, Wireless Connectivity and Reference Designs
- Markets: Automotive, Industrial Automation, Aerospace and Defense, Medical, Consumer Electronics, Smart Home, Data Center and Computing, Communications, Robotics, IoT Infrastructure and Smart Appliances
- Focus Areas: Low-Power Embedded Processing, Real-Time Motor Control, Precision Analog, Edge AI, Single Pair Ethernet, Embedded Memory, Power Management, Hardware Security, Magnet-less Position Sensing, Bluetooth® LE, Thread® and Wireless Motor Control
Microcontroller (MCU) Products
AVR32LA32, AVR32LA28, AVR32LA20, AVR32LA14 AVR16LA32, AVR16LA28, AVR16LA20, AVR16LA14: 8-bit MCUs
1.62V MCUs Revolutionizing Touch Interfaces in Low-Voltage and Low-Power Applications
Small footprint MCUs designed for low-voltage and low-power edge nodes, housekeeping, system monitoring and Human-Machine Interface (HMI), found in automotive, industrial and data center and computing. Brings true 1.8V operation and the latest series of Peripheral Touch Controller (PTC) hardware.
Features:
- 1.62V to 5.5V supply voltage range
- 60 nA typical and 200 nA maximum in standby mode with full SRAM retention
- PTC with enhanced moisture robustness and water tolerance, 2x Signal-to-Noise Ratio (SNR), 4x faster response time
- Up to 32 pins and 27 touch channels
- Program and Debug Interface Disable (PDID)
- Touch library support in MPLAB® Code Configurator (MCC)
Markets and applications:
- Wearable devices
- Consumer electronics
- Home automation
- Industrial and medical
- Battery-powered sensors
- Automotive HMI
- Data center and Computation
See AVR32LA/28/20/14 Microcontrollers Datasheet →
dsPIC33CK Value Line Digital Signal Controllers (DSCs)
Deterministic Real-Time Control for Cost-Optimized Designs: Motor Control, Advanced Sensing and Capacitive Touch, Starting at $0.51
Essential performance at consistent pricing regardless of purchase volume.
Features:
- Essential Real‑Time Performance: Up to 100 MHz deterministic control, high‑resolution PWMs and 12‑bit ADC for cost-sensitive applications
- Integrated Design That Lowers BOM: Balanced on‑chip peripherals and high-performance core reduce external components and overall system cost
- Scalable Platform With Seamless Reuse: Scalable memory options from 32 KB to 256 KB and dsPIC33CK Digital Signal Controller (DSC) compatibility enable software reuse and easy migration
- Accelerated Development: The MPLAB® Development Ecosystem and low‑cost Curiosity Nano development board help accelerate design and development
Markets and applications:
- Target Segments
- Automotive, Industrial, Consumer and Medical
- Target Applications
- Motor Control: Fans, compressors, pumps, actuators and Field-Oriented Control (FOC)
- Advanced Sensing: Current, fluid level, ultrasonic, exhaust, position, pressure and rain sensing
- Capacitive Touch: Steering wheel touch buttons, dashboard control and overhead consoles
See dsPIC33CK256MC006 Value Line DSCs Datasheet →
Amplifiers and Linear Integrated Circuits (ICs)
MCP60711/1U/2/4: 10 MHz Precision Op Amps
Precision Op Amps Engineered for Ultimate Measurement Accuracy- Combining Low Offset, Low Noise and High Bandwidth for Precision Applications
Single-, dual- and quad precision Op Amps with an integrated Electromagnetic Interface (EMI) Filter.
Features:
- Trimmed Voltage Offset
- Low voltage offset, 180 µV maximum
- High Common-Mode Rejection Ratio (CMRR) and Power Supply Rejection Ratio (PSRR), approximately 80 dB minimum
- Low Quiescent Current
- Operating Voltage from 2.2V to 5.5V
- 720 µA typical supply current
- Low Noise
- 5.4 nV/√Hz at 100 kHz
- Enhanced EMI Rejection
- EMIRR of 71 dB at 1.8 GHz
- AEC-Q100 Grade 1 qualification
Markets and applications:
- Industrial control
- Medical instrumentation
- Test and measurement
- Active filters
- Analog-to-Digital Converter (ADC) drivers
- Automotive systems (AEC-Q100 qualified)
See MCP6071x Datasheet →
MCP60811/1U/2/4: 25 MHz Precision Op Amps
Precision Op Amps Engineered for Ultimate Measurement Accuracy - Combining Low Offset, Low Noise and High Bandwidth for Precision Applications
Single-, dual- and quad-channel precision Op Amps with Integrated EMI Filter.
Features:
- Trimmed Voltage Offset
- Low voltage offset, 180 µV maximum
- High CMRR/PSRR, approximately 80 dB minimum
- Low quiescent current
- Operating voltage from 2.2V to 5.5V
- 2.5 mA typical supply current
- Low Noise
- 3.9 nV/√Hz at 100 kHz
- Enhanced EMI Rejection
- EMIRR of 85 dB at 2.4 GHz
- AEC-Q100 Grade 1 Qualification
Markets and applications:
- Industrial control
- Medical instrumentation
- Test and measurement
- Active filters
- ADC drivers
- Automotive systems (AEC-Q100 qualified)
See MCP6081x Datasheet →
Clock and Timing Components
SY75707TWL-TR, SY75712TWL-TR and SY75714TWL-TR
1.2V LVCMOS Buffers Enable 3.3V to 1.2V Clock Translation for FPGA and SoC Applications
This ultra-compact, low-jitter buffer is well suited for translating differential or single-ended clock and data signals in space-constrained, low-power and cost-sensitive applications.
Features:
- Differential HCSL/LVPECL/LVDS or single-ended input
- Two to four LVCMOS outputs
- SY75707: 1.8V to 3.3V VDDIN to 1.2V to 1.8V VDDO power
- SY75712/14: 1.2V to 1.8V VDD power rail
- Ultra-low additive jitter 32 fs (typical) in 12 kHz to 20 MHz band at 156.25 MHz
- 250 MHz maximum frequency
Markets and applications:
- The ultra-low additive jitter buffer provides signal integrity for the industrial, communications and data center markets.
See SY75707, SY75712 and SY75714 Datasheet →
View SY75707, SY75712 and SY75714 Products Page →
Discrete Active Components
JANPTX1N5555UJ through JANPTX1N5558UG, JANPTX1N5629AUJ through JANPTX1N5665AUG, JANPTX1N5907UG and JANPTX1N5907UJ: High-Reliability Discrete Solutions
Industry First: Microchip Debuts DLA-Qualified Transient Voltage Suppressor (TVS) Producs for MIL-PRF-19500 Appendix J - Learn More
Non-hermetic series of unidirectional TVS devices qualified per MIL-PRF-19500/716.
Features:
- Unidirectional TVS with surface-mount packages
- Moisture Sensitivity Level (MSL) 1 rating with no dry pack required per IPC/JEDEC J-STD-020
- Suppresses transients up to 1,500W at 10/1000 µs (micro-seconds)
- Clamps transients in less than 100 ps (picoseconds)
- Working voltage (VWM) range from 5V to 175V
Sample applications:
- Inductive switching environments
- Airborne avionics
- Electrical systems requiring low voltage
See JAN(P)TX Datasheet →
View JANPTX1N5646AUJ Products Page →
FPGAs and PLDs
CoreVectorBlox: FPGA Design Tools Edge AI
Run Larger, Higher-Resolution AI Models Within Fixed Edge Memory Limits with VectorBlox™ 3.0
Combines structured and unstructured compression to reduce memory footprint and support edge AI deployment within fixed memory constraints.
Features:
- VBX 3.0 introduces structured and unstructured model compression
- 1.3x–1.6x higher performance with less than 1.1% accuracy loss
- ~20% higher performance and approximately 20% lower power compared to VBX 2.0 (no compression)
- Improved AI-per-watt through reduced compute and Double Data Rate (DDR) bandwidth
- Enhanced CoreVectorBlox™ IP efficiency with lower Lookup Table (LUT) and DDR utilitzation compared to VBX 2.0
- Reference design power below 6W
Markets and applications:
- Industrial vision
- Robotics
- Surveillance
- Aerospace and defense
- Medical imaging
- Edge AI and smart cameras
See VectorBlox-SDK GitHub Page →
View VectorBlox™ Accelerator Software Development Kit (SDK) for PolarFire® FPGAs Page →
High-Speed Networking Components
LAN8660, LAN8661, LAN8662: Single Pair Ethernet
10BASE-T1S Endpoints with Remote Control Protocol (RCP) for Smart, Centralized Edge Control
These 10BASE-T1S devices integrate sensors and actuators directly into a T1S network, helping reduce the need for gateways or additional software programming required. These devices are available in versions optimized for control (LAN8660), lighting (LAN8661) and audio (LAN8662).
Features:
- Standards-based RCP and Scalable service-Oriented Middleware over IP (SOME/IP)
- Time synchronization with generalized Precision Time Protocol (gPTP)
- Digital input and output pins with multiple serial communication interfaces, including Inter-Integrated Circuit (I2C), Serial Peripheral Interface (SPI) and Universal Asynchronous Receiver Transmitter (UART)
- AEC-Q100 (-40°C to +125°C) and ISO26262 Functional Safety Qualified
Markets and applications:
- Automotive interior/exterior lighting
- Distance, pressure, temperature, speed, acceleration and vibration monitoring
- Touch and button sensors
- Motor and pump regulation
- Intercom and seat-to-seat communication
- Remote displays
- Voltage or current measurement
See LAN866x Datasheet is in the Secure Document Extranet (SDE) →
View LAN8660, LAN8661 and LAN8662 Products Page →
Memory Products
25CS080 and 25CS160: Serial EEPROM
Next-Generation SPI EEPROM With Advanced Features
8 Kb and 16 Kb Serial SPI EEPROM with Enhanced Feature Set.
Features:
- Identification and Traceability
- Factory-programmed 128-bit serial number
- Lockable ID Page
- Manufacturer ID
- Data Integrity and Protection
- Built-in Error Correcting Code (ECC)
- More than 4 Million erase/write cycles
- Enhanced software write protection
- Under-Voltage Lockout (UVLO)
- AEC Q100 Grade 0 (-40 to +150°C) Qualified
- Backwards compatible to legacy Atmel and Microchip EEPROMs
Markets and applications:
- Power, energy and electrical infrastructure
- Industrial automation and control
- Automotive and e-mobility
- Communications, networking and computing
- Consumer, smart building and IoT
- Medical and healthcare equipment
See 25CS080 and 25CS160 Datasheet →
View 25CS080 and 25CS160 Product Page →
EV60D49A, EV94T74A, EV34X05A and EV08L40A: Memory Xplorer Embedded Memory Evaluation Platform
New EEPROM Dev Tools Lowers Cost
Redesigned development tool hardware helps reduce cost compared to the previous solution.
Features:
- Test features such as write protect, software addressing, serial numbers and Media Access control (MAC) addresses
- Evaluate variable features including voltage range and operating frequencies
- Support EEPROM devices with the enhanced feature set in the 24CSxxx and 25CSxxx series
- Generate, write and load Hexadecimal (HEX) files or read and erase memory
- Software and user guides available for download
Explore EV60D49A Base Board, EV94T74A I2C Daughterboard, EV34X05A SPI Daughterboard and EV08L40A Single-Wire Daughterboards and Documentation →
Power Management
MCP16503: PMIC
Cost-effective Board for Evaluating and Adopting 32-bit dsPIC33A Digital Signal Controllers (DSCs)
Advanced Power Management IC for MPUs.
Features:
- Resistor-selectable output voltage for each channel
- High-accuracy output voltage designed to meet MPU core supply requirements
- Reduces board area and component count by up to 50% compared to discrete solutions
- Provides system power with six power rails, including four buck converters (1A) and two LDOs ared at 300 mA
- 32-pin VQFN package
Markets and applications:
- High-performance, general-purpose MPUs
- μC/μP, FPGA and Digital Signal Processor (DSP) power
- Industrial computing, data center and high-performance Artificial Intelligence (AI) applications
See MCP16503 Datasheet →
View MCP16503 Product Page →
Security Products
TA101 TrustFLEX (TA101-TFLXTLS): Secure Authentication ICs
Add Hardware Root of Trust Into Existing Public Key Infrastructure (PKI) and Cloud Environments
Factory-provisioned companion Hardware Security Module (HSM) with hardware authentication next to any MCU or MPU helping support Cyber Resilience Act (CRA) and IEC 62443 compliance.
Features:
- Drop-in hardware authentication for customer-supported PKI and cloud infrastructures
- Microchip in-factory provisioning within secure facilities prevents exposure of customer secrets
- Configurable use-case examples including secure boot, firmware updates, Transport Layer Security (TLS)/PKI, Qi 1.3 and multi-key access)
- Helps reduce development time and simplify documentation
- Hardware configurator for streamlined prototyping and production
- Companion device for MCUs and MPUs
- Designed for customer with existing security SaaS infrastructure
- RSA, ECC, SHA and AES cryptographic algorithms
Markets and applications:
- Industrial automation, IoT infrastructure and connected medical equipment requiring IEC 62443 and CRA compliance
- Secure boot, authenticated firmware updates and TLS/PKI network authentication
- Qi 1.3 wireless charging authentication and multi-key access management
- Media Access Control Security (MACsec) for automotive and industrial
TA101 TrustMANAGER (TA101-TMNGTLS): Secure Authentication ICs
Advanced Hardware Security With Streamlined Lifecycle Management
Companion HSM IC with managed in-field Firmware Over-the-Air (FOTA) provisioning via keySTREAM, helping support IoT security for MCU and MPU applications requiring CRA and IEC 62443 compliance.
Features:
- Remote and in-field provisioning, configuration and lifecycle credential management via Kudelski IoT keySTREAM
- PKI, code signing and FOTA without requiring in-house product security infrastructure
- Designed to support CRA and IEC 62443 requirements
- Companion devices for MCUs and MPUs
- Streamlined integration with cloud-managed hardware-rooted trust architectures
- Designed for customers with limited security infrastructure
- RSA, ECC, SHA and AES cryptographic algorithms
Markets and applications:
- Industrial automation, IoT infrastructure and connected medical equipment requiring IEC 62443 and CRA compliance
- Automotive in-vehicle networking and Software-Defined Vehicle (SDV) architectures and Electric Vehicle (EV) charging security
- Remote PKI generation, fleet and credential management, configuration, code signing and secure firmware updates (FOTA)
Sensors and Motor Drive Components
LX34312: Inductive Position Sensors
High Accuracy Magnetless Position Sensing for Supply Resilience and Flexible Product Design
2 kHz sample rate sensor for position sensing in applications requiring high accuracy, functional safety, flexible sensor design and strong supply resiliency.
Features:
- 2 kHz or lower sample rate sensor for low-speed applications
- 22 fully customizable calibration segments
- Three times the gain of the LX3302A, enabling:
- Smaller sensors
- Larger airgaps
- Greater flexibility in air-gap variation
- SENT 2016-capable
- Enhanced emissions performance
- Dual-fab supply in Asia and the U.S.
- ISO 26262 ASIL C Compliant
- AEC Q100 Grade 0 (-40°C to +150°C)
- Standard 14-pin TSSOP package
Markets and applications:
- Actuators
- Cooling valves
- Assembly-line rail and laner positions
- Garage door position sensing
- Brake and accelerator pedals
- Clutch position sensing
- Park lock sensors
- Steering angle sensing
See LX34312 Datasheet is in the Secure Document Extranet (SDE) →
View LX34312 Product Page →
Wireless Connectivity
PIC32CX2051BZ66048: BLE6.0, Thread 1.3.0
Highly Integrated Multiprotocol Wireless Systems-on-Chip (SoCs)
48-pin Bluetooth® Low Energy (Bluetooth LE) and Thread® wireless MCU with compact size, rich peripherals and secure boot support.
Features:
- Certified against Bluetooth Core 6.0
- Support for 802.15.4 protocols including Thread and proprietary protocols
- 128 MHz ARM® Cortex® processor
- Optimized for compact wireless product design
- Extensive peripheral options for wireless MCU applications, including:
- Controller Area Network (CAN)
- Touch and graphics
- Motor control with Pulse-Width Modulation (PWM) and feedback encoder support
- General-Purpose Input/Output (GPIO)
- Large memory space for complex applications:
- 2 MB Flash memory and 512 KB RAM
- Operating temperature up to 125C (AEC-Q100 Grade 1 qualified)
Markets and applications:
- Thermostats
- Remote control panels
- Home appliances
- Industrial equipment
- Portable medical devices
See PIC32CX-BZ6 and PIC32WM-BZ6 Microcontrollers Datasheet →
View PIC32CX2051BZ66048 Microcontrollers →
Reference Designs
Bluetooth LE Servo Motor Control Demonstration
Enable the Servo Motor Control and Bluetooth LE Connection within a Single MCU
Control a servo motor using a Bluetooth LE MCU.
Features:
- Enables wireless servo motor control from a mobile phone app using Bluetooth LE
- PIC32-BZ6 wireless MCU drives the servo motor through PWM output
- Helps simplify Bluetooth LE integration for motorized systems
- Helps reduce development time with ready-to-use firmware and hardware configuration
- Provides a platform for evaluating wireless motor control
Markets and applications:
- Smart home
- Smart appliance
- Medical
- Robotics
Microchip Components:
Bluetooth LE Brushed DC Motor Control Demonstration
Monitor and Control a Brushed DC Motor with Bluetooth LE MCU
Reference Design Connecting Low-Power Display to a Wireless MCU.
Features:
- Monitor and control a brushed DC motor wirelessly via Bluetooth LE and a mobile phone app
- Build the motor control loop with Quadrature Encoder Interface (QEI) and PWM output
- Ready-to-use hardware and software for evaluation
- Helps Simplify wireless motor control integration
- Helps reduce development time for proof-of-concept projects
Markets and applications:
- Smart home
- Smart appliance
- Medical
- Robotics