Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

SY88347DL

Status: End of Life

Features:

  • Single 3.3V power supply
  • 155Mbps to 3.2Gbps operation
  • Low-noise PECL data outputs
  • High-gain LOS output
  • Chatter-free Open-Collector TTL Loss-of-Signal (LOS) output
  • TTL /EN input
  • Programmable LOS level set (LOS LVL)
  • Ideal for multi-rate applications
  • Available in a tiny 10-pin EPAD-MSOP
View More
Overview
Documents
Development Environment
RoHS Information
Add To Cart

Device Overview

Summary

The SY88347DL low-power limiting post amplifier is designed for use in fiber-optic receivers. The device connects to typical transimpedance amplifiers (TIAs) . Th e linear signal output, from TIAs, can contain significant amounts of noise and may vary in amplitude over time. The SY88347DL quantizes these signals and outputs PECL-level waveforms. The SY88347DL operates from a single +3.3V power supply, over temperatures ranging from -40°C to +85°C. With its wide bandwidth and high gain, signals with data rates up to 3.2Gbps, and as small as 5mV PP , can be amplified to drive devices with PECL inputs. The SY88347DL generates a high-gain loss-of-signal (LOS) open-collector TTL output. The LOS function has a high-gain input stage for increased sensitivity. A programmable loss-of-signal level set pin (LOS LVL) sets the sensitivity of the input amplitude detection. LOS asserts high if the input amplitude falls below the threshold sets by LOS LVL and de-asserts low otherwise. The enable bar input (/EN) de-asserts the true output signal without removing the input signal. The LOS output can be fed back to the /EN input to maintain output stability under a loss-of-signal condition. Typically, 3.3dB LOS hysteresis is provided to prevent chattering.

Additional Features
  • Single 3.3V power supply
  • 155Mbps to 3.2Gbps operation
  • Low-noise PECL data outputs
  • High-gain LOS output
  • Chatter-free Open-Collector TTL Loss-of-Signal (LOS) output
  • TTL /EN input
  • Programmable LOS level set (LOS LVL)
  • Ideal for multi-rate applications
  • Available in a tiny 10-pin EPAD-MSOP
Parametrics
Name
Value
Part Type
Limiting Amplifiers - Continuous Mode
Data Rate Capability
3.2Gbps
Power Supply (V)
3.3
Data Input Type
PECL
Data Output Type
PECL
LOS/SD
LOS (TTL)
LOS/SD Gain
4X
RC Time Constant
20X
Hysteresis Typ (dB)
3.5

Documents

Jump to:

Development tools data is currently unavailable.


Rohs data is currently unavailable.

Buy from Microchip

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy