Log in to myMicrochip to access tools and benefits. Sign up in just one minute.
Maximize Your Experience: Reap the Personalized Advantages by Completing Your Profile to Its Fullest. Update Here
Stay in the loop with the latest from Microchip. Update your profile while you are at it. Update Here
Complete your profile to access more resources. Update Here
Overview
This Leadshine model 42HS03 stepper motor can be used with the PICDEM MCSM development board (DM330022 and DM330022-1). Featuring 8 leads, it can be configured for unipolar or bipolar operation and has a step angle of 1.8°.
- Step angle of 1.8°
- Step angle accuracy of +/-5%
- Temperature rise of 80°C (maximum)
- Rated for -10°C to +50°C operation
- Motor length is 1.89" (48mm)
- Holding torque is 66.55Nm (bipolar) and 48.14Nm (unipolar)
- Phase Current is 1.4A (bipolar parallel), 0.7A (bipolar series) and 1.0A (unipolar)
- Rotor Inertia is 0.001164 Oz/sec2 (82 g/cm)
- Detent Torque is 2.84Oz/in (204 g/cm)
- Weight is 11.99Oz (0.34kG)
Cannot load image!
Documentation
Filter by Document Type
Search Documentation
|
Title
|
Document Category
|
|||
|---|---|---|---|---|
| AC300024 - Stepper Motor Datasheet | User Guide | Download |
| Tool Details |
|---|
The Microchip dsPICDEM MCSM Development Board is targeted to control both unipolar and bipolar stepper motors in open-loop or close-loop (current control) mode. The hardware is designed in such a way that no hardware changes are necessary for 8-, 6- or 4-wire stepper motors in either bipolar or unipolar configurations.
|
The Microchip dsPICDEM MCSM Development Board is targeted to control both unipolar and bipolar stepper motors in open-loop or close-loop (current control) mode. The hardware is designed in such a way that no hardware changes are necessary for 8-, 6- or 4-wire stepper motors in either bipolar or unipolar configurations. An updated version of this board, DM330022-1, is available which includes a dsPIC33CK64MP105 PIM.
|