Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes

KSZ8462HLI EVAL BOARD

Part Number: KSZ8462HLI-EVAL

Status: No Longer Available

Summary:

The KSZ8462HL Evaluation Board provides a platform in which to test or explore the functionally of the KSZ8462HL IEEE 1588 Precision Time Protocol (PTP) enabled switch products. The KSZ8462HL and KSZ8462FHL devices are highly integrated 2-port 10BASE-T / 100BASE-TX/FX managed Ethernet switches with generic parallel host interface connectivity to a host on Port 3. This is the ideal solution in View More

Thank you for your request. We will reply back with quotation as soon as possible! If you have any questions in the meantime, feel free to contact us here .

Documents and Software
Overview
Features
Additional Resources
Related Tools

Additional resources data currently not available.

Documents and Software

×

Documents

Ethernet Utility Software v1.25
6/12/2017
1MB
KSZ8462HL_eval_bd_user_guide_1.0
10/16/2015
398KB
KSZ8462-8441-8852_eval_bd_v1.2_schematic
10/16/2015
102KB
KSZ8462-8441_eval_bd_v1.1_schematic
10/16/2015
154KB
KSZ8462-8441_eval_bd_v1.0_BOM
10/16/2015
58KB
KSZ8462 software tools
10/15/2015
10B
KSZ8462 Schematics
10/15/2015
1MB
KSZ8462_eval_bd_v1.2_gerber
10/15/2015
1MB
KSZ8462_eval_bd_v1.0_gerber
10/15/2015
2MB
KSZ8462 Layouts
10/15/2015
850KB
ANLAN207_Management_Interfaces
10/15/2015
171KB
ANLAN205_KSZ84xx_Power_Reset_Reqs
10/15/2015
260KB

Product Features

    • KSZ8462HL Integrated 3-Port 10/100 Managed Ethernet Switch
    • Fully compatible with the KSZ8462FHL
    • Two Ethernet LAN Interfaces with RJ-45 jacks and isolation magnetics (Port 1 & 2)
    • Auto MDI/MDI-X for automatic detection and correction for straight-through and crossover cables
    • Generic 8/16 bit parallel Host processor interface (Port 3)
    • Provisioning for two 100BASE-FX fiber interfaces (optional)
    • Provisioning for line side and chip side over-voltage protection (optional)
    • On-board 3.3V and 1.8V/2.5V regulators
    • Configurable for VDDIO of 3.3V, 2.5V, or 1.8V operation
    • Serial port interface for EEPROM
    • LED indicators for link status and activity of the RJ-45 ports
    • On-board 25 MHz crystal
    • Jumpers for power up configuration of the device
    • Jumpers for GPIO pins, I/O voltage selection and serial-port connections
    • 5V DC voltage required for operation
    • Reset switch
    • Various test points

There are currently no related tools to display.

Summary

The KSZ8462HL Evaluation Board provides a platform in which to test or explore the functionally of the KSZ8462HL IEEE 1588 Precision Time Protocol (PTP) enabled switch products. The KSZ8462HL and KSZ8462FHL devices are highly integrated 2-port 10BASE-T / 100BASE-TX/FX managed Ethernet switches with generic parallel host interface connectivity to a host on Port 3. This is the ideal solution in industrial applications where real time clock synchronization using Ethernet connectivity across a network is desired. The KSZ8462HL includes all the functions of a 10/100BASE-T/TX/FX switch system that combines switch engine, frame buffers management, addresses look-up table, queue management, MIB counters, media access controllers (MAC) and PHY transceiver interfaces. The KSZ8462HL is fully compliant with the IEEE 1588 (Version 2) Precision Time Protocol and IEEE 802.3 standards (10BASE-T and 100BASE-TX/FX). This KSZ8462HL Evaluation Board User Guide provides the information necessary to configure and set up the board to evaluate or test the KSZ8462HL devices in different environments.