Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

MCP16416

PWM Boost Converter with Auto Bypass

Status: Samples Available

Features:

  • Input Voltage Range: 0.8V (after start-up) to 5.25V
  • Programmable Undervoltage Lockout (UVLO)
  • Switching Mode : PWM (500 kHz) / Pulse Skipping
  • Power Good Output
  • Shutdown State : Output Discharge
View More
Overview
Documents
Development Environment
RoHS Information
Add to Cart

Device Overview

Summary

The MCP16416 is a Boost regulator from the MCP1641X family of low quiescent current boost converters with integrated status indicators and wide input voltage range for a variety of battery powered applications. The regulator provides an automatic input-to-output voltage bypass operation which help in optimizing battery utilization and achieving high efficiency while fresh batteries’ nominal voltage is in the same range with the converter’s output value.

The MCP16416 operates in PWM mode switching at 500 kHz. During periods of light load operation, these devices continue to operate at a fixed 500 kHz switching frequency, allowing pulse skipping. The device can be powered by either single-cell, two-cell alkaline/NiMH batteries or single-cell Li-Ion/Li-Polymer batteries. A low-voltage designed architecture allows the regulator to start up without high inrush current or output voltage overshoot from a low input voltage. The start-up voltage is easily programmed by a resistive divider connected to the UVLO pin. If the resistive divider is not used, the default start-up voltage will be 0.85V. The 0.8V built-in UVLOSTOP helps prevent deep discharge of the alkaline battery, which may cause battery leakage. An open-drain Low Battery Output (LBO) pin will warn the user to replace the battery if the input voltage ramps down to the programmed UVLOSTART value.

The MCP16416 includes Power Good Output (PG) which flags a warning signal when the output level drops below 10% of its nominal value – valuable for devices such as personal care products, Bluetooth headsets and toys.

The device also incorporates an output auto-discharge feature. While in shutdown, the device will automatically discharge the output capacitor using an internal switch.

Additional Features
  • Input Voltage Range: 0.8V (after start-up) to 5.25V
  • Automatic Input-to-Output Bypass Operation
  • Programmable Undervoltage Lockout (UVLO)
  • Switching Mode : PWM (500 kHz) / Pulse Skipping
  • Power Good Output
  • 1A Typical Inductor Peak Current Limit
  • Up to 96% Efficiency
  • Adjustable Output Voltage Range
  • Programmable Low Battery Output
  • Shutdown State : Output Discharge
  • Internal Synchronous Rectifier
  • Internal Compensation
  • Inrush Current Limiting and Internal Soft Start
  • Anti-Ringing Control
  • Thermal Shutdown
  • Available Packages:
    • 10-lead MSOP
    • 10-lead 3 mm x 3 mm TDFN
Parametrics
Name
Value
Regulator Type
Step Up (Boost)
# of Outputs
1
Input Voltage Range Min (V)
0.8
Input Voltage Range Max (V)
5.25
Output Voltage Range Min (V)
1.8
Output Voltage Range Max (V)
5.25
Switching Frequency (kHz)
500
Synchronous Rectifier
Yes
Operating Temp Range
-40 to +85
Vfb (V)
0.97
Switch current (A) typ
1

Documents

Jump to:

Data Sheets

Development Environment

  • Integrated Development Environments
Integrated Development Environments
ADM00867
MCP16411 Low Voltage Boost Converter ( ADM00867 )

The MCP1641X is a compact, high-efficiency, fixed frequency, low-voltage, synchronous step-up DC-DC converter with battery monitoring features. It provides an easy-to-use power supply solution for applications over a wide range of inputs: single-cell, two-cell, alkaline/NiMH batteries or single-cell Li-Ion/Li-Polymer batteries can be used. With the 1A Typical Peak Input Current Limit, MCP1641X can...

Learn More

RoHS Information

Part Number
Device Weight (g)
Shipping Weight (Kg)
Lead Count
Package Type
Package Dimension
Solder Composition
JEDEC Indicator
RoHS
China EFUP
MCP16416-I/UN
0.023200
0.060000
10
MSOP
3x3mm
Matte Tin
e3
MCP16416T-I/UN
0.023200
0.200000
10
MSOP
3x3mm
Matte Tin
e3
MCP16416-I/MN
0.021000
0.041667
10
TDFN
3x3x0.8mm
Matte Tin
e3
MCP16416T-I/MN
0.021000
0.228788
10
TDFN
3x3x0.8mm
Matte Tin
e3
To see a complete listing of RoHS data for this device, please Click here
Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.

Buy from Microchip

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy