Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

Softlog ICP2PORT(G3)-P Portable In-Circuit Production Programmer

Part Number: TPG100010-G3

Summary:

A member of the ICP(G3) family of high-speed, production-grade in-circuit programmers. This compact, battery-powered device supports up to six different programming environments, making it an ideal, low-cost solution for field upgrades. ICP2PORT(G3)-P programs Microchip 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs and Serial EEPROMs & Flash ICs. ICP2PORT(G3)-P

View More
Documents and Software
Overview
Features
Additional Resources
Related Tools

Additional resources data currently not available.


There are currently no documents or software to display.

Product Features

    • Designed for ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc. used by Microchip, Atmel, SST and others
    • On-board 32MB flash memory for non-volatile storage of HEX, configuration and serialization files
    • Standalone operation
    • Counter that limits the number of times a hex file can be programmed
    • Three standalone serialization schemes: Sequential, random and user file (1 to 8 bytes, automatic “retlw”)
    • Vdd and Vpp overload protection
    • Power supply: 3xAA batteries, USB or power adapter
    • Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
    • Programmable delay between Vdd and Vpp (0.1 to 250ms)
    • Programmable clock/data speed (500KHz to 10MHz)
    • Programmable Vdd source (ICP2PORT(G3) or target)
    • Vdd current limit: 100mA (40mA if powered from USB only)
    • Prevents damage to the connected microcontroller in case of power ON and power OFF
    • Dimensions: 145 x 82 x 28mm

Summary

A member of the ICP(G3) family of high-speed, production-grade in-circuit programmers. This compact, battery-powered device supports up to six different programming environments, making it an ideal, low-cost solution for field upgrades. ICP2PORT(G3)-P programs Microchip 8-bit PIC® & AVR® MCUs, 16-bit PIC MCUs & dsPIC® DSCs and Serial EEPROMs & Flash ICs. ICP2PORT(G3)-P hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc.)

Package Contents

  • Programmer unit
  • USB cable (A-mini USB)
  • Sub-D 15-pin mating connector
  • USB install instructions
  • Quick start manual