Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
  • product video
product primary image

SST25PF020B

2Mb 2.3-3.6V SPI Serial Flash

Status: In Production

Features:

  • Single Voltage Read and Write Operations - 2.3-3.6V
  • Serial Interface Architecture - SPI Compatible: Mode 0 and Mode 3
  • High Speed Clock Frequency - 80 MHz (2.7-3.6V operation) - 50 MHz (2.3-2.7V operation)
  • Superior Reliability - Endurance: 100,000 Cycles (typical) - Greater than 100 years Data Retention
  • Low Power Consumption: - Active Read Current: 10 mA (typical) - Standby Current: 5 µA (typical)
  • Flexible Erase Capability - Uniform 4 KByte sectors - Uniform 32 KByte overlay blocks - Uniform 64 KByte overlay blocks
  • Fast Erase and Byte-Program: - Chip-Erase Time: 35 ms (typical) - Sector-/Block-Erase Time: 18 ms (typical) - Byte-Program Time: 7 µs (typical)
  • Auto Address Increment (AAI) Programming - Decrease total chip programming time over Byte-Program operations
  • End-of-Write Detection - Software polling the BUSY bit in Status Register - Busy Status readout on SO pin in AAI Mode
  • Hold Pin (HOLD#) - Suspends a serial sequence to the memory without deselecting the device
  • Write Protection (WP#) - Enables/Disables the Lock-Down function of the status register
  • Software Write Protection - Write protection through Block-Protection bits in status register
  • Temperature Range - Commercial: 0°C to +70°C
  • Packages Available - 8-lead SOIC (150 mils) - 8-contact WSON (6mm x 5mm) - 8-contact USON (3mm x 2mm)
  • All non-Pb (lead-free) devices are RoHS compliant
View More
Overview
Documents
Development Environment
Similar Devices
RoHS Information
Buy Now

Device Overview

Summary

The 25 series Serial Flash family features a four-wire, SPIcompatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. The SST25PF020B devices are enhanced with improved operating frequency and even lower power consumption. SST25PF020B SPI serial flash memories are manufactured with SST proprietary, highperformance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.

Additional Features
  • Single Voltage Read and Write Operations- 2.3-3.6V
  • Serial Interface Architecture- SPI Compatible: Mode 0 and Mode 3
  • High Speed Clock Frequency- 80 MHz (2.7-3.6V operation)- 50 MHz (2.3-2.7V operation)
  • Superior Reliability- Endurance: 100,000 Cycles (typical)- Greater than 100 years Data Retention
  • Low Power Consumption:- Active Read Current: 10 mA (typical)- Standby Current: 5 µA (typical)
  • Flexible Erase Capability- Uniform 4 KByte sectors- Uniform 32 KByte overlay blocks- Uniform 64 KByte overlay blocks
  • Fast Erase and Byte-Program:- Chip-Erase Time: 35 ms (typical)- Sector-/Block-Erase Time: 18 ms (typical)- Byte-Program Time: 7 µs (typical)
  • Auto Address Increment (AAI) Programming- Decrease total chip programming time overByte-Program operations
  • End-of-Write Detection- Software polling the BUSY bit in Status Register- Busy Status readout on SO pin in AAI Mode
  • Hold Pin (HOLD#)- Suspends a serial sequence to the memorywithout deselecting the device
  • Write Protection (WP#)- Enables/Disables the Lock-Down function ofthe status register
  • Software Write Protection- Write protection through Block-Protection bitsin status register
  • Temperature Range- Commercial: 0°C to +70°C
  • Packages Available- 8-lead SOIC (150 mils)- 8-contact WSON (6mm x 5mm)- 8-contact USON (3mm x 2mm)
  • All non-Pb (lead-free) devices are RoHS compliant
Parametrics
Name
Value
Density
2 Mbit
Op. Volt Range (V)
2.3 to 3.6
Max. Clock Freq.
80 MHz
Temp Range (°C)
0°C to +70°C
Endurance
100,000
Data Retention (Years)
100
Bus Modes
SPI

Documents

Jump to:

Data Sheets

Brochures

12/19/2017
3698KB

Code Examples

Development Environment

  • Code Examples

Similar Devices

Product
Memory Size
Memory Speed
Package
Price 5K
2000K
33 MHz
SOIC-8, TDFN-S-8
$0.44
2 Mbit
80 MHz
SOIC-8, TDFN-S-8, USON-8
$0.50
 
20 MHz
SOIC-8, TDFN-S-8
$0.44
2000K
80 MHz
SOIC-8, TDFN-S-8, USON-8
$0.53
2 Mbit
40 MHz
SOIC-8, TDFN-S-8, UDFN-8, WLCSP-9
$0.58

RoHS Information

Part Number
Device Weight (g)
Shipping Weight (grams)
Lead Count
Package Type
Package Width
Solder Composition
JEDEC Indicator
RoHS
China EFUP
SST25PF020B-80-4C-Q3AE-T
0.016900
0.031333
8
USON
2x3x0.6mm
Matte Tin
e3
SST25PF020B-80-4C-SAE
0.078000
0.250000
8
SOIC
.150In(3.90mm)
Matte Tin
e3
SST25PF020B-80-4C-SAE-T
0.078000
0.230303
8
SOIC
.150In(3.90mm)
Matte Tin
e3
SST25PF020B-80-4C-QAE
0.073800
0.163265
8
TDFN-S
6x5x0.8mm
Matte Tin
e3
SST25PF020B-80-4C-QAE-T
0.073800
0.200000
8
TDFN-S
6x5x0.8mm
Matte Tin
e3
To see a complete listing of RoHS data for this device, please Click here
Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.

Buy from the Microchip Store

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy