Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

MIC5200

100mA, 1% Accuracy LDO Regulator

Status: In Production

Features:

  • High output voltage accuracy
  • Variety of output voltages
  • Guaranteed 100mA output
  • Low quiescent current
  • Low dropout voltage
  • Extremely tight load and line regulation
  • Very low temperature coefficient
  • Current and thermal limiting
  • Zero off-mode current
  • Logic-controlled electronic shutdown
  • Available in 8-pin SOIC, MM8® 8-pin MSOP and SOT-223 packages
View More
Overview
Documents
Development Environment
RoHS Information
Add To Cart

Device Overview

Summary

The MIC5200 is an efficient linear voltage regulator with very low dropout voltage (typically 17mV at light loads and 200mV at 100mA) and very low ground current (1mA at 100mA output), offering better than 1% initial accuracy with a logic-compatible on/off switching input. Designed especially for handheld battery powered devices, the MIC5200 is switched by a CMOS- or TTL-compatible logic signal. The enable control may be tied directly to VIN if unneeded. When disabled, power consumption drops nearly to zero. The ground current of the MIC5200 increases only slightly in dropout, further prolonging battery life. Key MIC5200 features include protection against reversed battery, current limiting, and over-temperature shutdown.

The MIC5200 is available in several fixed voltage and accuracy configurations.

Additional Features
    • High output voltage accuracy
    • Variety of output voltages
    • Guaranteed 100mA output
    • Low quiescent current
    • Low dropout voltage
    • Extremely tight load and line regulation
    • Very low temperature coefficient
    • Current and thermal limiting
    • Zero off-mode current
    • Logic-controlled electronic shutdown
    • Available in 8-pin SOIC, MM8® 8-pin MSOP and SOT-223 packages
Parametrics
Name
Value
Product Type
Single LDOs
# of Out
1
IOUT #1
100
IOUT #2
n/a
IOUT #3
n/a
IOUT #4
n/a
IOUT (mA)
100
VIN Min (V)
2.5
VIN Max (V)
26
VOUT (V)
3.0, 3.3, 4.8, 5.0
Voltage Drop Typ (mV)
230
IGND Typ (µA)
130
Tol Typ %
±1
Noise (µV) rms
100
PSRR 1 kHz (dB)
70
Soft Start Pin
Load Dump
Rev Bat
Yes
Reverse Current Protect

Documents

Jump to:

Data Sheets


Development tools data is currently unavailable.

RoHS Information

Part Number
Device Weight (g)
Shipping Weight (grams)
Lead Count
Package Type
Package Width
Solder Composition
JEDEC Indicator
RoHS
China EFUP
MIC5200-5.0YMM
0.025100
0.124600
8
MSOP
3x3mm
NiPdAu
e4
MIC5200-5.0YMM-TR
0.025100
0.334700
8
MSOP
3x3mm
NiPdAu
e4
MIC5200-3.3YMM
0.025100
0.124600
8
MSOP
3x3mm
NiPdAu
e4
MIC5200-3.3YMM-TR
0.025100
0.334700
8
MSOP
3x3mm
NiPdAu
e4
MIC5200-3.3YM
0.075000
0.163265
8
SOIC
3.90mm(.150in)
NiPdAu
e4
MIC5200-3.3YM-TR
0.075000
0.250000
8
SOIC
3.90mm(.150in)
NiPdAu
e4
MIC5200-5.0YM
0.075000
0.163265
8
SOIC
3.90mm(.150in)
NiPdAu
e4
MIC5200-5.0YM-TR
0.075000
0.250000
8
SOIC
3.90mm(.150in)
NiPdAu
e4
MIC5200-3.0YM-TR
0.075000
0.250000
8
SOIC
3.90mm(.150in)
NiPdAu
e4
MIC5200-4.8YM
0.075000
0.163265
8
SOIC
3.90mm(.150in)
NiPdAu
e4
MIC5200-4.8YM-TR
0.075000
0.250000
8
SOIC
3.90mm(.150in)
NiPdAu
e4
MIC5200-3.0YM
0.075000
0.163265
8
SOIC
3.90mm(.150in)
NiPdAu
e4
MIC5200-3.0YS
0.123000
0.243590
3
SOT-223
-
Matte Tin
e3
MIC5200-3.0YS-TR
0.123000
0.440000
3
SOT-223
-
Matte Tin
e3
MIC5200-3.3YS
0.123000
0.243590
3
SOT-223
-
Matte Tin
e3
MIC5200-3.3YS-TR
0.123000
0.440000
3
SOT-223
-
Matte Tin
e3
MIC5200-4.8YS
0.123000
0.243590
3
SOT-223
-
Matte Tin
e3
MIC5200-4.8YS-TR
0.123000
0.440000
3
SOT-223
-
Matte Tin
e3
MIC5200-5.0YS
0.123000
0.243590
3
SOT-223
-
Matte Tin
e3
MIC5200-5.0YS-TR
0.123000
0.440000
3
SOT-223
-
Matte Tin
e3
To see a complete listing of RoHS data for this device, please Click here
Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.

Buy from the Microchip Store

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy