Microchip Technology Inc
‹
Product Parametric Search

Search for Microchip products by group and parametrics.

MCP6V9X

This family of operational amplifiers provides input offset voltage correction for very low offset and offset drift, with a gain bandwidth product of 10 MHz.

Ultra-Low Quiescent Current

A small LDO with immense functionality. The MIC5306 provides ultra-fast transient response and high PSRR while operating with an ultra-low quiescent current.

DSC6000

The new DSC6000 family is the industry's smallest MEMS MHz oscillator with the lowest power consumption over full frequency range of 2 KHz to 100 MHz.

GigEpack Ethernet Products

Advanced design techniques ensure reliable operation under extreme conditions while stripping away complexity and advancing ease-of-use, the GigEpack provides three key elements: Certified Products, free drivers and copy-ready evaluation boards, and Microchip’s free LANCheck® design check service. Together, they ensure interoperability, rapid development and robust board design.

UTC2000

Microchip's strong brand name and expertise in USB solutions is demonstrated yet again with the UTC2000. We deliver a simple and easy solution to implement the revolutionary USB-C™ connector in practically any consumer, industrial or automotive application.

HV9805

The HV9805 features a PFC boost converter with valley/ZCD switching that reduces system cost by lessening the thermal and optical design requirements. The linear post-regular provides True DC lighting with no flickering and the configurable to SEPIC technology supports lower LED string voltage.

MEC14XX

The MEC14XX family is one of the first to support both the Intel® Corporation’s new Enhanced Serial Peripheral Interface (eSPI) and the existing Low Pin Count (LPC) interface.

SST26WF080B/040B

Manufactured with SuperFlash® technology that provides the industry's fastest erase times, the SST26WF080B (8 Mbit) and SST26WF040B (4 Mbit) are approximately 300 times faster than competitive devices.

MTCH10x: Direct Mechanical Buttons Replacement

In a hardware-only configuration, these 2, 5 and 8 channel capacitive touch controllers replace mechanical buttons with a simple digital output, making it easy to add proximity and touch detection to any application.

RN2903

Long-range and low-power LoRa® Sub-GHz, 915 MHz module for IoT networks.

CrytpoAuth-XPRO-B Board

ATCryptoAuth-XPRO-B, The CryptoAuth XPRO version B board is an extension to prototype with secure elements (ECC, SHA, AES) on any Xplained Pro microcontroller board

Search for Microchip products by groups and parametric values.

PIC32 Bluetooth Audio Development Kit (DV320032)

This kit delivers the hardware and software needed to develop digital audio docking applications with USB or Bluetooth connectivity. Preloaded demo code enables audio streaming via USB or Bluetooth.

OS81118

The OS81118 is a highly integrated Intelligent Network Interface Controller (INIC) for MOST150. It supports optical or coaxial physical layer networks and contains USB, MediaLB®, I2C, Streaming, SPI and GPIO interfaces.

MCP73871 Fully Integrated Linear Solution

The MCP73871 device is a 1A fully integrated linear solution for system load sharing and Li-Ion / Li-Polymer battery charge management with AC-DC wall adapter and USB port power sources selection. It's also capable of autonomous power source selection between input or battery.

CAN FD Transceiver Family

The CAN Flexible Data Rate (CAN FD) Transceiver family helps CAN systems meet the physical layer requirement for CAN FD systems, and is one of only a few CAN FD transceivers approved by auto OEMs.

MEC14XX

The MEC14XX family is one of the first to support both the Intel® Corporation’s new Enhanced Serial Peripheral Interface (eSPI) and the existing Low Pin Count (LPC) interface.

TC7106A

The TC7106A 3½ digit LCD direct-display drive analog-to-digital converters allow existing TC7106-based systems to be upgraded. Each device has a precision reference with a 20ppm/°C max temperature coefficient. This represents a 4-7 times improvement over similar 3½ digit converters.

LAN9352/LAN9352i

The LAN9352/LAN9352i is a high-performance, small-footprint, full-featured 2-port managed Ethernet switch and is application-optimized for consumer, embedded and Industrial designs.

MCP2561/2 FD

This is a second generation high-speed CAN transceiver that guarantees Loop Delay Symmetry in order to support higher data rates required for CAN FD. Maximum propagation delay was improved to support longer bus length. The device meets the automotive requirements for CAN FD bit rates exceeding 5 Mbps.

Class B Safety Software Library

Microchip has developed a library of low-level software routines and hardware peripherals that simplify meeting IEC 60730 requirements for Class B Safety. Each product family (PIC16, PIC18, PIC24, dsPIC® DSC and PIC32) has functions specifically designed to work efficiently with the available resources.

dsPIC33EP "GS" Family for Digtal Power Applications

This family delivers the performance needed to implement more sophisticated non-linear, predictive & adaptive control algorithms at higher switching frequencies. These advanced algorithms enable power supply designs that are more energy efficient & have better power supply specifications.

WCM and ECM Development Kits

Microchip's WCM (Wi-Fi® Client Module) and ECM (Ethernet Client Module) development kits are designed to enable you to quickly and easily connect an embedded system to a cloud-based server, such as Amazon Web Services (AWS). This will reduce the learning curve and help you get connected to the cloud quickly.

Smart Lights are Better Lights

Microchip's PIC® microcontrollers with intelligent analog integration like the PIC16F176X family make it possible to get advanced features such as digital control to smooth dimming, as well as color temperature tuning, usage-based lifetime prediction and networked communication for monitoring and control.

PIC24FJ256GB412

PIC24F 16-bit microcontroller featuring integrated Hardware Crypto module and eXtreme Low Power. This family also includes 256 KB Flash, 16 KB RAM, USB, LCD and advanced peripherals. The combination of features makes the part ideally suited for low-power embedded security applications.

OS82150

The OS82150 extends the usage of coaxial cabling to powerful infotainment networks based on MOST150 technology.

Is Your Medical Device Design Secured?

Is your medical device design truly secured? Microchip's full line of security products, including MCUs, wireless products and software libraries, can secure your medical device designs from the ground up.

MCP39F511

The MCP39F511 is a highly integrated, single-phase power-monitoring IC designed for real-time measurement of input power for AC/DC power supplies, providing power and energy values. It includes dual-channel delta sigma ADCs, a 16-bit calculation engine, EEPROM and a flexible 2-wire interface.

MCP8026

This is a 3-Phase brushless gate driver with power module & 5 µA (typ) sleep-mode current. It integrates three half-bridge drivers to drive external NMOS/NMOS transistor pairs configured to drive a 3-phase BLDC motor, a comparator, a voltage regulator to provide bias to a companion microcontroller & power monitoring comparators.

dsPIC33EP32MC202

The dsPIC33E family of digital signal controllers (DSCs) features a 70 MIPS dsPIC® DSC core with integrated DSP and enhanced on-chip peripherals. These DSCs enable the design of high-performance, precision motor control systems that are more energy efficient, quieter in operation.

PIC24FJ128GB204

The new PIC24F "GB4" family expands Microchip's eXtreme Low Power portfolio and includes an integrated hardware crypto engine with both OTP and Key RAM options for secure key storage, up to 256 KB of Flash memory and a direct drive for segmented LCD displays, in 64-, 100- or 121-pin packages.

Single-Burner Induction Cooktop Reference Design

This cost-effective single-burner induction cooktop reference design is a fully functional single-burner unit that achieves greater than 90%* efficiency and consumes less than 0.5W power during standby. The user interface implements mTouch® sensing solutions.

Smartphone Accessory

New accessories are emerging in sports/fitness, wellness, financial transactions markets. Microchip's accessory development kits make it easy to development your accessory products with fast time-to-market!

MTCH10x: Direct Mechanical Buttons Replacement

In a hardware-only configuration, these 2, 5 and 8 channel capacitive touch controllers replace mechanical buttons with a simple digital output, making it easy to add proximity and touch detection to any application.

UTC2000

Microchip's strong brand name and expertise in USB solutions is demonstrated yet again with the UTC2000. We deliver a simple and easy solution to implement USB-C in practically any application, whether consumer, industrial, or automotive.

RN2903

Long-range and low-power LoRa® Sub-GHz, 915 MHz module for IoT networks.

Need Help?

Visit the Microchip forums to get more information on frequently asked questions or to engage with the community. You can pose your own questions and receive feedback.

PICKIT™ 4 In-Circuit Debugger/Programmer

The MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast and easy debugging and programming of PIC® and dsPIC® flash microcontrollers. With an additional micro SD card slot and the ability to be self-powered from the target, you can take your code with you and program on the go.

Microchip Forums

Visit the Microchip forums to get more information on frequently asked questions or to pose your own question and receive feedback from the community.

Subscribe to MicroSolutions

MIcroSolutions is a valuable resource that delivers the latest information in each issue with updates on our new products and development tools You will also find design articles on a wide range of topics and learn about some innovative ways Microchip devices are being used.

Subscribe to MicroSolutions

MIcroSolutions is a valuable resource that delivers the latest information in each issue with updates on our new products and development tools You will also find design articles on a wide range of topics and learn about some innovative ways Microchip devices are being used.

Microchip Conferences, Tradeshows and Events

Microchip attends conferences and events around the world, visit our events page to see where we will be exhibiting next.

Microchip in the Press

View our latest announcements on products, corporate news and investor press announcements.

Contact Us

If you have questions about products, tools, literature or about content on our website, click here to find out how to contact Microchip.

Subscribe to MicroSolutions

MIcroSolutions is a valuable resource that delivers the latest information in each issue with updates on our new products and development tools You will also find design articles on a wide range of topics and learn about some innovative ways Microchip devices are being used.

Microchip Forums

Visit the Microchip forums to get more information on frequently asked questions or to pose your own question and receive feedback from the community.

Purchase Now Direct from Microchip

Over 250 million units in stock

Special pricing available for high volumes

Approved credit line with payment terms available

Fast and secure low-cost programming

Microchip Forums

Visit the Microchip forums to get more information on frequently asked questions or to engage with the community. You can pose your own questions and receive feedback.

Subscribe to MicroSolutions

Published six times a year, MicroSolutions is a valuable resource that delivers the latest information to give you a competitive edge and help you meet your design goals. In each issue, you'll get an update on our new products and development tools, find design articles on a wide range of topics and learn about some innovative ways Microchip devices are being used by developers of a variety of applications.

170627-txfg-bnr-dc-1d-turnkey-1170x360
161020-hmid-bnr-touch-1170x360
 
Menu
 
Home > Touch & Gesture > Design Partners

Design Partners

Touch Design Partner Specialists

The following companies have proven touch and Human-Machine Interface (HMI) design expertise as verified by Microchip. Please contact any of these companies for design services and support for your Touch project needs.

partner_logo-mtouchr

Click on below options to see lists of Design Partners.

1D Touch: Buttons, Sliders, and Wheels
+
Design Partner Location(s) Contact InformationKey Benefits
Wisconsin, USA
Europe		sales@amtouchusa.com
+1 (414) 847-1814 		 
Taiwan, Far EastLaura Jing@Amtouch.com.tw
+886 2 2430-2666, ext 2201		 
Ohio, USA tmatt@deltasystemsinc.com
+1 (330) 422-2511
Germany, Europe marcus.riegger@demmel.de
+49 8381 919 0
France, Europecontact@ines-rd.com
+33 (0) 2 41 48 49 44
Berkshire, UKinfo@i-lcd.com
+44 (0) 1635 294600
California, USA SandraWada@keegroup.com
+1 (714) 510-3117
France, Europe+33 2 41 21 41 21
Germany, Europedaniel.schaeftner@schaeftner-engineering.com
+49 (0) 171 15 86 382
Tennessee, USA brian@viper-design.com
+1 (615) 389-3027
Hong Kong, China Touch.Specialist@willas-array.com
+86-0755-88295600 (ext 5755)
Wisconsin, USA BHeidenrich@xymox.com
+1 (414) 362-9000
2D Touch: Touchscreens
+
Design PartnerLocation(s)Contact InformationKey Benefits
Shenzhen, Chinakiki.deng@av-display.com
+86 (755) 8886-0696
  • More than 20 years experience in design and manufacturing displays & touches for industrial applications
  • Vertical Integration: In House for CNC, Tempered, Glass Sensor, Film Sensor, Optical Bonding, etc.
  • One-Stop to Buy
  • Low MOQ & Flexible Support
DATA MODULNew York, USA 
Munich, Germany		USA
tklingl@data-modul.com
+1 (631) 951-0800
Germany
MHell@data-modul.com
+49 89 56017 134
  • Display distributor
  • Standard sensor line-up 3.0” to 23.8”
  • Custom sensor designs 
  • Local presence in EU countries and USA (East/West coast offices)
  • In house optical bonding and lamination 
  • On-site FAE support 
DAWAR Technologies, Inc.Pennsylvania, USATony Gray
tgray@dawar.com
+1 (972) 491-1260
  • Support Glass and Film sensors
  • US based low volume production
  • Asia based manufacturing for high volume projects
  • In house OCR bonding
ELO TouchTaipei, Taiwan
Texas, USA 
Leuven, Belgium

Taiwan
steven.lai@elotouch.com
+886 2 7743 3660
USA
Brian.Atwood@elotouch.com
+1 (919) 649-8445
Belgium
michael.bartelmess@elotouch.com
+32 16 704 509

  • Offers IntelliTouch® Pro PCAP touchscreens from 7" to 55”
  • Manufacturing facilities in California & China
  • Supports glass and film sensors
  • Strong global sales & support
MSCStuntensee, Germanyfplo@msc-ge.com
+49 7249 9103817
  • Broad standard module offering
  • Customizations of sensors
  • Display distributor
  • Local presence in EU countries
  • One glass / nanowire solution support 
NVD (New Vision Display)Shenzhen, China 
Windelstein, Germany 
California, USA		China
GregorySmith@newvisiondisplay.com
+86 755 2862 0888
Germany
BillMoore@newvisiondisplay.com
+86 186 4310 0325
USA
SteveGerisch@newvisiondisplay.com
+1 (916) 281-4928
  • Vertically integrated 1 stop LCM provider
  • Owns and operates 3 factories in China
  • Manufactures Passive & Active LCDs.
  • In-house chemically strengthened cover glass manufacturing
  • Glass and Film based PCAP sensors up to 25" with glove, water, salt water, and stylus support
PDA (Precision Design Associates)Georgia, USAPhil Wills
+1 (770) 664-0448
  • Engaged with QRG before Atmel and Microchip
  • Broad standard module offering
  • Flexible outsourced sensor supply chain
  • Flexible business models
  • Flexible sensor stack/pattern
PromateTaipei, Taiwan
Shanghai, China
Breda, The Netherlands		Taiwan
ricky_chen@promate.com
+886 2 2659 0606
China
smile_wang@promate.com.cn
+86 21 6082 2688 
The Netherlands
wilco_bos@promate.com
+31 0 85 0021465
  • Turnkey mission critical human machine interface (HMI) design and manufacturing
  • High performance display and touch panel optical bonding
  • Display enhancements: ruggedize, sunlight readability
  • Sensor/circuit design, PCB layout and SMT capabilities
  • Software integration support, multi-OS
RAFIBerg, Germanyeric.bulach@rafi.de
+49 751 89-1495
  • Strong industrial, medical and commercial vehicle market expertise
  • Specialist in all kind of HMI devices
  • HW, SW, mechanical design and production
  • Sensor design and production
  • Glass (up to 24”) and film sensor 
  • Own glass sensor production
  • Clean room facilities 
Tianma Japan, Ltd.Kawasaki, JapanWeb Form
+81 44 435 1666
  • Broad Product Offering with True Industrial Design and One-Stop-Shop including displays with touch panels
  • World Class Factories with Cutting Edge R & D
  • Strategic commitment to manufacturing with a focus on supporting Professional Display Products and Long product life policy
Touch InternationalTexas, USAsales@touchintl.com
+1 (512) 832-8292
  • Vertically Integrated OEM Solutions Provider
  • Touch Panels / Optical Filters - 0.5” to 90”
  • In-House Display Enhancement - Sunlight Readable / NVIS / Dual-Mode
  • Dry Film & Liquid Optical Bonding
  • Low Volume/High Mix - High Volume Repeatable
  • ISO9001 / AS9100 / ISO13485 / ROHS2 / REACH / ITAR
TouchnetixFareham, U.K.george.east@touchnetix.com
+44 (0) 1489 611833
  • Engaged with QRG before Atmel and Microchip
  • Flexible business model
  • Handle small and large volume
  • Multi ITO sensor technologies supported
TouchTurnsCalifornia, USAbenson.li@touchturns.com
+1 (408) 645-2606
  • ITO, Carbon, Ag, FLM
  • Santa Clara proto clean room
  • Rapid 2 week prototyping
  • CNI in China for high volume
  • P1 thin sensor on film
  • Glass or Film: 1.2” to 21.5”
UNI-ELECTRONICS/ GallardoTokyo, Japansuyama@uni-elec.co.jp
+81-3-6811-7478
  • Wide variety of capacitive Touch Panel/Switch business results
  • H/W Design and manufacturing support
  • Tuning support is also available with specialized equipment
  • Configuration tuning (S/W support) available
  • Very fast time to market
  • Flexible sensor stack/pattern