Video series: https://www.youtube.com/playlist?list=PL9B4edd-p2ajA6AZZgxWPZl2w3taatg21 Training manual: https://mchp.us/3ih1FPt Source code: http://mchp.us/2LKqwz9 Learn More about the ATtiny1627 Family of Microcontrollers: https://mchp.us/3suZqgn Hardware: ATtiny1627 Curiosity Nano: http://mchp.us/3slimxV Curiosity Nano Base for Click boards™: http://mchp.us/2LKDFbi Force Click board: http://mchp.us/39y1JX2 Software: Microchip Studio: http://mchp.us/3nNmUd2 MPLAB® Data Visualizer: http://mchp.us/38DVDFi This is the second of six videos in the Getting Started with the 12-bit differential ADC and PGA of the ATtiny1627 family (of microcontrollers) training series. In this assignment, the ADC on the ATtiny1627 will be configured in Burst Accumulation and Series Accumulation conversion mode. The Force Click is used to create an input signal to the ADC and the recorded values are transmitted over USART to the MPLAB Data Visualizer. The conversion will be triggered by an RTC overflow event and the ATtiny1627 will be configured to go to sleep between samples to save power. For more 8-bit PIC® and AVR MCU info, visit https://www.microchip.com/design-centers/8-bit