Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

MIC5210

Dual 150mA 1% Accuracy Low Noise LDO

Status: In Production

Features:

  • Up to 150mA per regulator output
  • Low quiescent current
  • Low dropout voltage
  • Wide selection of output voltages
  • Tight load and line regulation
  • Low temperature coefficient
  • Current and thermal limiting
  • Reversed input polarity protection
  • Zero off-mode current
  • Logic-controlled electronic enable
  • 8L MSOP package
View More
Overview
Documents
Development Environment
RoHS Information
Buy Now

Device Overview

Summary

The MIC5210 is a dual linear voltage regulator with very low dropout voltage (typically 10mV at light loads and 140mV at 100mA), very low ground current (225µA at 10mA output), and better than 1% initial accuracy. It also features individual logic-compatible enable/shutdown control inputs.

Both regulator outputs can supply up to 150mA at the same time as long as each regulator's maximum junction temperature is not exceeded.

Designed especially for hand-held battery powered devices, the MIC5210 can be switched by a CMOS or TTL compatible logic signal, or the enable pin can be connected to the supply input for 3-terminal operation. When disabled, power consumption drops nearly to zero. Dropout ground current is minimized to prolong battery life.

Key features include current limiting, over temperature shutdown, and protection against reversed battery.

The MIC5210 is available in 2.7V, 2.8V, 3.0V, 3.3V, 3.6V, 4.0V, and 5.0V fixed voltage configurations. Other voltages are available; contact Microchip for details.

Additional Features
    • Up to 150mA per regulator output
    • Low quiescent current
    • Low dropout voltage
    • Wide selection of output voltages
    • Tight load and line regulation
    • Low temperature coefficient
    • Current and thermal limiting
    • Reversed input polarity protection
    • Zero off-mode current
    • Logic-controlled electronic enable
    • 8L MSOP package
Parametrics
Name
Value
Product Type
Dual LDOs
# of Out
2
IOUT #1
150
IOUT #2
150
IOUT #3
n/a
IOUT #4
n/a
IOUT (mA)
150
VIN Min (V)
2.5
VIN Max (V)
16
VOUT (V)
Please Contact Sales Office
Voltage Drop Typ (mV)
165
IGND Typ (µA)
80
Tol Typ %
±1
PSRR 1 kHz (dB)
75
Soft Start Pin
Load Dump
Rev Bat
Yes
Reverse Current Protect

Documents

Jump to:

Data Sheet

03/13/2019
1014KB

Development tools data is currently unavailable.

RoHS Information

Part Number
Device Weight (g)
Shipping Weight (Kg)
Lead Count
Package Type
Package Width
Solder Composition
JEDEC Indicator
RoHS
China EFUP
MIC5210-3.3YMM-TR
0.025100
0.334700
8
MSOP
3x3mm
NiPdAu
e4
MIC5210-5.0YMM
0.025100
0.124600
8
MSOP
3x3mm
NiPdAu
e4
MIC5210-3.3YMM
0.025100
0.124600
8
MSOP
3x3mm
NiPdAu
e4
MIC5210-2.8YMM-TR
0.025100
0.334700
8
MSOP
3x3mm
NiPdAu
e4
MIC5210-3.0YMM
0.025100
0.124600
8
MSOP
3x3mm
NiPdAu
e4
MIC5210-5.0YMM-TR
0.025100
0.334700
8
MSOP
3x3mm
NiPdAu
e4
MIC5210-2.8YMM
0.025100
0.124600
8
MSOP
3x3mm
NiPdAu
e4
MIC5210-3.0YMM-TR
0.025100
0.334700
8
MSOP
3x3mm
NiPdAu
e4
To see a complete listing of RoHS data for this device, please Click here
Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.

Buy from the Microchip Store

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy