Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

TC1266

EOL

Status: End of Life

Features:

  • Glitch-Free Transition Between Input Sources
  • Automatic Input Source Selection
  • External PMOS Bypass Switch Control
  • Built-In 5V Detector
  • Kelvin Sense Input
  • Low Dropout Voltage (240 mV @ Full Load)
  • Low Ground Current, Independent of Load
View More
Overview
Documents
Development Environment
RoHS Information
Buy Now

Device Overview

Summary

The TC1266 is an application-specific, low dropout regulator (LDO) specifically intended for use in PCI peripheral card applications complying with PCI Power Management (PCI 2.0). It provides an uninterrupted, 3.3V, 200 mA (max) output voltage when the main (5V) or auxiliary (3.3V) input voltage supplies are present. The TC1266 consists of an LDO, a voltage threshold detector, external switchover logic and gate drive circuitry. It functions as a conventional LDO as long as the voltage on the main supply input (VIN) is above the lower threshold (3.90V typ). Should the voltage on VIN fall below the lower threshold the LDO is disabled, and an external P-channel MOSFET is automatically turned on, connecting the auxiliary supply input to VOUT, and ensuring an uninterrupted 3.3V output. The main supply is automatically selected if both the main and auxiliary input supplies are present, and transition from one input supply to the other is guaranteed glitch-free. High integration, automatic secondary supply switchover, Kelvin sensing,and small size make the TC1266 the optimum LDO for PCI 2.0 applications.

Additional Features
    • Glitch-Free Transition Between Input Sources
    • Automatic Input Source Selection
    • External PMOS Bypass Switch Control
    • Built-In 5V Detector
    • Kelvin Sense Input
    • Low Dropout Voltage (240 mV @ Full Load)
    • Low Ground Current, Independent of Load

Documents

Jump to:

Data Sheet

12/01/2014
262KB

Product Line Card

Development Environment

  • Demo & Evaluation Boards
Demo & Evaluation Boards
8-Pin SOIC/MSOP/TSSOP/DIP Evaluation Board
8-Pin SOIC/MSOP/TSSOP/DIP Evaluation Board ( SOIC8EV )

This is a blank PCB that allows the operation of Microchip Technology’s 8-pin devices to be easily evaluated. Each device pin is connected to a pull-up resistor, a pull-down resistor, an in-line resistor, and a loading capacitor. The PCB pads allow through hole or surface mount connectors to be installed to ease connection to the board. Additional passive component footprints are on the...

Learn More
Add To Cart

Rohs data is currently unavailable.

Buy from the Microchip Store

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy