Softlog ICP2PORT(G3) Portable In-Circuit Production Programmer

Part Number: TPG100009-G3

Summary:

A member of the ICP(G3) family of high-speed, production-grade in-circuit programmers. This compact, battery-powered device supports up to six different programming environments, making it an ideal, low-cost solution for field upgrades. ICP2PORT(G3) programs Microchip 8-bit PIC® & AVR® MCUs and Serial EEPROMs & Flash ICs. ICP2PORT(G3) hardware is designed to support popular

Documents and Software

Overview

Features

Additional Resources

Related Tools

Product Features

Designed for ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc. used by Microchip, Atmel, SST and others
On-board 32MB flash memory for non-volatile storage of HEX, configuration and serialization files
Standalone operation
Counter that limits the number of times a hex file can be programmed
Three standalone serialization schemes: Sequential, random and user file (1 to 8 bytes, automatic “retlw”)
Vdd and Vpp overload protection
Power supply: 3xAA batteries, USB or power adapter
Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
Programmable delay between Vdd and Vpp (0.1 to 250ms)
Programmable clock/data speed (500KHz to 10MHz)
Programmable Vdd source (ICP2PORT(G3) or target)
Vdd current limit: 100mA (40mA if powered from USB only)
Prevents damage to the connected microcontroller in case of power ON and power OFF
Dimensions: 145 x 82 x 28mm

There are currently no related tools to display.

Package Contents

Programmer unit
USB cable (A-mini USB)
Sub-D 15-pin mating connector
USB install instructions
Quick start manual