Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

SST25WF080

Status: End of Life

Features:

  • Single Voltage Read and Write Operations – 1.65-1.95V • Serial Interface Architecture – SPI Compatible: Mode 0 and Mode 3 • High Speed Clock Frequency – 75 MHz • Superior Reliability – Endurance: 100,000 Cycles (typical) – Greater than 100 years Data Retention • Ultra-Low Power Consumption: – Active Read Current: 2 mA (typical @ 33 MHz) – Standby Current: 5 µA (typical) • Flexible Erase Capability – Uniform 4 KByte sectors – Uniform 32 KByte overlay blocks – Uniform 64 KByte overlay blocks • Fast Erase and Byte-Program: – Chip-Erase Time: 35 ms (typical) – Sector-/Block-Erase Time: 18 ms (typical) – Byte-Program Time: 14 µS (typical) • Auto Address Increment (AAI) Programming – Decrease total chip programming time over Byte-Program operations • End-of-Write Detection – Software polling the BUSY bit in Status Register – Busy Status readout on SO pin • Reset Pin (RST#) or Programmable Hold Pin (HOLD#) option – Hardware Reset pin as default – Hold pin option to suspend a serial sequence without deselecting the device • Write Protection (WP#) – Enables/Disables the Lock-Down function of the status register • Software Write Protection – Write protection through Block-Protection bits in status register • Temperature Range – Industrial: -40°C to +85°C • Packages Available – 8-lead SOIC (150 mils) – 8-bump XFBGA • All devices are RoHS compliant
View More
Overview
Documents
Development Environment
Similar Devices
RoHS Information
Add To Cart

Device Overview

Summary

The SST25WF080 is a member of the Serial Flash 25 Series family and features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. SST25WF080 SPI serial flash memory is manufactured with SST proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.

Please consider this device SST25WF080B

Additional Features
    Single Voltage Read and Write Operations– 1.65-1.95V
  • Serial Interface Architecture– SPI Compatible: Mode 0 and Mode 3
  • High Speed Clock Frequency– 75 MHz
  • Superior Reliability– Endurance: 100,000 Cycles (typical)– Greater than 100 years Data Retention
  • Ultra-Low Power Consumption:– Active Read Current: 2 mA (typical @ 33 MHz)– Standby Current: 5 µA (typical)
  • Flexible Erase Capability– Uniform 4 KByte sectors– Uniform 32 KByte overlay blocks– Uniform 64 KByte overlay blocks
  • Fast Erase and Byte-Program:– Chip-Erase Time: 35 ms (typical)– Sector-/Block-Erase Time: 18 ms (typical)– Byte-Program Time: 14 µS (typical)
  • Auto Address Increment (AAI) Programming– Decrease total chip programming time overByte-Program operations
  • End-of-Write Detection– Software polling the BUSY bit in Status Register– Busy Status readout on SO pin
  • Reset Pin (RST#) or Programmable Hold Pin(HOLD#) option– Hardware Reset pin as default– Hold pin option to suspend a serial sequencewithout deselecting the device
  • Write Protection (WP#)– Enables/Disables the Lock-Down function of thestatus register
  • Software Write Protection– Write protection through Block-Protection bits instatus register
  • Temperature Range– Industrial: -40°C to +85°C
  • Packages Available– 8-lead SOIC (150 mils)– 8-bump XFBGA
  • All devices are RoHS compliant
Parametrics
Name
Value
Density
8 Mbit
Op. Volt Range (V)
1.65 to 1.95
Max. Clock Freq.
75 MHz
Temp Range (°C)
-40°C to +85°C
Endurance
100,000

Documents

Jump to:

MISC

  
32KB

Development Environment

  • Code Examples

Similar Devices

Product
Memory Size
Memory Speed
Package
Price 5K
8000K
50 MHz
CSP-16, PDIP-8, SOIJ-8, TDFN-S-8
$0.87
8 Mbit
40 MHz
SOIC-8, UDFN-8, WLCSP-9
$0.91
 
104 MHz
SOIC-8, TDFN-S-8
$0.79
8Mb
104 MHz
CSP-8, SOIC-8, TDFN-S-8, UDFN-8
$0.69
 
104 MHz
SOIC-8, TDFN-S-8, UDFN-8
$0.73
 
33 MHz
PLCC-32, TSOP-32, TSOP-40
$3.39
 
33 MHz
PLCC-32, TSOP-32
$3.32

RoHS Information

Part Number
Device Weight (g)
Shipping Weight (Kg)
Lead Count
Package Type
Package Width
Solder Composition
JEDEC Indicator
RoHS
China EFUP
SST25WF080BT-40I/CS
N/A
0.064667
9
WLCSP
Varies
SAC
e1
SST25WF080B-40E/SN
0.078000
0.250000
8
SOIC
.150In(3.90mm)
Matte Tin
e3
SST25WF080B-40I/SN
0.078000
0.250000
8
SOIC
.150In(3.90mm)
Matte Tin
e3
SST25WF080BT-40E/SN
0.078000
0.230303
8
SOIC
.150In(3.90mm)
Matte Tin
e3
SST25WF080BT-40I/SN
0.078000
0.230303
8
SOIC
.150In(3.90mm)
Matte Tin
e3
SST25WF080BT-40E/SN13GVAO
0.078000
0.230303
8
SOIC
.150In(3.90mm)
Matte Tin
e3
SST25WF080B-40E/SN13GVAO
0.078000
0.250000
8
SOIC
.150In(3.90mm)
Matte Tin
e3
SST25WF080BT-40I/NP
0.006200
0.150000
8
UDFN
2x3x0.55mm
Matte Tin
e3
To see a complete listing of RoHS data for this device, please Click here
Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.

Buy from Microchip

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy