• AVR Freaks

Hot!PIC16F18456 : How to Select Internal 32MHz Frequency with MCC

Author
karan123
Super Member
  • Total Posts : 970
  • Reward points : 0
  • Joined: 2009/02/02 11:11:21
  • Location: 0
  • Status: offline
2020/07/08 09:37:43 (permalink)
2 (1)

PIC16F18456 : How to Select Internal 32MHz Frequency with MCC

Hi,
 
I am working on below setup:
MPLAB® X IDE 5.30
MPLAB® XC8 2.10
MPLAB® Code Configurator (MCC) Version: 3.95.0
MCU : PIC16F18456
Board: Custom Board
 
But I am unable to select Internal 32MHz Frequency with MCC ?
 
Please check attachments and advice.
 
--
Karan
 

Attached Image(s)

#1

5 Replies Related Threads

    W4GNS.
    Junior Member
    • Total Posts : 36
    • Reward points : 0
    • Joined: 2009/11/16 18:23:19
    • Location: Dixie
    • Status: offline
    Re: PIC16F18456 : How to Select Internal 32MHz Frequency with MCC 2020/07/08 09:55:11 (permalink)
    0
    set Clock Divider to 1.
    Ignore did not see unable to select
    post edited by W4GNS. - 2020/07/08 10:00:00
    #2
    karan123
    Super Member
    • Total Posts : 970
    • Reward points : 0
    • Joined: 2009/02/02 11:11:21
    • Location: 0
    • Status: offline
    Re: PIC16F18456 : How to Select Internal 32MHz Frequency with MCC 2020/07/08 10:07:12 (permalink)
    0
    W4GNS.
    set Clock Divider to 1.Ignore did not see unable to select

    Did not getting you..
    I already said didn't select that.. as in images.
    #3
    davea
    Super Member
    • Total Posts : 275
    • Reward points : 0
    • Joined: 2016/01/28 13:12:13
    • Location: Tampa Bay FL USA
    • Status: offline
    Re: PIC16F18456 : How to Select Internal 32MHz Frequency with MCC 2020/07/08 11:57:08 (permalink)
    0
    did you try the register tab
    to set it
    #4
    karan123
    Super Member
    • Total Posts : 970
    • Reward points : 0
    • Joined: 2009/02/02 11:11:21
    • Location: 0
    • Status: offline
    Re: PIC16F18456 : How to Select Internal 32MHz Frequency with MCC 2020/07/08 12:30:07 (permalink)
    0
    davea
    did you try the register tabto set it


    Yes, But same results . Can't select 32MHz .
    #5
    davea
    Super Member
    • Total Posts : 275
    • Reward points : 0
    • Joined: 2016/01/28 13:12:13
    • Location: Tampa Bay FL USA
    • Status: offline
    Re: PIC16F18456 : How to Select Internal 32MHz Frequency with MCC 2020/07/08 13:44:27 (permalink)
    0
    I would start a dummy project with that part and see if it will set to 32 Mhz
     
    edit what a crappy data sheet
    SET OSCCON1 = 0x10
    OSCFRQ = 0x05
    before the main start and see if it jumps to 32 Mhz
     
    post edited by davea - 2020/07/08 16:04:36
    #6
    Jump to:
    © 2020 APG vNext Commercial Version 4.5