Status: End of Life
The TC1035 is a single CMOS operational amplifier for low-power applications. It has a typical operating supply current of 6 µA, which is constant over the supply voltage range of 1.8 to 5.5V. The op amp has a rail-to-rail input and output which allows operation at low supply voltages with large input and output signal swings. An active low shutdown input, SHDN, disables the op amp, placing its output in a high-impedance state. The TC1035 draws less than 0.1 µA when the shutdown mode is active. Packaged in a 6-pin SOT-23A, this single operational amplifier is ideal for applications requiring high integration, small size and low power.
Please consider this device MCP6421
The MCP6SX2 PGA Photodiode PICtail™ Demo Board features a PNZ334 photodiode, MCP6001U op amp, and MCP6S22 and MCP6S92 Programmable Gain Amplifiers (PGA).
The op amp converts the photodiode’s output current to voltage (transimpedance amplifier). Its output goes to one of the PGA’s inputs. The other PGA input is available for any other desired source. This opens the...
The MCP6SX2 PGA Thermistor PICtail Demo Board features the MCP6S22 and MCP6S92 Programmable Gain Amplifiers (PGA). These devices help:
This board supports the capacitive humidity sensor application note AN1016. It measures the capacitance of a relative humidity sensor plugged into the board. The on-board microcontroller sends the measured and calculated relative humidity (RH) to a PC for display.
The board can also measure small capacitors in different ranges of values using a dual slope integration method. The...
This Blank PCB allows the system designer to quickly evaluate the operation of Microchip Technology’s Voltage Supervisors and Voltage Detectors in the SOT-23-5 (5-pin) and SOT-23-6 (6-pin) packages. This PCB supports many Microchip device families, including the Nonvolitile Digital Potentiometer and PIC10F2xx devices.
Rohs data is currently unavailable.
For pricing and availability, contact Microchip Local Sales.