Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

PIC32MX370F512L

Status: In Production

Features:

  • 120 MHz/150 DMIPS, MIPS32® M4K® core
  • Two I2S/SPI modules for Codec and serial communications
  • Peripheral Pin Select (PPS) functionality
  • Parallel Master Port (PMP) for graphics interfaces
  • Charge Time Measurement Unit (CTMU)
  • Temperature Range - 40°C to 105°C
  • Operating voltage range of 2.3V to 3.6V
  • 512KB Flash memory (plus an additional 12 KB of Boot Flash)
  • 128KB SRAM memory
  • MIPS16e® mode for up to 40% smaller code size
  • Pin-compatible with most Microchip 16-bit devices
  • Low-power management modes (Idle and Sleep)
  • Peripheral Pin Select (PPS) functionality
  • Up to 4 channels of hardware DMA with automatic data size detection
  • Five UARTs and two I2C™ modules
  • Hardware Real-Time Clock and Calendar (RTCC)
  • Five 16-bit Timers/Counters (two 16-bit pairs combine to create two 32-bit timers)
  • Five Capture inputs and Five Compare/PWM outputs
  • External graphics interface with up to 34 PMP pins
  • Audio data communication: I2S, LJ, RJ, USB
  • Audio data control interface: SPI and I2C™
  • Generation of fractional clock frequencies
  • Can be synchronized with USB clock
  • Can be tuned in run-time
  • Supports mTouch™ capacitive touch sensing
  • Provides high-resolution time measurement (1 ns)
  • On-chip temperature measurement capability
  • 10-bit 1Msps rate with one Sample and Hold (S&H)
  • Up to 28 analog inputs
  • Can operate during sleep mode
  • Two dual-input Comparator modules
  • Programmable references with 32 voltage points
  • In-circuit and in-application programming
  • 4-wire MIPS® Enhanced JTAG interface
  • Unlimited program and six complex data breakpoints
  • IEEE 1149.2-compatible (JTAG) boundary scan
View More
Overview
Documents
Development Environment
Similar Devices
RoHS Information
Add To Cart

Device Overview

Summary

                                                                                          

Additional Features

    Key Features

    • 120 MHz/150 DMIPS, MIPS32® M4K® core
    • Two I2S/SPI modules for Codec and serial communications
    • Peripheral Pin Select (PPS) functionality
    • Parallel Master Port (PMP) for graphics interfaces
    • Charge Time Measurement Unit (CTMU)
    • Temperature Range - 40°C to 105°C

    Microcontroller Features

    • Operating voltage range of 2.3V to 3.6V
    • 512KB Flash memory (plus an additional 12 KB of Boot Flash)
    • 128KB SRAM memory
    • MIPS16e® mode for up to 40% smaller code size
    • Pin-compatible with most Microchip 16-bit devices
    • Low-power management modes (Idle and Sleep)

    Peripheral Features

    • Peripheral Pin Select (PPS) functionality
    • Up to 4 channels of hardware DMA with automatic data size detection
    • Five UARTs and two I2C™ modules
    • Hardware Real-Time Clock and Calendar (RTCC)
    • Five 16-bit Timers/Counters (two 16-bit pairs combine to create two 32-bit timers)
    • Five Capture inputs and Five Compare/PWM outputs

    Audio/Graphics/Touch HMI Features

    • External graphics interface with up to 34 PMP pins
    • Audio data communication: I2S, LJ, RJ, USB
    • Audio data control interface: SPI and I2C™
    • Audio data master clock:
      • Generation of fractional clock frequencies
      • Can be synchronized with USB clock
      • Can be tuned in run-time
    • Charge Time Measurement Unit (CTMU):
      • Supports mTouch™ capacitive touch sensing
      • Provides high-resolution time measurement (1 ns)
      • On-chip temperature measurement capability

    Advanced Analog Features

    • ADC Module:
      • 10-bit 1Msps rate with one Sample and Hold (S&H)
      • Up to 28 analog inputs
      • Can operate during sleep mode
    • Comparators:
      • Two dual-input Comparator modules
      • Programmable references with 32 voltage points

    Debugger Development Support

    • In-circuit and in-application programming
    • 4-wire MIPS® Enhanced JTAG interface
    • Unlimited program and six complex data breakpoints
    • IEEE 1149.2-compatible (JTAG) boundary scan
    Parametrics
    Name
    Value
    Part Family
    PIC32MX3xx
    Max CPU Speed MHz
    120
    Program Memory Size (KB)
    512
    SRAM (KB)
    128
    Auxiliary Flash (KB)
    12
    Temperature Range (C)
    -40 to 105
    Operating Voltage Range (V)
    2.3 to 3.6
    Direct Memory Access Channels
    4
    SPI
    2
    I2C
    2
    CODEC Interface (I2S,AC97)
    Yes
    Peripheral Pin Select / Pin Muxing
    Yes
    CTMU test
    Yes
    ADC Input
    28
    Max ADC Resolution (Bits)
    10
    Max ADC Sampling Rate (ksps)
    1000
    Input Capture
    5
    Standalone Output Compare/Standard PWM
    5
    Max 16-bit Digital Timers
    5
    Parallel Port
    PMP
    Number of Comparators
    2
    Internal Oscillator
    8 MHz, 32 kHz
    Hardware RTCC/RTC
    Yes
    Max I/O Pins
    85
    Pincount
    100

    Documents

    Jump to:

    Programming Specifications

    Application Notes

    Download All

    Reference Manuals

    Download All

    Software Tools

    acd6a709ece1693500cee971357443ca6cf7d6131d73cbce71825339c0419c27
      
    980980KB
    0aa76c8bba9e99c601da9743c068289c63b70d0e060e74edb10099bf7ad2fa4e
      
    870030KB
    57b6cecfcb1e7f4e41046602efaf120d3030178576518ab69403da03b0c58c63
      
    1063439KB

    Development Environment

    • Integrated Development Environments
    • Compilers
    • Software & Configurators
    • Emulators & Debuggers
    • Programmers
    • Demo & Evaluation Boards
    • Software Libraries
    • Code Examples
    Integrated Development Environments
    MPLAB-X-IDE
    MPLAB X Integrated Development Environment (IDE) ( MPLAB-X-IDE )

    MPLAB® X Integrated Development Environment (IDE) is an expandable, highly configurable software program that incorporates powerful tools to help you discover, configure, develop, debug and qualify embedded designs for most of Microchip’s microcontrollers, microprocessors and digital signal controllers.
    MPLAB X IDE works seamlessly with the MPLAB development ecosystem of

    ...

    Learn More
    Compilers
    MPLAB-XC32
    MPLAB XC32 Compiler ( MPLAB-XC32 )

    Available as free, unrestricted-use downloads, our award-winning MPLAB® XC C Compilers are comprehensive solutions for your project’s software development. Finding the right compiler to support your device is simple:

    MPLAB XC8 supports all 8-bit PIC® and AVR® microcontrollers (MCUs)
    MPLAB XC16 supports all 16-bit PIC MCUs and dsPIC® Digital Signal...

    Learn More
    Software & Configurators
    MPLAB Harmony v3
    MPLAB® Harmony v3 ( MPLAB Harmony v3 )

    MPLAB® Harmony v3 is a fully integrated embedded software development framework that provides flexible and inter-operable software modules to simplify the development of value-added features for 32-bit MCUs and MPUs. It includes the MPLAB Harmony Configurator (MHC) tool, an easy-to-use tool with a GUI that simplifies device setup, library selection, configuration and...

    Learn More
    Emulators & Debuggers
    MPLAB PICkit 4 In-Circuit Debugger
    MPLAB PICkit 4 In-Circuit Debugger ( PG164140 )

    Shipments of the MPLAB\\® PICkit 4 In-Circuit Debugger were temporarily suspended due to the coronavirus shutdown in China. We expect them to resume in the next month. If you require an MPLAB debugger/programmer immediately, we are offering 50% off an MPLAB ICD 4 In-Circuit Debugger. Use code ICD4PROMO at

    ...

    Learn More
    Add To Cart
    MPLAB ICD 4 In-Circuit Debugger
    MPLAB ICD 4 In-Circuit Debugger ( DV164045 )

    The MPLAB® ICD 4 In-Circuit Debugger/Programmer is Microchip’s fastest, cost-effective debugging and programming tool for PIC® and SAM Microcontrollers (MCUs), dsPIC® Digital Signal Controllers (DSCs), and CEC flash microcontrollers. This speed is provided by a SAME70 MCU with 300 MHz, 32-bit MCU with 2MB of RAM and a high-speed FPGA to yield

    ...

    Learn More
    Add To Cart
    MPLAB(R) Snap In-Circuit Debugger
    MPLAB(R) Snap In-Circuit Debugger ( PG164100 )

    Our most affordable debugger has power to impress.

    The MPLAB® Snap In-Circuit Debugger/Programmer allows affordable, fast and easy debugging and programming of PIC®, dsPIC®, AVR and SAM flash MCUs, using the powerful graphical user interface of MPLAB X Integrated Development Environment (IDE) version 5.05 or later. The MPLAB Snap can be connected to a computer using a

    ...

    Learn More
    Add To Cart
    J-32 Debug Probe
    J-32 Debug Probe ( DV164232 )

    The J-32 Debug Probe Debugger/Programmer provides affordable, fast and easy debugging and programming for Microchip’s PIC32 and SAM MCU and MPU products. Plus, SEGGER offers free, stand-alone applications to extend J-32 Debug Probe functionality:

    J-32 Debug Probe is fully integrated into Microchip’s powerful MPLAB® X Integrated Development Environment and

    ...

    Learn More
    Add To Cart
    Programmers
    MPLAB PICkit 4 In-Circuit Debugger
    MPLAB PICkit 4 In-Circuit Debugger ( PG164140 )

    Shipments of the MPLAB\\® PICkit 4 In-Circuit Debugger were temporarily suspended due to the coronavirus shutdown in China. We expect them to resume in the next month. If you require an MPLAB debugger/programmer immediately, we are offering 50% off an MPLAB ICD 4 In-Circuit Debugger. Use code ICD4PROMO at

    ...

    Learn More
    Add To Cart
    MPLAB ICD 4 In-Circuit Debugger
    MPLAB ICD 4 In-Circuit Debugger ( DV164045 )

    The MPLAB® ICD 4 In-Circuit Debugger/Programmer is Microchip’s fastest, cost-effective debugging and programming tool for PIC® and SAM Microcontrollers (MCUs), dsPIC® Digital Signal Controllers (DSCs), and CEC flash microcontrollers. This speed is provided by a SAME70 MCU with 300 MHz, 32-bit MCU with 2MB of RAM and a high-speed FPGA to yield

    ...

    Learn More
    Add To Cart
    MPLAB PM3 Universal Device Programmer
    MPLAB PM3 Universal Device Programmer ( DV007004 )

    The MPLAB® PM3 Universal Device Programmer is easy to use and operates with a PC or as a stand-alone unit, and programs Microchip's entire line of PIC® devices as well as the latest dsPIC® DSC devices. When used standalone, data can be loaded and saved with the SD/MMC card (not included).

    • Socket: AC164323   PartNo: PIC32MX370F512L (100PF)
    • Socket: AC164333   PartNo: PIC32MX370F512L (100PT)
    • Socket: AC164418   PartNo: PIC32MX370F512L (124TL)
    Learn More
    Add To Cart
    MPLAB(R) Snap In-Circuit Debugger
    MPLAB(R) Snap In-Circuit Debugger ( PG164100 )

    Our most affordable debugger has power to impress.

    The MPLAB® Snap In-Circuit Debugger/Programmer allows affordable, fast and easy debugging and programming of PIC®, dsPIC®, AVR and SAM flash MCUs, using the powerful graphical user interface of MPLAB X Integrated Development Environment (IDE) version 5.05 or later. The MPLAB Snap can be connected to a computer using a

    ...

    Learn More
    Add To Cart
    J-32 Debug Probe
    J-32 Debug Probe ( DV164232 )

    The J-32 Debug Probe Debugger/Programmer provides affordable, fast and easy debugging and programming for Microchip’s PIC32 and SAM MCU and MPU products. Plus, SEGGER offers free, stand-alone applications to extend J-32 Debug Probe functionality:

    J-32 Debug Probe is fully integrated into Microchip’s powerful MPLAB® X Integrated Development Environment and

    ...

    Learn More
    Add To Cart
    Demo & Evaluation Boards
    PIC32 I/O Expansion Board
    PIC32 I/O Expansion Board ( DM320002 )

    The Starter Kit I/O Expansion Board provides Starter Kit and Starter Board users with full access to MCU signals, additional debug headers, and connection of PICtail Plus daughter cards. MCU signals are available for attaching prototype circuits or monitoring signals with logic probes. Headers are provided for connecting JTAG tools or Microchip tools using the 2-wire (ICSP) interface....

    Learn More
    Add To Cart
    PIC32 USB Starter Kit III
    PIC32 USB Starter Kit III ( DM320003-3 )

    The PIC32 USB starter kit – III provides the user with an easy and cost effective option to experience the USB, mTouch and SPI/I2S functionality of the new PIC32MX3/MX4 microcontrollers. The board comes equipped with everything that is needed including Microchip’s free USB software to develop USB embedded host/device/OTG applications.

    The PIC32 USB starter kit - III

    ...

    Learn More
    Add To Cart
    PIC32 Bluetooth Audio Development Kit
    PIC32 Bluetooth Audio Development Kit ( DV320032 )
    (Not Recommended for new design)

    The PIC32 Bluetooth® Audio Development Kit provides a comprehensive solution to develop Bluetooth A2DP audio streaming solutions and applications. The board is coupled with two daughter cards: the Bluetooth HCI Radio Daughter Card that demonstrates a low cost Bluetooth implementation and the Audio DAC Daughter Card that demonstrates a high quality 16/24-bit, 32-192 KHz audio...

    Learn More
    Add To Cart
    PIC32MX450/470 100-pin to 100-pin USB PIM
    PIC32MX450/470 100-pin to 100-pin USB PIM ( MA320002-2 )

    Processor Plug-In Modules are small circuit boards to be used with the various Microchip Development Boards to evaluate various MCU families. These plug into the main processor socket of the Development Boards so that different microcontrollers can be used for prototyping, demonstration or development --quickly and easily.

    The capabilities of PIC32MX3/MX4 family of devices can be

    ...

    Learn More
    Add To Cart
    Software Libraries
    ADPCM and Speex (Audio) Library for PIC32 MCUs

    AAC Decoder Libraries for PIC32MX for MLA based

    Advanced Audio Coding (AAC) is a standardized lossy compression technique used for encoding digital audio...

    Learn More
    Microchip Certified Class B Safety Software Library for 16 bit & PIC32 MCUs

    Learn More
    PIC32 Peripheral Library

    Summary

    The PIC32 Peripheral Library provides a set of functions for setting up and controlling the operation of all the peripheral modules available in the PIC32 devices. The...

    Learn More
    Smart Card ISO-7816 Library for PIC18F, PIC24/dsPIC and PIC32 Microcontrollers


    Microchip’s smart card library supports PIC18, PIC24, dsPIC and PIC32 microcontrollers; it provides the

    ...

    Learn More

    Similar Devices

    Product
    Pins
    Flash (KB)
    RAM (B)
    Price 5K
    Notes
    64
    32
    8,192
    $3.09
     
    64
    64
    16,384
    $3.36
     
    64
    128
    32,768
    $3.57
     
    100
    128
    32,768
    $4.21
     
    64
    64
    16,384
    $2.45
     
    100
    64
    16,384
    $2.85
     
    64
    128
    32,768
    $3.77
     
    100
    128
    32,768
    $4.21
     
    64
    256
    65,536
    $3.88
     
    64
    512
    131,072
    $4.06
     
    64
    128
    32,768
    $2.77
     
    100
    128
    32,768
    $3.22
     
    64
    256
    65,536
    $3.51
     
    100
    256
    65,536
    $3.93
     
    100
    256
    65,536
    $4.31
     
    100
    512
    131,072
    $4.47
     
    64
    512
    131,072
    $4.33
     
    100
    512
    131,072
    $4.75
     

    RoHS Information

    Part Number
    Device Weight (g)
    Shipping Weight (Kg)
    Lead Count
    Package Type
    Package Width
    Solder Composition
    JEDEC Indicator
    RoHS
    China EFUP
    PIC32MX370F512L-I/TL
    0.177500
    0.325000
    124
    VTLA
    9x9x0.9mm
    NiPdAu
    e4
    PIC32MX370F512LT-I/TL
    0.177500
    0.331515
    124
    VTLA
    9x9x0.9mm
    NiPdAu
    e4
    PIC32MX370F512LT-V/TL
    0.177500
    0.331515
    124
    VTLA
    9x9x0.9mm
    NiPdAu
    e4
    PIC32MX370F512L-V/TL
    0.177500
    0.325000
    124
    VTLA
    9x9x0.9mm
    NiPdAu
    e4
    PIC32MX370F512L-I/PF
    0.497000
    2.333333
    100
    TQFP
    14x14x1mm
    Matte Tin
    e3
    PIC32MX370F512L-I/PT
    0.391000
    1.596639
    100
    TQFP
    12x12x1mm
    Matte Tin
    e3
    PIC32MX370F512LT-I/PF
    0.497000
    1.199000
    100
    TQFP
    14x14x1mm
    Matte Tin
    e3
    PIC32MX370F512LT-I/PT
    0.391000
    1.333333
    100
    TQFP
    12x12x1mm
    Matte Tin
    e3
    PIC32MX370F512LT-V/PF
    0.497000
    1.199000
    100
    TQFP
    14x14x1mm
    Matte Tin
    e3
    PIC32MX370F512LT-V/PT
    0.391000
    1.333333
    100
    TQFP
    12x12x1mm
    Matte Tin
    e3
    PIC32MX370F512L-V/PF
    0.497000
    2.333333
    100
    TQFP
    14x14x1mm
    Matte Tin
    e3
    PIC32MX370F512L-V/PT
    0.391000
    1.596639
    100
    TQFP
    12x12x1mm
    Matte Tin
    e3
    To see a complete listing of RoHS data for this device, please Click here
    Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.

    Buy from Microchip

    Grid
    View
    Table
    View
    Filter:
    Apply
    Clear
    Only show products with samples
    Product
    Leads
    Package Type
    Temp Range
    Packing Media
    5K Pricing
    Buy