Microchip logo
  • All
  • Products
  • Documents
  • Applications Notes
product primary image

LAN91C96I

Non-PCI Ethernet Controller

Status: In Production

Features:

  • Non-PCI Single-Chip Ethernet Controller
  • Fully Supports Full Duplex Switched Ethernet
  • Supports Enhanced Transmit Queue Management
  • 6K Bytes of On-Chip RAM
  • Supports IEEE 802.3 (ANSI 8802-3) Ethernet Standards
  • Automatic Detection of TX/RX Polarity Reversal
  • Enhanced Power Management Features
  • Supports "Magic Packet" Power Management Technology
  • Hardware Memory Management Unit
  • Optional Configuration via Serial EEPROM Interface (Jumperless)
  • Supports Single 5V or 3.3V VCC Design
  • Industrial Temperature Range of -40° to 85° C
  • Supports Mixed Voltage External PHY Designs
  • Low Power CMOS Design
  • 100 Pin QFP and TQFP RoHS Compliant Packages (1.0mm Body Thickness)
  • Pin Compatible with the LAN91C92 and LAN91C94
  • Direct Interface to Local Bus with No Wait States
  • Flexible Bus Interface
  • 16 Bit Data and Control Paths
  • Fast Access Time
  • Pipelined Data Path
  • Handles Block Word Transfers for Any Alignment
  • High Performance Chained ("Back-to-Back") Transmit and Receive
  • Pin Compatible with the LAN91C92 and the LAN91C94 in Local Bus Mode
  • Dynamic Memory Allocation Between Transmit and Receive
  • Flat Memory Structure for Low CPU Overhead
  • Buffered Architecture, Insensitive to Bus Latencies (No Overruns/Underruns)
  • Supports Boot PROM for Diskless Local Bus Applications
  • Driver and Receiver
  • Link Integrity Test
  • Receive Polarity Detection and Correction
  • Integrated AUI Interface
  • 10 Mb/s Manchester Encoding/Decoding and Clock Recovery
  • Automatic Retransmission, Bad Packet Rejection, and Transmit Padding
  • External and Internal Loopback Modes
  • Four Direct Driven LED Outputs for Status/Diagnostics
  • LAN9000 Drivers for Major Network Operating Systems Utilizing Local Bus Interface
  • Software Drivers Compatible with the LAN91C92, LAN91C94, LAN91C100FD (100 Mbps), and LAN91C110 (100 Mb/s) Controllers in Local Bus Mode
  • Software Drivers Utilize Full Capability of 32 Bit Microprocessor
View More
Overview
Documents
Development Environment
RoHS Information
Add To Cart

Device Overview

Summary


*The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

Additional Features

    Features

    • Non-PCI Single-Chip Ethernet Controller
    • Fully Supports Full Duplex Switched Ethernet
    • Supports Enhanced Transmit Queue Management
    • 6K Bytes of On-Chip RAM
    • Supports IEEE 802.3 (ANSI 8802-3) Ethernet Standards
    • Automatic Detection of TX/RX Polarity Reversal
    • Enhanced Power Management Features
    • Supports "Magic Packet" Power Management Technology
    • Hardware Memory Management Unit
    • Optional Configuration via Serial EEPROM Interface (Jumperless)
    • Supports Single 5V or 3.3V VCC Design
    • Industrial Temperature Range of -40° to 85° C
    • Supports Mixed Voltage External PHY Designs
    • Low Power CMOS Design
    • 100 Pin QFP and TQFP RoHS Compliant Packages (1.0mm Body Thickness)
    • Pin Compatible with the LAN91C92 and LAN91C94

    Bus Interface

    • Direct Interface to Local Bus with No Wait States
    • Flexible Bus Interface
    • 16 Bit Data and Control Paths
    • Fast Access Time
    • Pipelined Data Path
    • Handles Block Word Transfers for Any Alignment
    • High Performance Chained ("Back-to-Back") Transmit and Receive
    • Pin Compatible with the LAN91C92 and the LAN91C94 in Local Bus Mode
    • Dynamic Memory Allocation Between Transmit and Receive
    • Flat Memory Structure for Low CPU Overhead
    • Buffered Architecture, Insensitive to Bus Latencies (No Overruns/Underruns)
    • Supports Boot PROM for Diskless Local Bus Applications

    Network Interface

    • Integrated 10BASE-T Transceiver Functions:
      • Driver and Receiver
      • Link Integrity Test
      • Receive Polarity Detection and Correction
    • Integrated AUI Interface
    • 10 Mb/s Manchester Encoding/Decoding and Clock Recovery
    • Automatic Retransmission, Bad Packet Rejection, and Transmit Padding
    • External and Internal Loopback Modes
    • Four Direct Driven LED Outputs for Status/Diagnostics

    Software Drivers

    • LAN9000 Drivers for Major Network Operating Systems Utilizing Local Bus Interface
    • Software Drivers Compatible with the LAN91C92, LAN91C94, LAN91C100FD (100 Mbps), and LAN91C110 (100 Mb/s) Controllers in Local Bus Mode
    • Software Drivers Utilize Full Capability of 32 Bit Microprocessor

    {popup:id=271;timer=86400}

Documents

Jump to:

Development Environment

  • Software Libraries
Software Libraries
LAN9000 Diagnostic and Setup Utilities (ETX, ISMC9000, MIIPHY, CIS and ENABLERS

LAN9000 Diagnostic and Setup Utilities (ETX, ISMC9000, MIIPHY, CIS and ENABLERS

Learn More
LAN9000 FreeBSD Unix Drivers. ISA Adapters. Source Code tar-gzipped

LAN9000 FreeBSD Unix Drivers. ISA Adapters. Source Code tar-gzipped

Learn More
LAN9000 ISA and PCMCIA Drivers for Windows CE 2.1x for x86 Processor - v1.30

LAN9000 ISA and PCMCIA Drivers for Windows CE 2.1x for x86 Processor - v1.30

Learn More
LAN9000 Linux Drivers. PCMCIA Adapters. Source Code tared

LAN9000 Linux Drivers. PCMCIA Adapters. Source Code tared

Learn More
LAN9000 NDIS2 Drivers for DOS/Win3.X and OS2. ISA, FEAST, PCMCIA Single and Dual Function Adapters

LAN9000 NDIS2 Drivers for DOS/Win3.X and OS2. ISA, FEAST, PCMCIA Single and Dual Function Adapters

Learn More
LAN9000 NDIS3 and NDIS4 Drivers for Win95/Win98/WinNT/Win2k. ISA, FEAST, PCMCIA Single and Dual Function Adapters

LAN9000 NDIS3 and NDIS4 Drivers for Win95/Win98/WinNT/Win2k. ISA, FEAST, PCMCIA Single and Dual Function Adapters

Learn More
LAN9000 Netware Server (2.X, 3.X, 4.X), DOS/Win3.X and OS/2 Netware Clients. ISA, FEAST, PCMCIA Single and Dual Function Adapter

LAN9000 Netware Server (2.X, 3.X, 4.X), DOS/Win3.X and OS/2 Netware Clients. ISA, FEAST, PCMCIA Single and Dual Function Adapter

Learn More
LAN9000 SCO Unix Drivers. ISA Adapters. Source Code tared

LAN9000 SCO Unix Drivers. ISA Adapters. Source Code tared

Learn More
LAN9000 StrongARM NDIS4 for Windows CE 3.0

LAN9000 StrongARM NDIS4 for Windows CE 3.0

Learn More
LAN91C96 x86 Windows CE .NET Driver

LAN91C96 x86 Windows CE .NET Driver

Learn More
Linux Drivers

Linux Drivers

Learn More
SRC-9000 Source Code

SRC-9000 Source Code

Learn More
SRC-9000-CE Source Code

SRC-9000-CE Source Code

Learn More
SRC-9000-CENET86 Source Code

SRC-9000-CENET86 Source Code

Learn More
SRC-9000-CENETSA Source Code

SRC-9000-CENETSA Source Code

Learn More
SRC-9000-ODI Source Code

SRC-9000-ODI Source Code

Learn More

RoHS Information

Part Number
Device Weight (g)
Shipping Weight (Kg)
Lead Count
Package Type
Package Width
Solder Composition
JEDEC Indicator
RoHS
China EFUP
LAN91C96I-MU
0.497000
2.333333
100
TQFP
14x14x1mm
Matte Tin
e3
LAN91C96I-MS
1.689400
4.696970
100
QFP
14x20x2.7
Matte Tin
e3
To see a complete listing of RoHS data for this device, please Click here
Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.

Buy from Microchip

Grid
View
Table
View
Filter:
Apply
Clear
Only show products with samples
Product
Leads
Package Type
Temp Range
Packing Media
5K Pricing
Buy