• AVR Freaks

Hot!An MP3 Player using PIC18LF2550

Author
andyolivares
Junior Member
  • Total Posts : 118
  • Reward points : 0
  • Joined: 2006/11/29 07:46:48
  • Location: 0
  • Status: offline
2008/08/03 23:41:44 (permalink)
5 (1)

An MP3 Player using PIC18LF2550

Hi folks:

I recently made an MP3 player using the Microchip's PIC18LF2550 and the VS1011e from VLSI Solutions. I know there's a lot of people asking about a project like this and that's why I created a website explaining the design process and published the schematics and the source code.
Also, the MP3 player supports FAT32 for an SD card and the driver is in the source code that is useful for other projects as well.

So, I'm just inviting everyone to visit the website at http://www.andyolivares.com. You'll find photos, documents explaining the building process, PDFs, and a short video showing the MP3 player in action very soon.

I'm also planning to post some tutorials on how to fabricate homemade PCBs in the near future.

Best regards,

Andy

PS: Sorry if I posted this in the wrong place and please move the thread where it belongs if needed.


#1

9 Replies Related Threads

    Neiwiertz
    Super Member
    • Total Posts : 2094
    • Reward points : 0
    • Joined: 2004/09/01 02:58:52
    • Status: offline
    RE: An MP3 Player using PIC18LF2550 2008/08/04 03:35:16 (permalink)
    +2 (3)
    Good work, additional you can attach your url at your signature check your profile settings

    Flying With --|Explorer 16|HardWare|SoftWare|-- Fav(s) Gallery Lists
    #2
    andyolivares
    Junior Member
    • Total Posts : 118
    • Reward points : 0
    • Joined: 2006/11/29 07:46:48
    • Location: 0
    • Status: offline
    RE: An MP3 Player using PIC18LF2550 2008/08/04 07:46:04 (permalink)
    0
    Thank's for the info. I'll be putting the address at the signature. ;)

    Visit my website: http://www.andyolivares.com
    You might find useful projects and example codes.
    #3
    andyolivares
    Junior Member
    • Total Posts : 118
    • Reward points : 0
    • Joined: 2006/11/29 07:46:48
    • Location: 0
    • Status: offline
    RE: An MP3 Player using PIC18LF2550 2008/08/05 23:41:30 (permalink)
    0
    Hey guys! I finally finished the promised video. So, if you want to view a working MP3 player based on PIC microcontroller, take a look at my website: http://www.andyolivares.com. You can also find useful information that will serve you a starting point to other projects.

    Best regards,

    Andy

    Visit my website: http://www.andyolivares.com
    You might find useful projects and example codes.
    #4
    PuffDally
    New Member
    • Total Posts : 27
    • Reward points : 0
    • Joined: 2007/05/24 08:02:46
    • Location: Cape Town, South Africa
    • Status: offline
    RE: An MP3 Player using PIC18LF2550 2008/08/18 01:31:13 (permalink)
    0
    Hi Andy, great work on the MP3 player!
    I was just wondering if you or anyone else reading this thread, has any information regarding implenting a directory structure using a PIC, so that one can access folders and subfolders on an SD card, using the FAT32 format?

    Specifically, in my application, I am using the PIC18F66J15 and the VS1011E audio codec chip.
    Thanks!
    #5
    DarioG
    Allmächtig.
    • Total Posts : 54081
    • Reward points : 0
    • Joined: 2006/02/25 08:58:22
    • Location: Oesterreich
    • Status: offline
    RE: An MP3 Player using PIC18LF2550 2008/08/27 01:52:39 (permalink)
    0
    Nice work and nice page, Andy!

    GENOVA :D :D ! GODO
    #6
    NewtoXc
    Starting Member
    • Total Posts : 67
    • Reward points : 0
    • Joined: 2013/10/08 00:25:22
    • Location: 0
    • Status: offline
    Re: RE: An MP3 Player using PIC18LF2550 2013/11/25 02:29:14 (permalink)
    0
    Hi Andy,
    i am using Pic18f87j50 for my portable voice recorder and mp3 features.
    please advise me what kind of theory that i should know about it. Regarding to pic controller, i am new to it.
    should i know spi, ccp, sys frequency set up?
     
    #7
    PRWiley
    New Member
    • Total Posts : 22
    • Reward points : 0
    • Joined: 2019/07/04 06:16:51
    • Location: Lewisburg PA USA
    • Status: offline
    Re: RE: An MP3 Player using PIC18LF2550 2019/08/14 08:07:48 (permalink)
    0
    The domain listed expired 7/19. Any updates?

    Peter R. Wiley
    I feel a lot more like I do now than I did when I came in.
    #8
    ric
    Super Member
    • Total Posts : 23598
    • Reward points : 0
    • Joined: 2003/11/07 12:41:26
    • Location: Australia, Melbourne
    • Status: offline
    Re: RE: An MP3 Player using PIC18LF2550 2019/08/14 13:36:07 (permalink)
    +1 (1)
    Wayback machine to the rescue.
    http://www.andyolivares.com/?page_id=6]http://web.archive.org/web/20120912061446/http://www.andyolivares.com/?page_id=6[/link]
    it appears someone hijacked that domain sometime in 2013 before it finally expired.

    I also post at: PicForum
    Links to useful PIC information: http://picforum.ric323.co...opic.php?f=59&t=15
    NEW USERS: Posting images, links and code - workaround for restrictions.
    To get a useful answer, always state which PIC you are using!
    #9
    ric
    Super Member
    • Total Posts : 23598
    • Reward points : 0
    • Joined: 2003/11/07 12:41:26
    • Location: Australia, Melbourne
    • Status: offline
    Re: RE: An MP3 Player using PIC18LF2550 2019/08/14 13:37:58 (permalink)
    +1 (1)
    http://web.archive.org/web/20120912061446/http://www.andyolivares.com/?page_id=6


    I also post at: PicForum
    Links to useful PIC information: http://picforum.ric323.co...opic.php?f=59&t=15
    NEW USERS: Posting images, links and code - workaround for restrictions.
    To get a useful answer, always state which PIC you are using!
    #10
    Jump to:
    © 2019 APG vNext Commercial Version 4.5