• AVR Freaks

How to impliment a menu system in LCD?

Author
Post
Essentials Only Full Version
Serpent
Senior Member
  • Total Posts : 146
  • Reward points : 0
  • Joined: 2007/02/03 06:42:28
  • Location: INDIA
  • Status: offline
2009/09/12 06:43:16 (permalink)
0

How to impliment a menu system in LCD?

Hello
         Please suggest a example, application note or any article which can help me to design a LCD based menu system for my 18F452 based device.

Thanks





Roy Thomas
“Give a man a program, frustrate him for a day.
Teach a man to program, frustrate him for a lifetime.”
Muhammad Waseem
#1

6 Replies Related Threads
    Baron3D
    New Member
    • Total Posts : 18
    • Reward points : 0
    • Joined: 2006/08/29 14:07:36
    • Location: 0
    • Status: offline
    RE: How to impliment a menu system in LCD? 2009/09/12 10:53:02 (permalink)
    0
    An example:
    http://biphome.spray.se/frl_linder/PIC_scope.htm

    Not very easy one.
    #2
    Serpent
    Senior Member
    • Total Posts : 146
    • Reward points : 0
    • Joined: 2007/02/03 06:42:28
    • Location: INDIA
    • Status: offline
    RE: How to impliment a menu system in LCD? 2009/09/12 21:46:50 (permalink)
    0
    Thanks a lot.
    Will see it. Use of Graphical LCD made the system more complicated for me.

    Studying it now.

    Thanks

    Roy Thomas
    “Give a man a program, frustrate him for a day.
    Teach a man to program, frustrate him for a lifetime.”
    Muhammad Waseem
    #3
    dan1138
    Super Member
    • Total Posts : 4244
    • Reward points : 0
    • Joined: 2007/02/21 23:04:16
    • Location: 0
    • Status: offline
    RE: How to impliment a menu system in LCD? 2009/09/13 12:36:32 (permalink)
    0
    The PICDEM2 Plus has an LCD character display.
     
    See: http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en010072
     
    The menu system is a bit simpler.
    #4
    Serpent
    Senior Member
    • Total Posts : 146
    • Reward points : 0
    • Joined: 2007/02/03 06:42:28
    • Location: INDIA
    • Status: offline
    RE: How to impliment a menu system in LCD? 2009/09/14 02:26:07 (permalink)
    0
    here is  some info I have collected for creating menu in embedded systems with LCD.

    http://rapidshare.com/files/279864530/MenuMaterial.zip.html

    or if needed email me
    Thanks
    post edited by PickerRoy - 2009/09/23 02:50:23

    Roy Thomas
    “Give a man a program, frustrate him for a day.
    Teach a man to program, frustrate him for a lifetime.”
    Muhammad Waseem
    #5
    john.dammeyer
    Super Member
    • Total Posts : 425
    • Reward points : 0
    • Joined: 2004/01/02 20:07:06
    • Status: offline
    RE: How to impliment a menu system in LCD? 2009/09/14 08:29:15 (permalink)
    0
    Hi,

    If you are interested in building a kit, you can get an Electronic Lead Screw kit that has an LCD display, 35 buttons, Encoder knob and even a 3A 50V micro-stepper motor driver.  Both RS232 and CAN bus are supported.

    Source code is released via GPL for the PIC18F4685 and includes a complete menu system with soft keys.

    http://www.autoartisans.com/ELS/

    John
    #6
    dejmk
    New Member
    • Total Posts : 1
    • Reward points : 0
    • Joined: 2011/11/29 04:57:54
    • Location: 0
    • Status: offline
    RE: How to impliment a menu system in LCD? 2013/10/29 07:21:57 (permalink)
    0
    Hello PickerRoy,
    I'm also interested in creating multi level menu with 4x20 LCD.
    Can you share with me your collection please,because this link is dead.
    thx
    post edited by dejmk - 2013/10/29 07:23:01
    #7
    Jump to:
    © 2021 APG vNext Commercial Version 4.5