Available as free, unrestricted-use downloads, our award-winning MPLAB® XC C Compilers are comprehensive solutions for your project’s software development. Finding the right compiler to support your device is simple:
MPLAB XC8 supports all 8-bit PIC® and AVR® microcontrollers (MCUs)
MPLAB XC16 supports all 16-bit PIC MCUs and dsPIC® Digital Signal...
The AVR® Toolchain is a collection of tools/libraries used to create applications for AVR microcontrollers. This collection includes compiler, assembler, linker and Standard C and math libraries.
Most of these tools are based on efforts from GNU (www.gnu.org), and some are developed by Microchip. For more information please refer to the release notes.
The Atmel...
BNO055 Xplained Pro is an extension with the Bosch BNO055 Intelligent 9-axis absolute orientation sensor and a RGB LED. It connects to the extension headers of any Xplained Pro evaluation kit.
The ATBNO055-XPRO extension kit does not include a Xplained Pro evaluation kit.
Getting started user guide from Bosch is available
...
The ATBTLC1000-XPRO-ADPT is an adapter board for the ATBTLC1000-XPRO expansion board. It is required for the UART hardware flow control functionality to operate correctly when the ATBTLC1000-XPRO expansion board is connected to certain Xplained MCU base boards.
The BTLC1000XPRO-ADP adapter board supports the SMART SAM L21 Xplained Pro, SAM D21 Xplained Pro, SAM 4S Xplained Pro and
...
PROTO1 Xplained Pro provides easy prototyping on the Xplained Pro platform. It connects to the extension headers of any Xplained Pro evaluation kit and can be used as a gateway to other Xplained Pro extension boards with its own Xplained Pro extension header.
QT1 Xplained Pro kit is an extension kit that enables evaluation of self- and mutual capacitance mode using the Peripheral Touch Controller(PTC). The kit shows how easy it is to design a capacitive touch board solution using the PTC without the need for any external components. The kit includes two boards, one using self-capacitance and one using mutual capacitance.
If you want to
...
QT3 Xplained Pro is a QTouch keypad extension board demonstrating an ultra-low power keypad design using the Peripheral Touch Controller (PTC). Utilizing the PTCs low power capabilities it enables markets lowest power wake-up on touch.
Note: QT3 Xplained Pro requires a compatible Xplained Pro evaluation kit. See the Related Tools tab for supported models.
The QT4 Xplained Pro kit is an extension board that enables evaluation of self-capacitance Touch and Proximity sensors using the Peripheral Touch Controller (PTC). The kit shows how easy it is to design a capacitive touch board solution using the PTC without the need for any external components.
The SAM D20 Xplained Pro evaluation kit is ideal for evaluation and prototyping with the SAM D20 Cortex®-M0+ processor-based microcontrollers. Xplained Pro Extension kits compatible with the SAM D20 Xplained Pro kit can be purchased individually.
The ATSAMD20-XPRO evaluation kit does not include extension boards.
SAM D20 Xplained Pro supports many Xplained Pro extension
...
The ATSAMD21E16LMOTOR is an MCU card for Motor control starter kit - ATSAMxxxBDLCxxx-STK. The hardware has the SMART ARM based MCU, ATSAMD21E16L, with integrated on-board debug support. The MCU card can be directly used with the currently available ATSAMD21BLDC24V-STK, a low voltage BLDC, PMSM motor control starter kit.
The SAM D21 Xplained Pro evaluation kit is ideal for evaluating and prototyping with the SAM D21 ARM® Cortex®-M0+ based microcontrollers. Xplained Pro Extension kits compatible with SAM D21 Xplained Pro can be purchased individually.
The ATSAMD21-XPRO evaluation kit does not include extension boards.
SAM D21 Xplained Pro supports many Xplained Pro extension kits,
...
The SAM DA1 Xplained Pro evaluation kit is ideal for evaluating and prototyping with the SAM DA1 ARM® Cortex®-M0+ based microcontrollers. Extension boards to the SAM DA1 Xplained Pro can be purchased individually.
The ATSAMDA1-XPRO evaluation kit does not include extension boards.
The SAM DA1 Xplained Pro supports the I/O1 Xplained Pro, OLED1 Xplained Pro, QT1 and QT4
...
Routing card for SAM D20 in 64-pin TQFP and QFN socket supplements the STK600 Starter Kit.
For an overview of card combinations and supported devices see Device Support Table
Routing card for SAM D20 in 48-pin TQFP and QFN socket. Supplements the STK600 Starter Kit.
For an overview of card combinations and supported devices see Device Support Table
Routing card for SAM D20 in 32-pin TQFP and QFN socket. Supplements the STK600 Starter Kit.
For an overview of card combinations and supported devices see Device Support Table
Routing card for SAM D21 in 64-pin TQFP and QFN socket. Supplements the STK600 Starter Kit.
For an overview of card combinations and supported devices see Device Support Table
Routing card for SAM D21 in 48-pin TQFP and QFN socket. Supplements the STK600 Starter Kit.
For an overview of card combinations and supported devices see Device Support Table
Routing card for SAM D21 in 32-pin TQFP and QFN socket. Supplements the STK600 Starter Kit.
For an overview of card combinations and supported devices see Device Support Table
Routing card for SAM D10/11 in 24-pin QFN socket. Supplements the STK600 Starter Kit.
For an overview of card combinations and supported devices see Device Support Table
Routing card for SAM D21L in 32-pin QFN or TQFP socket. Supplements the STK600 Starter Kit.
For an overview of card combinations and supported devices see Device Support Table
Socket card for 32-pins QFN 0.5 mm pitch devices. Supplements the STK600 Starter Kit.
For an overview of card combinations and supported devices see Device Support Table
Generic socket card for 24-pins QFN 0.5 mm pitch devices. Supplements the STK600 Starter Kit.
For an overview of card combinations and supported devices see Device Support Table
