Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

MIC24053

19V/9A High Efficiency DC-DC Buck Regulator

Status: In Production

Features:

  • Hyper Speed Control™ architecture enables
  • High delta V operation (VIN = 19V and VOUT = 0.8V)
  • Small output capacitance
  • Input voltage range: 4.5V to 19V
  • Output current up to 9A, up to 95% efficiency
  • Adjustable output voltage from 0.8V to 5.5V
  • ±1% feedback accuracy
  • Any Capacitor™ stable - zero-to-high ESR
  • 600kHz switching frequency
  • No external compensation
  • Power Good (PG) output
  • Foldback current-limit and "hiccup" mode short-circuit protection
  • Supports safe start-up into pre-biased loads
  • -40°C to +125°C junction temperature range
  • Available in 28-pin 5mm — 6mm QFN package
View More
Overview
Documents
Development Environment
RoHS Information
Add To Cart

Device Overview

Summary

The MIC24053 is a constant-frequency, synchronous buck regulator featuring a unique adaptive on-time control architecture. The MIC24053 operates over an input supply range of 4.5V to 19V and provides a regulated output of up to 9A of output current. The output voltage is adjustable down to 0.8V with a guaranteed accuracy of ±1%, and the device operates at a switching frequency of 600kHz.

Hyper Speed Control™ architecture allows for ultra-fast transient response while reducing the output capacitance and also makes (High VIN)/(Low VOUT) operation possible. This adaptive tON ripple control architecture combines the advantages of fixed-frequency operation and fast transient response in a single device.

The MIC24053 offers a full suite of features to ensure protection of the IC during fault conditions. These include undervoltage lockout to ensure proper operation under power-sag conditions, internal soft-start to reduce inrush current, foldback current limit, "hiccup mode" short-circuit protection, and thermal shutdown. An open-drain Power Good (PG) pin is provided. The 9A Hyper Light Load® part, MIC24054, is also available.

Additional Features
    • Hyper Speed Control™ architecture enables
      • High delta V operation (VIN = 19V and VOUT = 0.8V)
      • Small output capacitance
    • Input voltage range: 4.5V to 19V
    • Output current up to 9A, up to 95% efficiency
    • Adjustable output voltage from 0.8V to 5.5V
    • ±1% feedback accuracy
    • Any Capacitor™ stable - zero-to-high ESR
    • 600kHz switching frequency
    • No external compensation
    • Power Good (PG) output
    • Foldback current-limit and "hiccup" mode short-circuit protection
    • Supports safe start-up into pre-biased loads
    • -40°C to +125°C junction temperature range
    • Available in 28-pin 5mm — 6mm QFN package
Parametrics
Name
Value
Regulator Type
Step Down (Buck)
# of Outputs
1
Input Voltage Range Min (V)
4.5
Input Voltage Range Max (V)
19
Output Voltage Range Min (V)
0.8
Output Voltage Range Max (V)
5.5
Output Current (mA) max
9000
Quiescent Current (mA) typ
0.73
Switching Frequency (kHz)
600
Synchronous Rectifier
Yes
Operating Temp Range
-40 to 125
Vfb (V)
0.8
Duty Cycle Max (%)
0.82
SHUTDOWN Current (µA) (Typ)
5

Documents

Jump to:

Software Library

Development Environment

  • Demo & Evaluation Boards
  • Software Libraries
Demo & Evaluation Boards
MIC24053YJL Evaluation Board
MIC24053YJL Evaluation Board ( MIC24053YJL-EV )

The MIC24053 DC/DC synchronous buck regulator operates over an input supply range of 4.5V to 19V and provides a regulated output at up to 9A of load current. The output voltage is adjustable down to 0.8V with a typical accuracy of ±1%. The device operates at a switching frequency of 600kHz, which remains relatively constant with changes in input voltage and output load. The basic parameters of...

Learn More
Add To Cart
Software Libraries
Analog Simulation - MIC24053

MIC24053 is a constant-frequency, synchronous buck regulator featuring a unique adaptive on-time control architecture. The MIC24053 operates over an input supply range of 4.5V to 19V and provides a...

Learn More

RoHS Information

Part Number
Device Weight (g)
Shipping Weight (grams)
Lead Count
Package Type
Package Width
Solder Composition
JEDEC Indicator
RoHS
China EFUP
MIC24053YJL-TR
0.081600
0.227180
28
VQFN
5x6x0.9mm
NiPdAu
e4
To see a complete listing of RoHS data for this device, please Click here
Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.

Buy from Microchip

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy