• AVR Freaks

Hot!BM64 EVB / Evaluation Board HOWTO

Author
Post
Essentials Only Full Version
NoBit
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2020/11/23 05:28:06
  • Location: 0
  • Status: offline
2020/11/24 08:01:34 (permalink)
4 (1)

BM64 EVB / Evaluation Board HOWTO

Hi all
 
I'm new to this forum and this is my first post here.
I'm using a BM64 EVB and all is working best but there is a message sent by the unit to the speakers assosiated to led flashing that i'm not able to manage.
When in play mode or stand/by the unit activate 2 times the red led and 2 time the blu one and emit 4 tone to the speakers.
 
Do someone knows what is the meaning of?
on the manuals there is no reference to this 
 
thanks a lot to all
 
 
#1

1 Reply Related Threads
    NoBit
    New Member
    • Total Posts : 2
    • Reward points : 0
    • Joined: 2020/11/23 05:28:06
    • Location: 0
    • Status: offline
    Re: BM64 EVB / Evaluation Board HOWTO 2021/01/18 01:12:19 (permalink)
    0
    Hi all
     
    For a newbie like me the BM64 EVB board documentation is not so easy to manage, so I did this "setting label" to show all the board setting. One of the problem was caused from JP33 position not mentioned in any document.
     
    Hope this will help someone in my same situation.
     
    ciao
     
     
    post edited by NoBit - 2021/01/18 03:06:39

    Attached Image(s)

    #2
    Jump to:
    © 2021 APG vNext Commercial Version 4.5